Cat® D6N WH Waste Handler

Cat® D6N WH Waste Handler

From pushing trash to spreading cover, and cell construction to closing, Cat® Waste Handlers are designed and manufactured from the frame up to take on the demands of landfill work.

Engine Model
Cat C7.1 ACERT™
Flywheel Power
182 hp
Operating Weight
40818 lb
Net Power (Rated – 1,800 rpm): ISO 9249/SAE J1349 (DIN)
168 hp

Engine

Engine Model
Cat C7.1 ACERT™
Flywheel Power
182hp
Net Power (Rated – 1,800 rpm): ISO 9249/SAE J1349 (DIN)
168hp
Net Power (Maximum – 2,200 rpm): SAE J1995
182hp
Net Power (Maximum – 2,200 rpm): ISO 14396
178hp
Net Power (Rated – 1,800 rpm): ISO 9249/SAE J1349
166hp
Bore
4.1in
Stroke
5.3in
Displacement
433in3
Emissions
Tier 4 Final/Stage IV/Korea Tier 4 Final
Note
All non road Tier 4, Stage IIIB and IV, and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (EPA), 10 ppm (EU) (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are a
Note
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Net Power (Maximum – 2,200 rpm): ISO 14396 (DIN)
180hp
Note
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.

Weights

Operating Weight
40818lb
Operating Weight – XL Waste Handler
40818lb
Operating Weight – LGP Waste Handler
44749lb
Shipping Weight – XL Waste Handler
40029lb
Shipping Weight – LGP Waste Handler
43642lb

Blades – Capacity (SAE J1265)

XL VPAT Landfill*
8.29yd3
XL VPAT
4.3yd3
XL SU
5.6yd3
LGP VPAT Landfill*
7.39yd3
LGP VPAT
5.1yd3
Note
*Blade capacity with trash rack.

Dimensions – XL

Track Gauge
74.4in
Width of Tractor (without trunnions)
98.4in
Machine Height from Tip of Grouser to Exhaust Stack
122.4in
Length of Track on Ground
101.6in
Length of Basic Tractor (with drawbar)*
157.3in
Height of Grouser
2.6in
Ground Clearance
14.3in
Ground Pressure
6.7psi
Note
*Add 1185 mm (46.7 in) to length of basic tractor (with drawbar) with SU blade added. Add 957 mm (37.7 in) to length of basic tractor (with drawbar) with ripper (with tip at ground line).

Dimensions – LGP

Track Gauge
85.0in
Width of Tractor (without trunnions)
118.0in
Machine Height from Tip of Grouser to Exhaust Stack
126.9in
Length of Track on Ground
122.7in
Length of Basic Tractor (with drawbar)*
166.2in
Height of Grouser
2.2in
Ground Clearance
18.8in
Ground Pressure
4.5psi
Note
*Add 957 mm (37.7 in) to length of basic tractor (with drawbar) with ripper (with tip at ground line).

Transmission

0.5 Forward
1.6mph
0.7 Forward
1.7mph
1.0 Forward
2.1mph
1.5 Forward
2.7mph
1.7 Forward
3.0mph
2.0 Forward
3.6mph
2.5 Forward
4.7mph
2.7 Forward
5.2mph
3.0 Forward
6.1mph
0.5 Reverse
1.9mph
0.7 Reverse
2.1mph
1.0 Reverse
2.5mph
1.5 Reverse
3.4mph
1.7 Reverse
3.7mph
2.0 Reverse
4.4mph
2.5 Reverse
5.9mph
2.7 Reverse
6.5mph
3.0 Reverse
7.6mph

Blades – Width (over end bits)

XL VPAT Landfill*
10.23ft
XL VPAT
10.75ft
XL SU
10.33ft
LGP VPAT Landfill*
12.89ft
LGP VPAT
13.38ft
Note
*Blade capacity with trash rack.

Standard Equipment:

Optional Equipment: