Cat® C1.1 Industrial Power Unit

Cat® C1.1 Industrial Power Unit

C1.1 Industrial Power Units, with the rating: 17.9 bkW (24 bhp) @ 3000 rpm, meet EPA Tier 4 Interim equivalent emission standards. They are available for U.S. EPA Flexibility and for Europe and, depending on applicable emission standards, may be introduced in other regulated jurisdictions. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.

Minimum Rating
24.0 bhp
Maximum Rating
24.0 bhp
Emissions
U.S. EPA Tier 4 Interim Equivalent. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards.
Rated Speed
3000 rpm

Power Rating

Minimum Rating
24.0bhp
Maximum Rating
24.0bhp
Rated Speed
3000 rpm
Minimum Rating
24BHP
Maximum Rating
24BHP
Rated Speed
3000 rpm

Emission Standards

Emissions
U.S. EPA Tier 4 Interim Equivalent. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards.
Emissions
U.S. EPA Tier 4 Interim Equivalent. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards.

General

Engine Configuration
Inline 3, 4-Stroke-Cycle Diesel
Bore
77 mm (3.03 in)
Stroke
81 mm (3.19 in)
Displacement
1.131 L (69 in³)
Aspiration
Naturally Aspirated (NA)
Compression Ratio
23:1
Rotation (from flywheel end)
Counterclockwise
Cooling System Capacity
5.21 L (5.5 qt)
Lube System (refill)
4.9 L (5.2 qt)
Engine Configuration
Inline 3, 4-Stroke-Cycle Diesel
Bore
77 mm (3.03 in)
Stroke
81 mm (3.19 in)
Displacement
1.131 L (69 in³)
Aspiration
Naturally Aspirated (NA)
Compression Ratio
23:1
Rotation from Flywheel End
Counterclockwise
Cooling System - Capacity
5.21 L (5.5 qt)
Lube System - Refill
4.9 L (5.2 qt)

Power Unit Dimensions (Approximate. Final dimensions dependent on selected options)

Length
778 mm (30.6 in)
Width
438 mm (17.2 in)
Height
730 mm (28.7 in)

Power Unit Dimensions - Approximate

Height
730 mm (28.7 in)
Length
778 mm (30.6 in)
Width
438 mm (17.2 in)
Weight - Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
129 kg (284 lb)

Standard Equipment:

  • Air Inlet System
    • Inlet manifold
  • Control System
    • Alternator 12 volt 15 amp
    • Starter motor 12 volt
    • Glow plug starting aid
  • Cooling System
    • Belt-driven coolant pump
    • Coolant temperature switch
    • Mounted radiator and fan
  • Flywheel And Flywheel Housing
    • SAE No. 6 1/2 flywheel
    • SAE No. 5 flywheel housing
  • Fuel System
    • Fuel injection pump
    • Fuel filter
    • Electronic Shut-off Solenoid (ESOS)
  • Lube System
    • Spin-on lube oil filter
    • Lube oil pressure switch
    • Lube oil sump
  • Power Take Off (pto)
    • Provision for timing case rear facing PTO
  • General
    • Cast iron, engine block
    • Cast iron exhaust manifold--side outlet
    • Cold start capability to -20° C (-4° F)
    • Paint: Caterpillar yellow, with optional colors available at request

Optional Equipment: