Cat® C4.4 ACERT™ Diesel Engine

Cat® C4.4 ACERT™ Diesel Engine

The Cat® C4.4 ACERT Industrial Diesel Engine is offered in ratings ranging from 61.5-106 bkW (74.5-100 bhp) @ 2200 rpm. These ratings meet EPA Tier 3 equivalent, EU Stage IIIA equivalent emission standards. Industries and applications powered by C4.4 ACERT engines include: Agriculture, Aerial Lifts, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Compactors/Rollers, Compressors, Construction, Cranes, Crushers, Feller Bunchers, Forestry, Forklifts, General Industrial, Harvesters, Hydraulic Power Units, Irrigation Equipment, Loaders/Forwarders, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Sweepers, Paving Equipment, Pumps, Skidders, Specialty Ag Equipment, Sprayers, Trenchers, Turf and Landscaping and Underground Mining Equipment.

Minimum Power
82.5 bhp
Maximum Power
142.0 bhp
Emissions
China Nonroad III, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent
Rated Speed
2200 rpm

Power Rating

Minimum Power
82.5bhp
Maximum Power
142.0bhp
Rated Speed
2200 rpm
Minimum Power
82.5BHP
Maximum Power
142BHP
Rated Speed
2200 rpm

Emission Standards

Emissions
China Nonroad III, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent
Emissions
China Nonroad III, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent

General

Engine Configuration
Inline 4, 4-Stroke-Cycle Diesel
Bore
105 mm (4.13 in)
Stroke
127 mm (5.0 in)
Displacement
4.4 L (269 in³)
Aspiration
Turbocharged (T) or Turbocharged Aftercooled (TA)
Compression Ratio
16.2:1
Combustion System
Direct Injection
Rotation (from flywheel end)
Counterclockwise
Lube System (refill)
11 L (11.6 qt)
Engine Configuration
Inline 4, 4-Stroke-Cycle Diesel
Bore
105 mm (4.13 in)
Stroke
127 mm (5.0 in)
Aspiration
Turbocharged (T) or Turbocharged Aftercooled (TA)
Displacement
4.4 L (269 in³)
Compression Ratio
16.2:1
Combustion System
Direct Injection
Rotation from Flywheel End
Counterclockwise
Lube System - Refill
11 L (11.6 qt)

Engine Dimensions (Approximate. Final dimensions dependent on selected options)

Length
631 mm (24.8 in)
Width
626 mm (24.65 in)
Height
823.5 mm (32.4 in)
Weight, Net Dry (Basic Operating Engine Without Optional Attachments)
360 kg (793.7 lb)

Engine Dimensions - Approximate

Height
823.5 mm (32.4 in)
Length
631 mm (24.8 in)
Weight - Net Dry - Basic Operating Engine Without Optional Attachments
360 kg (793.7 lb)
Width
626 mm (24.65 in)

Standard Equipment:

  • Air Inlet System
    • Inlet manifold with choice of inlets.
  • Control System
    • Alternator
    • Starter motor
    • Glow plug starting aid
  • Flywheels And Flywheel Housing
    • SAE No. 3 flywheel housing
    • Flywheel and starter rings
  • Fuel System
    • Fuel filter positions
  • Lube System
    • Lubricating oil filters and breathers
    • Oil filter positions
    • Lube oil sump
  • Power Take Off
    • SAE B Power Take Off (PTO)
  • General
    • Paint: Caterpillar yellow, with optional colors available at request
    • Timing case and gear-driven auxiliaries
    • Belt-driven auxiliaries
    • Engine mountings
    • Gauges
    • Displays
    • Power and torque curve tailoring

Optional Equipment: