G3516C Gas Generator Set

G3516C Gas Generator Set

G3516C Generator Set

  • Continuous Rating 1660 ekW

  • Fuel Type Natural Gas

  • Maximum Electrical Efficiency 37.70%

  • Maximum Standby Rating 1500

Request a quote

Product Specifications

Specifications

Generator Set Specifications

  • Continuous Rating 1660 ekW

  • Frequency 50 / 60 Hz

  • Fuel Type Natural Gas

  • Maximum Electrical Efficiency 37.70%

  • Maximum Standby Rating 1500

  • RPM 1500/1800

Engine Specifications

  • Aspiration TA

  • Bore 6.7in

  • Displacement 4210in³

  • Engine Model G3516C

  • Stroke 7.5in

Generator Set Dimensions

  • Dry Weight - Genset 31226lb

  • Height 92in

  • Length 219in

  • Width 72in

Features

Equipment

Standard Equipment

  • Two-element single-stage air cleaner with enclosure and service indicator

  • EMCP 4.3

  • Jacket water and SCAC driven pumps and bypass lines

  • 2nd Stage SCAC-Cat Flange

  • Engine driven water pumps for jacket water and aftercooler

  • Jacket water and SCAC thermostats

  • ANSI/DN customer flange connections for JW inlet and outlet

  • Cat flanges on SCAC circuit

  • Integrated Sensing Module (ISM)

  • Cat-flanged face outlet on turbocharger

  • Provides exhaust port temperatures and stack temperature to customer supplied screen via CCM

  • Dry exhaust manifolds, insulated and shielded

  • 24V ETR Gas Shutoff Valve

  • Engine installed, fuel metering valve

  • Throttle plate, 24V DC actuator, controlled by ECM

  • Fuel system is sized for 31.5 to 47.2 MJ/NM3 dry pipeline natural gas with pressure of 10.2 to 34.5KPa to the engine fuel control valve

  • Fuel Filter

  • Individual Cylinder Detonation Sensitive Timing (DST)

  • Electronic Ignition System (controlled by ECM)

  • Electronic fuel metering valve

  • Anti-condensation space heater

  • Busbar connections

  • Class H Insulation & Class F temperature rise

  • Reactive Droop

  • Permanent Magnet Excitation

  • 3-phase brushless, salient pole

  • Caterpillar's Digital Voltage Regulator (CDVR) with 3-phase sensing and KVAR/PF control

  • SR4B

  • Winding temperature detectors

  • RH Service

  • Operation and maintenance manuals

  • Crankshaft Vibration Damper and Guard

  • Parts Book

  • 24V starting motors

Optional Equipment

  • Vertical, horizontal dual element air cleaner

  • Enclosure mounting brackets and piping

  • Air cleaner with precleaner

  • Local NFPA99-110 Alarm Module w/LEDs

  • Synchronizing Module

  • Remote 24V 8/16 Light Annunciator

  • Engine Failure Relay

  • PL1000E/PL1000T Communications Module

  • Custom 8-Light Alarm Module

  • Inlet/Outlet connections

  • Jacket water coolant heater

  • Aftercooler air lines, aftercooler core replacement

  • Flexible Fittings

  • 14" Flange Kit

  • 406 mm Elbow Kits

  • 406 mm flange kits

  • Mufflers (15/18/25 dBA Attenuation) and spark-arresting muffler with ANSI companion flanges

  • 16" Spark Arresting Muffler

  • 356-406mm Flange and Exhaust Expander

  • 15/18/25 dBA Muffler Attenuation

  • 207-276kPa, 30-40 psi gas knockdown regulator

  • 14-69 kPa (2-10 psi) gas pressure regulator

  • 24VDC Gas Shutoff Valve, Gas Knockdown Regulator

  • Fuel Filter, Gas Filter

  • Cable access box

  • 8.7/15 kV Cross, Differential, Current Transformers (CCCT, DCT, CT)

  • Medium and high voltage generators and attachment

  • 480/4160/13200 Volt Generator Options (60 Hz)

  • Generator air filter

  • Bearing temperature detectors

  • European Bus Bars

  • 415/400/380, 3300/6600/11000 Volt Generator Options (50 Hz)

  • Annunciator Modules

  • Generator Removal

  • Low voltage extension box

  • Load share module

  • Special paint order

  • Tool set

  • US AID Emblem

  • Barring group

  • Digital diagnostic tool

  • 60A, 24V charging alternator (requires engine driven pumps)

  • Battery removal

  • 20A battery charger

  • Battery disconnect switch

  • Battery with cables and rack (shipped loose)