D10T2 Dozer (US EPA Tier 4 Final)

D10T2 Dozer (US EPA Tier 4 Final)

Engine Model
Cat® C27 ACERT™
Number of Carrier Rollers
1 per side (optional)
Bore
5.4 in
Stroke
6.0 in

Engine

Engine Model
Cat® C27 ACERT™
Bore
5.4in
Stroke
6.0in
Displacement
1648.0in3
Note
*Excludes all fan losses.
Flywheel Power
600HP
Engine Power - Gross SAE J1995* (FWD/REV)
471/571 kW (632/766 HP)
Engine Power - ISO 14396 (FWD/REV)
462/562 kW (620/754 HP)
Engine Power - Net SAE J1349/ISO 9249 (FWD/REV)
447/538 kW (600/722 HP)
Engine Model
Cat® C27
Bore
5.4in
Stroke
6in
Displacement
1648in³
Note (1)
*Excludes all fan losses.
Net SAE J1349/ISO 9249 DIN (FWD/REV)
608/732 mhp
Engine Power - Net SAE J1349/ISO 9249 DIN (FWD/REV)
608/732 mhp
Emissions
U.S. EPA Tier 4 Final
Note (2)
Engine ratings apply at 1,800 rpm.
Note (3)
Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.
Note (4)
No derating (in FWD gears) required up to 4572 m (15,000 ft) altitude.
Note
Engine ratings apply at 1,800 rpm.
Note
Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.
Note
No derating (in FWD gears) required up to 4572 m (15,000 ft) altitude.
Emissions
U.S. EPA Tier 4 Final
Net SAE J1349/ISO 9249 (FWD/REV)
447/538 kW (600/722 HP)

Undercarriage

Number of Carrier Rollers
1 per side (optional)
Length of Track on Ground
152.8in
Shoe Type
Extreme Service (ES)
Width - Shoe
24in
Shoes/Side
44
Grouser Height
3.7in
Pitch
10.25in
Ground Clearance
28.5in
Track Gauge
100.4in
Ground Contact Area
7347in²
Track Rollers/Side
8
Length - Track on Ground
152.8in
Number of Carrier Rollers
1 per side (optional)

Transmission

Type
3-speed planetary powershift
1 Forward
2.5mile/h
2 Forward
4.5mile/h
3 Forward
7.9mile/h
1 Reverse
3.2mile/h
2 Reverse
5.6mile/h
3 Reverse
9.8mile/h
Transmission Clutch Diameter
17.1in
Type
3-speed planetary powershift

Service Refill Capacities

Fuel Tank
314.4gal
Cooling System
47.6gal
Note
*With oil filters.
Engine Crankcase*
18gal (US)
Power Train
60.8gal (US)
Final Drive - Each
6.1gal (US)
Roller Frames - Each
16.9gal (US)
Pivot Shaft Compartment
8.7gal (US)
Hydraulic Tank
34.6gal (US)
Fuel Tank
314.4gal (US)
Cooling System
47.6gal (US)
Note
*With oil filters.

Standards

FOPS
Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II.
ROPS
Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008.
Sound
The exterior sound pressure level for the standard machine (ISO 6395) is 115 dB(A)/111 dB(A) (sound suppressed).
Sound
The operator equivalent sound pressure level (ISO 6396) is 77 dB(A)/74 dB(A) (sound suppressed).
FOPS
Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II.
ROPS
Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008.
Sound (1)
The exterior sound pressure level for the standard machine (ISO 6395) is 115 dB(A)/111 dB(A) (sound suppressed).
Sound (2)
The operator equivalent sound pressure level (ISO 6396) is 77 dB(A)/74 dB(A) (sound suppressed).

Dimensions (Approximate)

Height (FOPS Cab)*
161.3in
Height (ROPS/Canopy)*
173.5in
Height (Top of Stack)*
171.5in
Length Basic Tractor with Drawbar
220.4in
Length with Multi-Shank Ripper
285.1in
Length with Single-Shank Ripper
278.8in
Length with U-Blade
305.1in
Overall Length SU-Blade and SS Ripper
360.6in
Overall Length Basic Tractor
209.6in
Track Gauge
100.4in
Width over Trunnions
147.1in
Ground Clearance*
28.5in
Length of Track on Ground
152.8in
Ground Clearance*
28.5in
Height - FOPS Cab*
161.3in
Height - ROPS/Canopy*
173.5in
Height - Top of Stack*
171.5in
Length - Basic Tractor - With Drawbar
220.4in
Length - Track on Ground
152.8in
Length - With SU-Blade
292in
Length - With Multi-Shank Ripper
285.1in
Length - With Single-Shank Ripper
278.8in
Length - With U-Blade
305.1in
Overall Length - Basic Tractor
209.6in
Overall Length - SU-Blade/SS Ripper
360.6in
Track Gauge
100.4in
Width - Over Trunnions
147.1in
Width - Without Trunnions - 610 mm/24 in ES
129.6in
Drawbar Height (Center of Clevis)
34in
Note
*Includes grouser height for total dimensions on hard surfaces.
Note
*Includes grouser height for total dimensions on hard surfaces.

Weights

Operating Weight
154700lb
Shipping Weight
109775lb
Note (1)
D10T2 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm/24 in ES shoes, and operator.
Note (2)
D10T2 Shipping Weight includes coolant, lubricants, 10% fuel, FOPS cab, fast fuel, and 610 mm/24 in ES shoes.
Note
D10T2 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm/24 in ES shoes, and operator.
Note
D10T2 Shipping Weight includes coolant, lubricants, 10% fuel, FOPS cab, fast fuel, and 610 mm/24 in ES shoes.

Hydraulic Controls

Pump Type
Variable displacement piston
Bulldozer Relief Valve Setting
4061psi
Tilt Cylinder Relief Valve Setting
2944psi
Ripper - Lift - Relief Valve Setting
4061psi
Ripper - Pitch - Relief Valve Setting
4061psi
Combined Pump Output - Implement
100.4gal/min
Note (1)
Pump output measured at 1,800 rpm engine speed.
Note (2)
Electro-hydraulic pilot valves assist operations of ripper and dozer controls.
Note (3)
Complete system consists of pump, tank with filter, oil cooler, valves, lines, and control levers.
Note
Pump output measured at 1,800 rpm engine speed.
Note
Electro-hydraulic pilot valves assist operations of ripper and dozer controls.
Note
Complete system consists of pump, tank with filter, oil cooler, valves, lines, and control levers.

Steering and Brakes

Hydraulically Applied Multiple-disc Steering Clutch
15.4in
Spring Applied Multiple-disc Brake
15.4in

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (3.0 tons).
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (3.0 tons).

Track Roller Frame

Oscillation
13.8in

Standard Equipment:

  • Electrical
    • Alternator, 150 amp
    • Back up alarm
    • Batteries, 12-volt (2), 200 amp-hour
    • Converter, 12-volt, 10 amp and 20 amp
    • Diagnostic connector
    • Horn, forward warning
    • Light, engine compartment
    • Lighting system, 8 Halogen
    • Starting receptacle
  • Operator Environment
    • Air conditioner and heater
    • Armrest, adjustable
    • Cab, FOPS
    • Deactivation switch, hydraulic controls
    • Decelerator, pedal
    • Finger Tip Control (FTC) steering
    • Governor switch, electronic
    • Hydraulic system, electronically controlled
    • Information display – Multi-color
    • Mirror, rearview
    • Radio ready, entertainment
    • ROPS rollbar
    • Seat belt, retractable 76 mm (3 in)
    • Seat, cloth, air suspension
    • Wipers, intermittent, low and high speeds
    • Work monitor
  • Power Train
    • Aluminum bar-plate radiator, 6 fpi
    • Aftercooler, air-to-air
    • Air filters, dual with precleaner
    • Cat C27
    • Coolant, extended life
    • Shift management:
      – Advanced Productivity Electronic Control System (APECS)
      – Enhanced AutoShift (EAS)
    • Engine Idler Shutdown Timer
    • Ether starting aid, automatic
    • Hydraulic demand fan
    • Fast fuel system
    • Four planet, double-reduction planetary final drives
    • Fuel priming pump, electric
    • High speed oil change system
    • Mufflers, dual
    • Parking brake, electronic
    • Prescreener
    • Separator, water/fuel
    • Thermal shields, exhaust
    • Torque divider
    • Transmission, powershift:
      – (3F/3R speeds)
  • Safety And Security
    • Anchorage points
    • Fender guard rails
    • Heavy duty steps and handles
    • Operator Not Present Monitoring System
    • Seat belt warning system
    • Slope and side-slope monitor
  • Undercarriage
    • 610 mm (24 in) Extreme Service track shoe
    • Equalizer bar end pin grease fittings, remote
    • Rollers and idlers, lifetime lubricated
    • Sprocket rim segments, replaceable
    • Suspension-type undercarriage, eight-roller tubular track roller frame (carrier roller ready)
    • Three bolt idler caps
    • Track adjusters, hydraulic
    • Track guides
    • Two-piece master links
  • Other Standard Equipment
    • Auto-blade assist – Dual tilt required
    • Bottom guard
    • CD ROM parts book
    • Ecology drains
    • Engine enclosure
    • Fluid sampling ports
    • Grade control ready
    • Ground level service center
    • Hydraulic system, electronically controlled load sensing
    • Mounting, lift cylinders
    • Ripper hydraulics
    • Vandalism, protection (8 caplocks)
    • VIMS 3G
    • Product Link (Satellite)

Optional Equipment:

  • Bulldozer Attachments
    • 10SU Abrasion resistant blade
    • 10SU Abrasion resistant blade, black
    • 10SU Push plate
    • 10U No wear plate
    • 10U Abrasion resistant blade
    • 10U Abrasion resistant blade, black
  • Guards
    • Bottom guards, cushion dozer
    • Bottom guards, front counterweight
    • Bottom guards, partial
    • Bottom guards, sealed
    • Guard, fan debris
    • Guard, undercarriage idlers
    • Mounting GP, rear screen
    • Screens, grill door
  • Operator Station
    • Air conditioner:
      – Fender
      – ROPS
    • Cab glass:
      – 276 kPa (40 psi)
      – Dual pane impact resistance glass
    • Operator arrangement:
      – 5th Percentile Arrangement
      – Quick opening floor plates
    • Powered precleaner
    • Seat, air suspension:
      – Cloth, heated and ventilated
      – Vinyl
    • Visibility arrangement:
      – Single camera
      – Dual camera
      – Mirrors
    • Window shades
  • Power Train
    • Coolant, arctic
    • Engine prelube
    • Final drives:
      – Clamshell guard
      – Cold weather
      – Guarded
    • Lubrication, arctic
    • Copper Grommetted Tube Radiator
    • Reversible cooling fan
    • Remote high speed oil change system:
      – Ripper
      – Counterweight
  • Rear Attachments
    • Counterweight:
      – 3 slab with hitch
      – 4 slab with hitch
    • CapSure hammerless installation and positive retention system:
      – Single shank
      – Multi shank
      – Single shank deep
    • Drawbar, rear
    • Multi shank ripper:
      – Deep shank
      – Standard shank
    • Single shank ripper:
      – Push block with pin puller
      – Standard shank
      – Standard shank with pin puller
    • Ripper mounting:
      – Standard
      – Wide track
  • Safety And Security
    • Access arrangement
    • Fire suppression ready
    • Fire suppression installation
    • Fuel tank, platform ready
    • Lights:
      – Halogen, twelve
      – HID
      – LED
      – LED, high intensity
    • Powered access ladder
    • Rear access platform
  • Special Arrangements
    • High debris
    • Sound
    • Stockpile
  • Technology
    • Machine control, performance:
      – AutoCarry
      – Automatic ripper control
    • Command for Dozing
    • Terrain for Grading:
      – with blade control
  • Undercarriage
    • Carrier rollers
    • Carrier rollers, cold weather
    • Tracks, PPR, sealed and lubricated:
      – 610 mm (24 in) Extreme Service Trapezoidal Hole
      – 610 mm (24 in) Super Extreme Service
      – 610 mm (24 in) Extreme Service Scallop Resistant
      – 610 mm (24 in) Super Extreme Service Scallop Resistant
      – 610 mm (24 in) Super Extreme Service Scallop Resistant Round Hole
      – 710 mm (28 in) Extreme Service
      – 710 mm (28 in) Super Extreme Service
      – 710 mm (28 in) Extreme Service Trapezoidal Hole
      – 710 mm (28 in) Extreme Service Scallop Resistant
      – 710 mm (28 in) Super Extreme Service Scallop Resistant
      – 710 mm (28 in) Super Extreme Service Scallop Resistant Round Hole
      – 760 mm (30 in) Extreme Service Clipped
      – 760 mm (30 in) Super Extreme Service Clipped
      – 786 mm (31 in) Extreme Service
      – 786 mm (31 in) Extreme Service Trapezoidal Hole
      – 786 mm (31 in) Extreme Service Scallop Resistant ARM
    • Undercarriage arrangements:
      – Abrasion resistant
      – Cold abrasion
      – Cold weather
      – Guarded
      – Sound
  • Other Attachments
    • Automatic lubrication system
    • Fire suppression ready
    • Fire suppression installation
    • Fuel lines, heater
    • Grease points, grouped
    • Heater, engine coolant
    • Hydraulic, dual tilt
    • Hydraulic, dual tilt, cushion dozer
    • Hydraulic, single tilt, cushion dozer
    • Main frame, cushion dozer
    • Starting cold weather