D6K2 Track-Type Tractor

D6K2 Track-Type Tractor

The new D6K2 dozer is smarter and more efficient than ever. It comes equipped with standard Grade technologies like Slope Assist to make it easier for even less experienced operators to get more quality work done in less time. But intelligence is only part of the package – Eco Modes and a new power train deliver up to 17 percent more fuel efficiency, while providing superior maneuverability, faster steering response and greater capability to utilize full blade loads. This dozer also retains its optimal balance and undercarriage design for outstanding performance in finish grading applications. The D6K2 meets Tier 4 Final/Stage IV/Korea Tier 4 emission standards.

Engine Model
Cat® C4.4 ACERT™ with twin turbo
Flywheel Power
130 hp
Operating Weight
29258 lb
Note
*VPAT foldable blades have the same capacity and width as the XL/LGP VPAT blades.

Engine

Engine Model
Cat® C4.4 ACERT™ with twin turbo
Flywheel Power
130hp
Bore
4.13in
Stroke
4.99in
Displacement
268.5in3
Emissions
U.S. EPA Tier 4 Final/EU Stage IV/Korea Tier 4
Engine Power (Maximum) – SAE J1995
160hp
Engine Power (Maximum) – ISO 14396
157hp
Engine Power (Maximum) – ISO 14396 (DIN)
159hp
Net Power (Rated) – SAE J1349
128hp
Net Power (Rated) – ISO 9249
130hp
Note
All non road Tier 4 Interim and Final, Stage IIIB and IV, and Korea Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume
Note
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Note
Engine ratings at 2,200 rpm
Note
Net power advertised is the power available at the engine flywheel when the engine is equipped with the air cleaner, alternator, A/C compressor at full load and cooling fan at maximum speed.
Note
No engine derating required up to 3000 m (9,840 ft) altitude; beyond 3000 m (9,840 ft) automatic derating occurs.
Net Power (Rated) – ISO 9249 (DIN)
132hp

Weights

Operating Weight
29258lb
Note
Operating weights: includes EROPS, A/C, lights, VPAT Dozer, transmission, drawbar, engine enclosure, 3-valve hydraulics, 100% fuel, Cat Comfort Series air suspension seat and operator.
Operating Weight – XL
29258lb
Shipping Weight – XL
28651lb
Operating Weight – LGP
30664lb
Shipping Weight – LGP
30058lb
Note
Shipping weights: includes EROPS, A/C, lights, VPAT Dozer, transmission, drawbar, engine enclosure, 3-valve hydraulics, 10% fuel, Cat Comfort Series air suspension seat.

Blades

Note
*VPAT foldable blades have the same capacity and width as the XL/LGP VPAT blades.
Blade Capacity – XL, VPAT
4.26yd3
Blade Width Over End Bits – XL, VPAT
10.5ft
Blade Width Over End Bits – LGP, VPAT
12.0ft
Blade Type
VPAT, VPAT Foldable*
Blade Capacity – LGP, VPAT
4.98yd3

Undercarriage

Width of Shoe – XL
22in
Width of Shoe – LGP
30in
Shoes/Side – XL/LGP
40
Track Gauge – XL
70in
Track Gauge – LGP
79in
Track on Ground – XL/LGP
104in
Ground Contact Area (ISO 16754) – XL
5070in2
Ground Contact Area (ISO 16754) – LGP
6912in2
Track Rollers/Side – XL/LGP
8
Ground Pressure (ISO 16754) – XL
5.77psi
Ground Pressure (ISO 16754) – LGP
4.44psi
Grouser Height – MS Shoe
1.9in
Grouser Height – ES Shoe
2.2in

Service Refill Capacities

Fuel Tank
69gal
Cooling System
7.9gal
Final Drives (each XL and LGP)
4.9gal
Hydraulic Tank
16.9gal
DEF Tank
5gal
Engine Crankcase
2.9gal

Ripper

Each Additional Shank
75lb
Maximum Penetration Force – LGP
10138lb
Maximum Penetration Force – XL
9480lb
Maximum Pry-out Force – LGP
37480lb
Maximum Pry-out Force – XL
37480lb
Pocket Spacing
35.3in
Shank Gauge
70.6in
Shank Section
58.5 × 138 mm (2.3 × 5.4 in)
Weight with One Shank
1863lb
Type Fixed
Parallelogram
Number of Pockets
3
Overall Beam Width
76.8in
Beam Cross Section
165 × 211 mm (6.5 × 8.3 in)
Maximum Penetration – XL and LGP
14.2in

Winch

Drum Capacity (optional rope)
220ft
Optional Cable Size
0.87in
Maximum Bare Drum – Line Pull
50000lbf
Maximum Bare Drum – Line Speed
124ft/min
Maximum Full Drum – Line Pull
26000lbf
Maximum Full Drum – Line Speed
230ft/min
Cable Ferrule Size (O.D.)
2.13in
Rope Recommended Diameter
0.75in
Winch Drive
Hydrostatic
Winch Model
PA50
Cable Ferrule Size (length)
2.63in
Winch and Bracket Length
33.2in
Winch Case Width
29.1in
Drum Diameter
8in
Drum Width
11in
Flange Diameter
18in
Drum Capacity (recommended rope)
306ft
Weight*
2000lb
Note
*Weight includes: pump, operator controls, oil, mounting brackets and spacers.

Standards

FOPS
FOPS (Falling Object Protective Structure) meets ISO 3449-2005 Level II.
ROPS
ROPS (Rollover Protective Structure) offered by Caterpillar for the machine meets ROPS criteria ISO 3471:2008.
Brakes
Brakes meet the standard ISO 10265:2008.

Transmission – Travel Speed

Transmission Type
Hydrostatic
Forward
0-10 km/h (0-6.2 mph)
Reverse
0-10 km/h (0-6.2 mph)

Sustainability

Engine Emissions
Fully complies with Tier 4 Final/Stage IV/Korea Tier 4 emission standards
Vibration Levels
The hand/arm vibration of this machine is below 2.5 m/s2, for an experienced operator in a dozing application.
Vibration Levels
The whole body vibration information is available in Operation and Maintenance Manual SEBU8257.
Vibration Levels
The whole body vibration information is available in Pocket Guide HEGQ3339 “Driving Down Vibration.”
Vibration Levels
Operator’s seat meets input “spectral class EM6” according to ISO 7096:2000. Seat has a transmissibility factor of “SEAT<0.7.”

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.3 kg of refrigerant which has a CO2 equivalent of 1.859 metric tonnes.

Power and Efficiency

Designed for performance

Powerful Drive Train

A Cat C4.4 ACERT engine with twin turbochargers is combined with a new hydrostatic transmission to give you improved fuel efficiency and the most power-dense drive train in its size class. The hystat transmission offers superior maneuverability, faster steering response and greater capability to utilize full blade loads.

Eco Modes

Eco Modes optimize engine speed, while maintaining ground speed, saving up to 17 percent fuel in lighter blade load applications like finish grading.

Reduced Idling

Efficiency features reduce engine speed when idling, or shut the machine down after a specified time, to further save fuel and meet idling regulations. Engine Idle Shutdown shuts down engine after pre-set time to reduce idling and help save fuel.

Traction Control

New automatic traction control is standard and automatically reduces track slip in poor underfoot conditions, improving productivity and finish surface quality.

Effective Cooling

Updated cooling package allows more air flow, reducing fan speed for greater efficiency. Hydraulic demand fan automatically reduces fan speed in cooler conditions to help save fuel. An optional hydraulic reversing fan offers automatic or manual modes for changing direction to blow debris out of the radiator cores.

Operator Station

Comfort and Productivity

Spacious, quiet cab offers all-day comfort with wide door openings and an air suspension seat. Ergonomic, seat-mounted joystick controls isolate vibration. Excellent visibility to the blade, curbs and tight spaces help you work more precisely.

The new Liquid Crystal Display (LCD) is easy to read, enables Slope Assist, and is rear-camera ready so no additional monitor is needed.

Implement and Steering Controls

  • Single joystick for speed, direction and steering; includes thumb wheel for speed adjustment and traction control.
  • Dozer/implement controls give you 6-way control of the VPAT blade and allows power pitch adjustment. Blade shake feature helps shed sticky material.
  • Improved implement valve provides faster response. Intuitive, precise electro-hydraulic controls with sensitivity adjustment – fine, medium, coarse.
  • Rear vision camera (Optional) for enhanced visibility behind the machine.
  • Improved heating/ ventilation/air conditioning system cools faster; circulates air closer to the operator for more comfort.
  • New bi-directional control (Standard) – dial preselected forward/reverse gears for reduced effort and improved efficiency. Save the settings as operator profile for even more convenience.
  • Added comfort options like heated/ventilated seat and heated control handles.

Ease of Operation

Intuitive and precise

Whether the D6K2 is a permanent part of your fleet or rented for the short term, operators will find this machine easy to operate.

  • Technologies like Slope Assist and Stable Blade are integrated right into the dozer to help even less experienced operators achieve a quality grade more quickly, and with fewer inputs.
  • Joystick controls are intuitive and precise.
  • Machine balance and undercarriage are designed for faster finish grading.
  • A rear vision camera is available to enhance visibility behind the machine.
  • Machine width and folding blade option allow for easy transport.

Emissions Technology

Proven, integrated solutions

  • Meets Tier 4 Final/Stage IV/Korea Tier 4 emission standards.
  • Emissions technology that is transparent – no action required from the operator, no stopping for regeneration.
  • Diesel Exhaust Fluid (DEF) use typically about 2.5 percent of fuel consumption – provides excellent overall fluid efficiency.
  • Diesel Particulate Filter designed for the life of the engine – no need to clean out.
  • Pump automatically purges DEF lines to help prevent freezing.
  • When refilling Diesel Exhaust Fluid, a tone will sound (with key on) when tank is nearly full.

Integrated Technologies

Monitor, manage and enhance job site operations

Cat Connect makes smart use of technology and services to improve your job site efficiency. Using the data from technology equipped machines, you’ll get more information and insight into your equipment and operations than ever before.

Cat Connect services are also available from your dealership including:

Equipment Management – increase uptime and reduce operating costs.

Productivity – monitor production and manage job site efficiency.

Safety – enhance job site awareness to keep your people and equipment safe.

LINK Technologies

LINK technologies provide wireless capability to machines enabling two-way transfer of information collected by on-board sensors, control modules, and other Cat Connect technologies using off-board apps, such as our VisionLink® software.

Product Link™/VisionLink

Product Link takes the guesswork out of equipment management. Track location, hours, fuel usage, productivity, idle time, and diagnostic codes through the online VisionLink interface. Manage your fleet in real time so you can maximize efficiency, improve productivity, and lower operating costs.

GRADE for Dozers

Cat Connect GRADE technologies help you hit target grade faster and more accurately. Finish jobs in fewer passes, and with less operator effort, saving you time and helping you increase profit.

Cat GRADE with Slope Assist (Standard) helps operators more easily achieve the required main-fall and slope orientation of the blade by automatically maintaining pre-established blade angles for the grade. The system saves time, increases finish quality and reduces operator input. Experienced operators can work more productively and less experienced operators can achieve better quality results more quickly.

Cat Slope Indicate (Standard) displays machine cross-slope and fore/aft orientation on the primary monitor, helping operators work more accurately on slopes.

Cat Stable Blade (Standard) complements the operator’s blade-control input for attaining finish grades quicker with less effort.

Cat GRADE with 3D (Optional – available early 2017) is a factory integrated grade control system that enables operators to improve grading efficiency, accuracy, and productivity in both production dozing and fine-grading applications. The integrated design positions antennas on the cab roof, eliminating conventional blade-mounted masts and related cables. The AccuGrade Ready Option (ARO) is part of the package for added versatility, and AutoCarry™ is included to further boost productivity.

Cat AccuGrade (Optional) is a dealer-installed aftermarket grade-control system that provides increased grading versatility and the ability to scale capacity to changing needs, providing a choice of lasers for 2D flat-plane and slope work, Global Navigation Satellite System (GNSS) control for complex 3D cuts and contours, and/or systems using a Universal Total Station (UTS) for fine and finish grading.

AccuGrade Ready Option (ARO) (Optional) allows you to easily install or upgrade to AccuGrade 2D and 3D grade-control systems to add versatility and resale value to your machine.

Equipped for the Job

Optimize your machine

Blades

  • Rugged Variable Pitch Angle Tilt (VPAT) blade allows you to hydraulically adjust lift, angle and tilt for precise results.
  • Wide blade helps you get more work done in less time.
  • Blade shake feature for easy removal of material.
  • Folding blade option helps limit transport width.
  • Power pitch option lets you easily adjust blade to optimum pitch for your application using buttons on the right hand control.

Undercarriage

  • Optimized undercarriage – eight bottom rollers/two carrier rollers for smoother ride and improved finish grading. New equalizer bar design supports faster fine grading speed.
  • Choose Heavy Duty undercarriage for aggressive applications like land clearing, side-slopes or rocky terrain.
  • Choose SystemOne™ undercarriage that is designed to work and wear as a system for longer life and lower costs in abrasive or low/moderate impact applications.
  • A broad choice of track shoe designs and widths help you further optimize your machine for performance and longer life.

Rear Implements

To help you match your dozer to the task at hand, you can outfit your D6K2 with a multi-shank parallelogram ripper, winch or drawbar. A dual control package makes it simple to utilize either a ripper or winch.

Ask your Cat dealer for available options to help you optimize your machine for the work you do.

Forestry Arrangement

Specialized arrangement includes a forestry blade, hydrostatic winch, 360 degree guarding for added protection of the cab and a heavy-duty rear tank guard.

Serviceability and Customer Support

When uptime counts

Long service intervals and easy maintenance keep the machine up and running to help lower your owning and operating costs.

  • Large, hinged door on the left side of the engine compartment for easy access to all regular engine maintenance points.
  • Larger access panel to engine oil filter and new panel for easy access to fuel filter.
  • Easy ground-level access to hydraulic filters located in the left rear service compartment.
  • Grouped maintenance and diagnostic points.
  • Ground level access to Diesel Exhaust Fluid fill.
  • Updated track roller frame design for easier cleanout.
  • Optional bracket mounts to rear of machine to keep a shovel handy.
  • Optional onboard refueling pump is designed to make remote fueling from a fuel drum safer and faster.

Standard Equipment:

  • Power Train
    • Cat C4.4 ACERT diesel engine turbocharged
    • Tier 4 Final/Stage IV/Korea Tier 4 Certified Engine with Aftertreatment
    • Aftercooler, Air to Air (ATAAC)
    • Glowplug starting aid
    • 3000 meter altitude operation capability without derating
    • Hydraulically driven, variable speed fan
    • Aluminum bar plate cooling system (radiator, power train, aftercooler)
    • Air cleaner with integrated precleaner, dust ejector and under hood air intake
    • Dual path, electronic control, closed-loop hydrostatic transmission
    • Electric fuel priming pump
    • Fuel/water separator
    • Automatic Traction Control
    • Programmable/selectable bi‑directional speed control
    • Engine Idle Shutdown
    • Auto Engine Speed Control
  • Technology Products
    • Cat GRADE with Slope Assist
    • Cat Stable Blade
    • Cat Slope Indicate
    • Product Link ready cellular or satellite (Product Link licensing not available in all areas. Please consult your Cat dealer for details.)
  • Undercarriage
    • SystemOne or Heavy Duty undercarriage
    • Center tread, sprocketed idler with SystemOne, standard idler with HD
    • Lifetime lubricated track rollers (8) and idlers
    • Carrier rollers (2)
    • Hydraulic track adjusters
    • Guards, front/rear guiding
    • Replaceable sprocket rim segments
  • Hydraulics
    • Three valve hydraulics
    • Load sensing hydraulics
  • Electrical
    • Horn
    • Back-up alarm
    • 12V converter, 10A
    • Diagnostic connector
    • Batteries, heavy duty, maintenance free, 900 CCA
    • Integrated lights (4 front, 2 rear)
    • 100 Amp alternator (24 volt)
    • 24V electric starter
  • Operator Environment
    • ROPS/FOPS Cab
    • Integrated A/C with automatic temperature control
    • Seat, air suspended, cloth for cab
    • Seat belt, retractable 76 mm (3 in)
    • Foot pads, dash
    • Color graphic 178 mm (7 in)
    • Travel speed limiter, electronic
    • Engine RPM and gear display
    • Hour meter, electronic
    • Engine air cleaner service indicator, electronic
    • Water-in-fuel indicator, electronic
    • Throttle switch, rotary
    • Eco mode
    • Controls, seat mounted, fore/aft adjustment
    • Armrests, adjustable
    • Mirror, rearview, inside
    • Single pedal combining deceleration and braking functions
    • Independent forward/reverse speed settings
    • Power port, 12 volt
    • Coat hook
    • Storage compartment
    • Cup holder
    • Floor mat, rubber, heavy duty
    • Intermittent wiper
    • 12V radio ready (plug and play)
  • Fluids
    • Antifreeze coolant (–37° C/–34.6° F)
    • Extended life coolant
  • Other Standard Equipment
    • C-frame, variable pitch link, hydraulic cylinders and lines
    • Engine enclosures
    • Hinged radiator louvered grill
    • Swing-out radiator fan
    • Front pull device
    • Rigid drawbar
    • Vandalism protection
    • Ecology drains (engine, power train and implement oil, engine coolant)
    • Scheduled Oil Sampling (S∙O∙S) ports (engine, power train and implement oil)
    • Heavy duty crankcase guard
  • Instructions
    • Warning decals, ANSI, are included for machines in the U.S.A. only.

Optional Equipment:

  • Power Train
    • Fan, demand, reversing
  • Undercarriage
    • XL, SystemOne
    • XL, Heavy Duty
    • LGP, SystemOne
    • LGP, Heavy Duty
  • Tracks (40 Sections)
    • Track Pairs, XL, SystemOne: – Track, 510 mm (20 in), Moderate Service, XL – Track, 510 mm (20 in), Extreme Service, XL – Track, 560 mm (22 in), Moderate Service, XL – Track, 560 mm (22 in), Extreme Service, XL
    • Track Pairs, XL, Heavy Duty: – Track, 510 mm (20 in), Extreme Service, XL – Track, 560 mm (22 in), Extreme Service, XL
    • Track Pairs, LGP, SystemOne: – Track, 760 mm (30 in), Moderate Service, LGP – Track, 760 mm (30 in), Extreme Service, LGP
    • Track Pairs, LGP, Heavy Duty: – Track, 760 mm (30 in), Extreme Service, LGP – Track, 760 mm (30 in), Self-Cleaning, LGP
  • Track Guiding Guards
    • Guard, track guiding, center
    • Guard, track guiding, front/rear
    • Guard, track guiding, full length
  • Operator Environment
    • Cab, Comfort Package
    • Cab, Comfort Package, Heavy Duty
    • Suspension seat, heated and ventilated with heated joystick handles
    • Visibility kit, single rear vision camera
    • Radio, AM/FM/AUX/USB/Bluetooth
  • Hydraulics
    • Hydraulic oil, bio
  • Guards And Protection
    • Cab, protection package
    • Screen, rear
    • Protection package, standard
    • Protection package, front
    • Protection package, heavy duty
  • Blades
    • Blade, 3196 mm (126 in) ARO XL
    • Blade, 3196 mm (126 in) Foldable ARO XL
    • Blade, 3684 mm (145 in) ARO LGP
    • Blade, 3684 mm (145 in) Foldable ARO LGP
    • Mechanical blade pitch
    • Blade power pitch
  • Rear Attachments
    • Drawbar
    • Ripper, straight teeth
    • Ripper, curved teeth
    • Counterweight, rear
    • Counterweight, additional slabs
  • Rear Attachment Control
    • Ripper control
    • Winch control
    • Ripper and winch control
    • Ripper and Power Pitch control
    • Ripper, Winch and Power Pitch control
  • Technology Products
    • AccuGrade Ready
    • Cat GRADE with 3D (available early 2017)
    • Product Link Cellular
    • Product Link Satellite
    • Product Link Cellular and Satellite
  • Fuel Systems
    • Fuel tank, fast fuel and refill ready
  • Weather Packages And Starters
    • Cold Weather Package, 120V
    • Cold Weather Package, 240V
    • Electrical insulated breather
    • Starter standard
    • Starter high speed, low temperature
  • Fluids
    • Antifreeze, –50° C (–58° F)
  • Electrical
    • Beacon, rotating
  • Field Installed Attachments
    • Winch and fairleads: – PA50 winch, variable speed – Fairlead, three rollers – Kit, conversion, 4th roller – Winch step
  • Maintenance And Related Attachments
    • Shovel holder
    • Fuel pump, refilling
    • Oil change system, high speed