907M Compact Wheel Loader

907M Compact Wheel Loader

The Cat 907M Compact Wheel Loader delivers high performance with outstanding versatility. On-the-go operator tuned hydraulics and drive train adjust the machine’s response to the task at hand. Low sound levels, large spacious cab and intuitive controls keep you working comfortably all day long.

Maximum Gross Power: ISO 14396 (DIN)
74 hp
Operating Weight
12677 lb
Rated Bucket Capacity
1.31 yd3
Net Power
74 hp

Engine

Maximum Gross Power: ISO 14396 (DIN)
74hp
Net Power
74hp
Engine Model
Cat® C3.3B DIT*
Maximum Gross Power: SAE J1995
74hp
Maximum Gross Power: ISO 14396
73hp
Rated net power @ 2,400 rpm – SAE J1349
73hp
Rated net power @ 2,400 rpm – ISO 9249 (1977)/EEC 80/1269
74hp
Emissions
*The Cat C3.3B DIT engine meets U.S. EPA Tier 4 Final/EU Stage IIIB emission standards or Tier 4 Interim/Stage IIIA equivalent emission standards.
Maximum Gross Power
73hp
Maximum gross torque – ISO 14396
192lbf-ft
Maximum net torque – SAE J1349
189lbf-ft
Maximum net torque – ISO 9249 (1977)/EEC 80/1269
191lbf-ft
Displacement
201in3
Bore
3.7in
Stroke
4.7in
Note
Net power ratings are tested at the reference conditions for the specified standard.
Note
Net power shown is the power available at the flywheel when the engine is equipped with alternator, air cleaner, diesel exhaust filter, and fan at minimum speed.
Note
No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Note
Flywheel per the SAE reference conditions with the fan at maximum speed.
Note
The Cat C3.3B Tier 4 Final/Stage IIIB uses an active regeneration system which requires no operator interaction under normal conditions.

Weights

Operating Weight
12677lb
Note
Specifications shown are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, Dunlop 405/70 SPT9 tires, full fuel, comfort EROPS cab, standard flow hydraulics and skid-steer coupler. – 907M is configured w

Operating Specifications

Rated Bucket Capacity
1.31yd3
Full Turn Tipping Load
7716lb
Tipping load – straight (ISO 14397-1)
9007lb
Tipping load – full turn (ISO 14397-1)
7339lb
Clearance: full lift and 45° dump
7.97ft
Reach: full lift and 45° dump
2.60ft
Steering articulation angle each direction
39°

Loader Hydraulic System

Maximum flow – implement pump
19gal/min
Maximum flow – implement pump: Auxiliary function standard flow
19gal/min
Maximum flow – implement pump: Auxiliary function high flow
31gal/min
Maximum working pressure – implement pump
3408psi
Relief pressure – tilt cylinder head
4496psi
Relief pressure – tilt cylinder rod
2756psi
3rd function maximum working pressure
3408psi
Boost flow maximum pressure
3191psi
Lift cylinder: double acting – Bore diameter
3in
Lift cylinder: double acting – Rod diameter
2in
Lift cylinder: double acting – Stroke
27.4in
Tilt cylinder: double acting – Bore diameter
3.5in
Tilt cylinder: double acting – Rod diameter
2.2in
Tilt cylinder: double acting – Stroke
16.4in
Hydraulic cycle times (1,800 rpm): Raise (ground level to maximum lift)
5.5seconds
Hydraulic cycle times (1,800 rpm): Dump (at maximum lift height)
1.5seconds
Hydraulic cycle times (1,800 rpm): Float down (maximum lift to ground level)
2.6seconds
Hydraulic cycle times (1,800 rpm): Total cycle time
9.6seconds
Hydraulic cycle times (1,000 rpm): Raise (ground level to maximum lift)
9.6seconds
Hydraulic cycle times (1,000 rpm): Dump (at maximum lift height)
3seconds
Hydraulic cycle times (1,000 rpm): Float down (maximum lift to ground level)
2.6seconds

Service Refill Capacities

Cooling system
4.5gal
Fuel tank
20.6gal
Hydraulic system (including tank)
18.5gal
Engine crankcase
3gal
Transmission (gear box)
2.2gal
Axles – Front
N/A
Axles – Rear
N/A
Hydraulic tank
12.2gal

Dimensions with Bucket (Approximate): Standard Lift – with ISO Coupler

Height: ground to cab**
8.42ft
Height: ground clearance**
11in
Length: wheel base
7.08ft
Length: overall*
17.92ft
Reach: bucket at 45°*
2.33ft
Dig depth**
3.7in
Clearance: bucket at 45°*
8.08ft
Clearance: level bucket**
9.92ft
Height: bucket pin**
10.58ft
Width: bucket
6.67ft
Width: tread center
4.58ft
Turning radius: over bucket
14.67ft
Turning radius: inside of tires
7.33ft
Machine width
6.00ft
Dump angle at full lift
45°
Departure angle
33°
Articulation angle
39°
Operating weight
12913lb
Note
*Vary with bucket.
Note
**Vary with tire.
Note
Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires.

Dimensions with Bucket (Approximate): Standard Lift – with SSL Coupler

Height: ground to cab**
8.42ft
Height: ground clearance**
11in
Length: wheel base
7.08ft
Length: overall*
18.42ft
Reach: bucket at 45°*
2.67ft
Dig depth**
4.2in
Clearance: bucket at 45°*
7.67ft
Clearance: level bucket**
9.92ft
Height: bucket pin**
10.58ft
Width: bucket
6.67ft
Width: tread center
4.58ft
Turning radius: over bucket
14.67ft
Turning radius: inside of tires
7.33ft
Machine width
6.00ft
Dump angle at full lift
45°
Departure angle
33°
Articulation angle
39°
Operating weight
12913lb
Note
*Vary with bucket.
Note
**Vary with tire.
Note
Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires.

Buckets

Bucket Capacities
0.75 m3-1.2 m3 (1.0 yd3-1.6 yd3)
General purpose
1.31yd3
Light material
1.57yd3

Steering

Steering articulation angle each direction
39°
Steering cylinder: double acting – Bore diameter
3.1in
Steering cylinder: double acting – Rod diameter
1.4in
Steering cylinder: double acting – Stroke
11.8in
Nominal flow – steering pump
12gal/min
Maximum working pressure – steering pump
3191psi
Maximum steering torque – 0° (straight machine)
37155lbf-ft
Maximum steering torque – 39° (full turn)
27747lbf-ft
Steering ac cycle times (full left to full right) – 2,620 rpm
3seconds
Number of steering wheel turns – Full left to full right or full right to full left
<6 turns

Drive Train

Forward – Range 1
6mph
Forward – Range 2
12mph
Forward – High range
22mph
Reverse – Range 1
6mph
Reverse – Range 2
12mph
Reverse – High range
22mph

Tires

Option
335/80 R18 XZSL Michelin
Option
340/80 R18 AT-R Firestone
Option
340/80 R18 XMCL Michelin
Option
340/80 R18 TRI2 Nokian
Option
340/80 R18 Bibload Michelin
Option
405/70 R18 SPT9 Dunlop*
Option
12.5/80 R18 Flexport™
Note
*Standard tire.
Note
Other tire choices available, contact your Cat dealer for details.
Note
In certain applications, the loader’s productive capabilities may exceed the tires’ tonnes-km/h (ton-mph) capabilities.
Note
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Cab

ROPS
SAE J1040 MAY94, ISO 3471-1994.
FOPS
SAE J/ISO 3449 APR98, Level II, ISO 3449 1992 Level II.
Note
Cat cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note
When properly installed and maintained, the cab offered by Caterpillar, when tested with doors, and windows closed as per work cycle procedures specified in ISO 6395 2008, results in operator sound exposure Leq (Equivalent sound pressure level) of 66 dB(A

M Series Compact Wheel Loaders

A comprehensive range to suit all applications and environments.

907M

With more operating capacity than the 906M and a higher mounted cab, this model can work in applications where clearance is not critical.

  • 1.0 m3 (1.31 yd3) operating capacity
  • Standard height over cab
  • 18" rim size

Parallel Lift Loader Linkage

Cat Optimized Z-bar Loader delivers enhanced visibility with maximum productivity.

Cat Optimized Z-bar Loader

The Cat Optimized Z-bar Loader combines the digging efficiency of a traditional Z-bar with tool carrying capabilities for great performance and versatility.

  • Parallel lift and high tilt forces throughout the working range help you safely and confidently handle loads with precise control.
  • Linkage features excellent visibility to the bucket cutting edge and fork tips.

Industry Leading Operator Station

Superior visibility, ergonomics and comfort.

Best Seat on the Job Site

Enjoy all day comfort in the spacious M Series cab:

  • Low effort, responsive joystick includes integrated Forward/Neutral/Reverse switch, differential lock and continuous flow triggers along with proportional, third function auxiliary hydraulics.
  • Easy access to the cab with ergonomically placed grab rails, steps and large platform.
  • Low sound levels.
  • Superior visibility to the work tool due to the wide windshield and Cat Optimized Z-bar Loader.
  • Optional air conditioning with defrost/demist.
  • Optional heated, air suspension seat with lumbar and seat back tilt adjustment.

Easy to Use Instrument Panel and Display

The front console provides easy access to vital machine information, along with lights and ECO mode switches. ECO mode saves fuel and reduces engine wear with an engine speed control. The right hand console holds secondary functions beyond the all-in-one joystick controller.

  • New soft touch keypad on the right hand console contains new electronic functions and settings including Implement Modulation, Hystat Aggressiveness, Ride Control, Return To Dig, Engine Speed Control and Rimpull Control.
  • LCD read out for: travel speed, engine speed, speed range selection, hydraulic oil temperature, service hour meter, engine coolant temperature, and fuel level.
  • Indicators: diesel particulate filter, starting aid, engine, electrical, parking brake, directional turn signals, brakes, high beams, action required notice, continuous flow, hydraulic filter bypass, bucket float, creeper, directional F/N/R.

Power Train

Hydrostatic drive adjusts to be faster or smoother for the task.

Intelligent Power Management

The Cat power train is computer controlled which actively monitors engine, operator input and drive train load, adjusting the hystat transmission to keep the machine working at peak efficiency.

Engine

The Cat C3.3B turbo engine provides cleaner, quieter operation while delivering superior performance and durability. The engine also features:

  • The Cat C3.3B Tier 4 Final/Stage IIIB uses an active regeneration system which requires no operator interaction under normal conditions.
  • Automatic, electronic, self-priming fuel pump encourages good maintenance practice. At the service interval, simply install a clean, dry filter element and then turn the ignition key to ON.
  • The easily accessible diesel particulate filter has a minimum 3,000 hour cleaning service interval. The on-board monitor will advise when diesel ash cleaning service is needed.
  • Focused on fuel efficiency, significantly reducing owning and operating costs.

Transmission

  • The Hystat Aggressiveness feature allows the operator to increase the directional shift responsiveness for faster loading cycles, or adjust for finer control for sensitive tasks such as moving heavy pallets.
  • Rimpull Control feature enables the operator to match available tractive power to underfoot conditions, helping reduce tire wear.
  • Creeper Control precisely adjusts the machine ground speed when using work tools such as brooms and snow blowers.
  • Electronic Engine Speed Control feature allows you to maintain constant engine RPM regardless of travel speed.
  • Thus, pairing Creeper Control and Engine Speed Control, the operator can easily control the hydraulic power going to the work tool, while optimizing ground speed for best operation.
  • Three speed ranges ensure maximum controllability for any task.

Axles, Brakes and Inching Function

  • Fully locking front and rear differential axles are standard and can be engaged at full torque on-the-go below 6 km/h (4 mph), with a button on the joystick.
  • The enhanced modulation of the inching function utilizes the first half of brake pedal engagement to hydrostatically decelerate without any wear on the braking system.
  • The brake system includes independent service brakes on the front and rear axles. The parking brake is mechanically activated and released with a hand lever next to the operator’s seat.

Couplers

Making the Compact Wheel Loader even more versatile.

Horizontal Pin Coupler – A

This coupler is an evolution of the existing ISO horizontal pin coupler and thus has the in built durability and robust design that has been in the market place for many years.

This design gives a zero offset coupler from the machine, which optimizes the load capacity and breakout forces vs. some AEM solutions that are less integrated.

Horizontal Pin Coupler – ISO

This quick coupler will pick up a range of Cat Compact Wheel Loader work tools. The coupler along with the profiled loader arms have been designed to give maximum visibility to the work tool. A simple joystick function allows for easy engagement and disengagement of the locking pins.

Skid Steer Loader Coupler

The universal skid steer loader coupler allows the use of many Cat Skid Steer Loader work tools. Using either the standard or high flow hydraulic option, this coupler allows the M Series Compact Wheel Loaders to integrate into a skid steer loader fleet.

Hydraulics

Operator tuned hydraulics matches responsiveness to the task.

Hydraulic System

M Series machines feature a new electro-hydraulic control system, which allows the operator the ability to fine tune the machine based on the application and operator preference.

  • The new electronic joystick operation is finely tuned for smooth operation, yet fast cycle times.
  • The Implement Modulation feature provides three settings for faster, more responsive hydraulics for repetitive tasks like truck loading. Or, this feature can adjust for smoother hydraulics needed with heavy fork loads or more restrictive areas.
  • An electronic Return To Dig feature levels the bucket as the loader comes down after dumping. This speeds cycle times by letting the operator focus on the next dig point rather than setting the bucket position.
  • The third function auxiliary hydraulics can be set for Continuous Flow when using hydro-mechanical work tools.
  • Ride Control is available to smooth the ride, keep the tires in contact with the ground and maximize material retention.

Work Tools

Do more jobs with one machine.

The Right Tool for the Job

An extensive range of work tools and bucket styles are available to make your Cat Compact Wheel Loader one of the most versatile machines on the job site. Cat work tools are designed to get the best out of the machine and deliver excellent value through high productivity and long life.

Work Tools for Cat Horizontal Pin Coupler

The Cat Compact Wheel Loader offers a comprehensive range of buckets to suit any environment and specific customer needs. The buckets have been designed and engineered to endure the high breakout forces of the M Series Compact Wheel Loader.

The Cat fork carriage has been designed to increase visibility to the forks, allowing the operator to work much more efficiently and safely, without compromising durability. Various fork tine lengths are available.

Work Tools for Cat Skid Steer Loader Coupler

This coupler allows the use of a wide range of Cat Skid Steer Loader work tools including many hydro-mechanical work tools such as snow blowers, cold planers, brooms and wheel saws. It is recommended to check the work tool requirements to ensure the machine is configured for optimal performance with features such as High Flow and Return To Dig.

Auxiliary Lines and Connectors

The auxiliary lines and connectors are fitted as standard, meaning the Cat Compact Wheel Loader comes ready to work.

For a complete list of available work tools please consult your local Cat dealer.

Reliability and Durability

Quality within, quality throughout.

E-Coat Protection

Cat Compact Wheel Loaders undergo an extensive 24-Stage ‘E-Coat’ process. Zinc based electroplated undercoat and polyurethane topcoat provides unmatched corrosion resistant properties.

Heavy Duty Axles

The M Series Compact Wheel Loaders are fitted with heavy duty axles, with outboard planetary reduction gears.

Wiring

With heavy-duty braided wiring, Cat Compact Wheel Loaders offer great electrical durability. The water resistant sealed connectors prevent dust and moisture interfering with the electrics. Multicolored and numbered wiring is used for easy component identification.

Durable Design

Durability has been designed into the machine by offering protection to features such as the rear lights, loader arm and coupler greasing points.

Quality Throughout

High quality solid plastics, well-fitted rubber moldings make up the foundation of the M Series cab. Robust switches are used throughout, ensuring long life of components.

Options

Customize your machine to meet your needs.

Configure the Machine the Way You Want It

A variety of options are available on the Cat M Series Compact Wheel Loaders to suit your specific operator comfort and application needs. See your Cat dealer for more information about the features below and additional options.

  • Coupler Options
  • Turbine Precleaner
  • Road and Load Options
  • Additional Lights
  • Air Conditioning
  • Machine Security
  • Flexport™ Tires
  • Windshield Guard
  • High Flow Auxiliary Hydraulics
  • ECO Drains
  • Work Tool Electrical Harness
  • Product Link™

Serviceability

Easy service to keep your machine working.

All service points are easily accessible. The rear hoods large opening allows for easy access to the engine which features all service points located on one side for easy maintenance. Extended service intervals reduce service time and maximize uptime. Additional service features include:

  • Remote mounted fuel and hydraulic filters.
  • Convenient access door for coolant fill.
  • Caterpillar electric fuel priming pump for ease of service.
  • Easy access to battery terminals for jump starts.
  • Ground level access to all routine maintenance items.
  • Easy access to hydraulic and engine coolers, which can be separated for quick cleanout.
  • Product Link™ ready (standard).

Customer Support

Unmatched support makes the difference.

Renowned Cat Dealer Support

Your Cat dealer is ready to help you every step of the way. From new or used machine sales, to rental or rebuild options, your Cat dealer can provide an optimal solution to your business needs.

Unsurpassed worldwide parts availability, trained technicians and customer support agreements maximize your machine uptime.

For more information on Cat products, dealer services and industry solutions, visit us at www.cat.com.

Standard Equipment:

  • Transmission And Hydraulics
    • 100% differential lock on both axles, selectable on the move
    • 18° frame oscillation, 78° articulation
    • Demand based cooling fan
    • Hydrostatic drive
    • Loader arm float function
    • Parallel lift Z-bar loader
    • Proportional auxiliary hydraulic circuit
    • Transmission, 20 km/h (12.4 mph) with heavy duty axles
    • Transmission inching function
  • Engine
    • Cat C3.3B DIT Tier 4 Final/EU Stage IIIB or Tier 4 Interim/Stage IIIA engine
    • Cat extended life coolant
    • Closed circuit breather
    • Easy quick release fuel filter/water separator
    • ECO mode
    • Engine oil drain valve (non-spill ECO drain)
    • Lockable engine compartments
    • Two stage air cleaner with visual indicator
  • Electrical
    • Alternator 90 amp
    • Battery disconnect switch
    • Cab mounted fuse panel
    • Engine cold starter aid
    • Heavy duty battery, 12V
    • Service point connector for electronic diagnosis (Cat Electronic Technician)
    • Reversing alarm
  • General
    • E-coat paint primer
    • Pressure test points
    • Recovery hitch and pin
    • Scheduled Oil Sampling S·O·SSM ports
  • Operator Environment
    • Adjustable internal mirror
    • Adjustable wrist rest
    • Auxiliary power sockets
    • Coat hook
    • Cup holder
    • Digital service hour meter
    • Easy clean cab floor
    • Gauges: fuel hydraulic temperature, coolant temperature, speedometer
    • Multifunction joystick with direction control
    • On board digital display cluster
    • Operator station on isolation mounts
    • Retractable seat belt
    • ROPS and FOPS certified canopy/cab
    • Sound suppression
    • Sun visor
    • Suspended brake/accelerator pedals
    • Suspension seat
    • Two external knock back mirrors
    • Warning indicators for major systems
    • Warnings: master, park brake, hydraulic oil pressure, engine oil pressure, coolant temp, electrical system, hydraulic filter bypass

Optional Equipment:

  • Transmission And Hydraulics
    • Adjustable speed control (creeper control)
    • Adjustable high stat response settings
    • Electronic throttle lock
    • Ride control
    • Rimpull control
    • Speeder, 35 km/h (21.7 mph) with secondary steering
  • Engine
    • Engine block heater 120V
    • Precleaner for engine air filter
  • Electrical
    • Machine Security System (MSS)
    • Magnetic rotating beacon
    • Working lights, two front and two rear
    • Work tool wiring harness
  • General
    • Custom color
    • Rear light guards
    • Tire options including heavy duty tires
  • Fluids
    • Cat extended life coolant (–50° C/–58° F)
  • Loader
    • Adjustable implement modulation
    • High flow auxiliary hydraulics with pressure relieving quick disconnect manifold
    • Load check valves
    • Return To Dig tool positioner
  • Work Tools
    • For all work tool options, consult your local Cat dealer
  • Operator Environment
    • Air conditioning
    • Cabin light
    • Cat Radio/CD/MP3/WMA/AUX
    • Comfort cab includes: cloth suspension seat, heated rear window, sliding left window and radio ready)
    • Deluxe cab includes: Comfort cab options plus heated cloth air suspension seat with lumbar support and right sliding window
    • Heated rear window (enclosed cab)
    • Heater with window side and feet vents (enclosed cab)
    • Radio ready kit including speakers (enclosed cab)
    • Rear blind
    • Two doors (enclosed cab)
    • Wiper/washer front and rear (enclosed cab)