Operator Station On standard loaders with operator’s station, the hydraulic pilot joystick controls and rocker swing pedal are ergonomically designed for ease of operation and maximum loader control required for the high cycle millyard applications. The operator station is designed with comfort in mind. The spacious cabs feature a large, fully adjustable suspension seat with lumbar support. Fold-up armrests are fully adjustable to allow adjustment of the joystick controls to match the operator for ease of operation, increased performance. Excellent visibility of the work area is provided through large tinted cab windows. Overhead visibility is maximized through the large, tinted Lexan skylight. Operator protection is afforded through the front guard. This swing-out guard is designed for quick and simple access to allow cleaning of the front window. More >> link

Mounting System The Resilient Pad Mounting System includes a set of special rubber isolators on each mounting fastener that absorbs stress in two directions. An additional hydraulic accumulator is built into the main boom cylinder circuit to further absorb peak-load shocks. More >> link

Enclosed Components Weatherproof electric service panels include starters, controls, transformers, circuit breakers and fuse blocks. More >> link

Motor Options Electric motors range in horsepower from 75 to 100 hp and are totally enclosed and rated for severe duty. Power supply wiring packages provide for 440V/60Hz US or 575V/60Hz Canadian service. More >> link

Boom Length Options Heavy-duty boom options range in length from 7.6 m to 10.9m (25’ to 36’) for handling a variety of tree lengths. More >> link

Engine
Gross Power	75 hp
Operating Specifications
Knuckleboom Length	27 ft
Weights
Operating Weight	15315 lb
Hydraulic System
Cylinders - Stick	152 mm X 102 mm (6 in X 4 in)
Cylinders - Live Heel	127 mm X 76 mm (5 in X 3 in)
Operating Specifications
Swing Bearing Gearing	External
Hydraulic System
Cylinders - Main	152 mm X 102 mm (6 in X 4 in)
Hydraulic Pressure - System	2200 psi
Hydraulic Pressure - Swing	2400 psi
Swing Speed	8 RPM
Operating Specifications
Grapple Mounting Knuckle Length	9 in
Swing Bearing Diameter	43 in
Service Refill Capacities
Fuel Tank	42 gal
Hydraulic System
Hydraulic Flow	167/125/83 L/min (44/33/22 gpm)
Operating Specifications
Electric Power Supply	460 Volt: 60 Hz
Electric Motor	75 hp
Operating Weight	15315 lb
Dimensions
Maximum reach	30 ft

Standard Equipment
Motor Power Supply
Electric Motor, 56 kW (75 HP) @ 1800 RPM
Three (3) In-Line Gear Pumps
8.2 m (27’) Knuckleboom
Steel Mounting
Hydraulic System
460 Volt (60 Hz) Electric Power Supply
Radial Piston Swing Motor
22.8 cm (9”) Grapple Mounting Knuckle
Booms
Four (4) Ring High Voltage Collector Ring
Continuous Rotation
Structural
Service Panel, NEMA 12 Enclosure
Electro Hydraulic (EHC) Controls
Pump Drive, Direct Through Flex Coupling
Single Element Return (3 mic) Filtration
Across-the-line Magnetic Starting System
Filtration Bypass Indicators
Turntable Power Supply Mounting
Diagnostic Nipples @ Pump for serviceability

Optional Equipment
575 Volt (60 Hz) Electric Power Supply
Auxiliary Low Voltage Collector Ring
Remote Skid Power Supply Mounting
Non-Continuous Limited Rotation
Oil Reservoir Heater
7.6 m (25’) Knuckleboom
9.1 m (30’) Knuckleboom
30.5 cm (12”) Grapple Mounting Knuckle
Single “V” Heel
Double “VV” Heel
Concrete Mounting
30” Subframe Riser Mounting