797F Mining Truck

Nominal Payload Capacity
400 tons
Engine Model
Cat® C175-20
Gross Power - SAE J1995
4000 hp
Target Gross Machine Operating Weight (GMW)
1375000 lb

Operating Specifications

Nominal Payload Capacity
400tons
Top Speed – Loaded
42mph
Steer Angle
40Degrees
Turning Circle Clearance Diameter
138.0ft
Nominal Payload Capacity
401ton (US)
Steer Angle
40°
Top Speed - Loaded
42mile/h
Heaped SAE (2:1) Capacity
240-267 m³ (314-350 yd³)
Machine Clearance Turning Diameter
138ft

Engine

Engine Model
Cat® C175-20
Gross Power - SAE J1995
4000hp
Bore
6.9in
Stroke
8.7in
Displacement
6469in3
Note
Power ratings apply at 1,750 rpm when tested under the specific conditions for the specified standard.
Note
Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 99 kPa (29.32 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (69° F) and an LHV of 42 780 kJ/kg (18,390 Btu/lb) when engine is used at 30° C (38° F).
Engine Model
Cat® C175-20
Gross Power - SAE J1995
4000HP
Bore
6.9in
Stroke
8.7in
Displacement
6469in³
Note (1)
Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
Note (2)
U.S. EPA Tier 4 Final available for applicable markets.
Net Power - SAE J1349
3795HP
Rated Speed
1750r/min
Emissions
U.S. EPA Compliant. Where applicable, the Cat C175-20 engine is compliant with U.S. EPA emission standards.Tier 4 engine option available to meet Tier 4 Final emission standards.
Note (3)
High Altitude Low Maintenance Ratio Engine Configuration (4x4) option available.
Note (4)
No high altitude arrangement (HAA) engine derating required up to 4877 m (16,000 ft) altitude.
Note
No low altitude arrangement (LAA) engine derating required up to 2134 m (7,000 ft) altitude.
Note
No high altitude arrangement (HAA) engine derating required up to 4877 m (16,000 ft) altitude.
Emissions
U.S. EPA Compliant. Where applicable, the Cat C175-20 engine is compliant with U.S. EPA emission standards.

Weights – Approximate

Target Gross Machine Operating Weight (GMW)
1375000lb
Note
Refer to the Cat Mining Truck 10/10/20 Payload Policy for maximum gross machine weight limitations.
Note
Body weight varies depending on body and liner configuration. Weight range for known applications.
Note
Chassis weight with 100 percent fuel, hoist, body mounting group, rims and tires.

Transmission

Forward 1
7.0mph
Forward 2
9.5mph
Forward 3
12.7mph
Forward 4
17.2mph
Forward 5
23.1mph
Forward 6
31.2mph
Forward 7
42.0mph
Reverse
7.4mph
Forward - 1
6.6mile/h
Forward - 2
8.9mile/h
Forward - 3
12mile/h
Forward - 4
16.2mile/h
Forward - 5
21.8mile/h
Forward - 6
29.4mile/h
Forward - 7
39.5mile/h
Reverse
7.4mile/h
Top Speed - Loaded
39.5mile/h

Final Drives

Differential Ratio
1.276:1
Planetary Ratio
16.67:1
Total Reduction Ratio
21.26:1
Differential Ratio
1.276:1
Planetary Ratio
16.67:1
Total Reduction Ratio
21.26:1
Note
Double reduction, planetary with full floating axles.
Note
Double reduction, planetary with full floating axles.

Suspension

Effective Cylinder Stroke – Front
12.3in
Effective Cylinder Stroke – Rear
6.5in
Rear Axle Oscillation
±4.0 degrees
Rear axle - Oscillation
±3.96 degrees
Effective Cylinder Stroke - Front
3.9in
Effective Cylinder Stroke - Rear
3.7in

Brakes

Number of Discs per Side – Front
10
Number of Discs per Side – Rear
15
Brake Surface
51243in²
Standards
ISO 3450:2011
Number of Discs per Side - Front
10
Number of Discs per Side - Rear
15

Body Hoists

Pump Flow – High Idle
317.0gal/min
Relief Valve Setting – Raise
3510.0psi
Body Raise Time – High Idle
25.0Seconds
High Idle Body Lower Time - Float
19s
Body Raise Time - High Idle
26s
Pump Flow - High Idle
317gal/min
Relief Valve Setting - Raise
3510psi
Body Lower Time - Float
18s
Body Power Down- High Idle
19s

Service Refill Capacities

Fuel Tank
1000gal
Cooling System
306.0gal
Crankcase
84.0gal
Steering Tank
67.0gal
Steering System (Includes Tank)
94.0gal
Brake/Hoist System (Includes Tank)
441.0gal
Differentials
311.0gal
Final Drives, Each
49.0gal
DEF Tank
99gal (US)
Brake/Hoist Hydraulic Lines
219gal (US)
Note (1)
DEF Tank only available for EPA Tier 4 engine option.
Brake/Hoist Tank
203gal (US)
Front Wheels - Each
16gal (US)
Torque Converter Sump
80gal (US)
Torque Converter/Transmission System - Including Sump
166gal (US)
Cooling System
306gal (US)
Crankcase
103gal (US)
Steering Tank
67gal (US)
Steering System - Including Tank
95gal (US)
Brake Hoist System - Includes Tank
489gal (US)
Differentials
330gal (US)
Final Drive - Each
49gal (US)
Fuel Tank
1000gal (US)
Diesel Exhaust Fluid Tank
100gal (US)

Weight Distributions – Approximate

Front Axle – Loaded
33.3%
Rear Axle – Loaded
66.7%
Front Axle – Empty
47.2%
Rear Axle – Empty
52.8%

Approximate Weights – MSD II

Front Axle – Empty
47.2%
Front Axle – Loaded
33.3%
Rear Axle – Empty
52.8%
Rear Axle – Loaded
66.7%

Dimensions

Overall Body Length
48.6ft
Inside Body Length
32.75ft
Overall Length
49.5ft
Wheelbase
23.58ft
Rear Axle to Tail
12.9ft
Dump Clearance
6.58ft
Loading Height – Empty
23.0ft
Inside Body Depth – Maximum
11.0ft
Overall Height – Body Raised
51.5ft
Centerline Front Tire Width
21.41ft
Engine Guard Clearance – Loaded
3.33ft
Overall Canopy Width
29.91ft
Outside Body Width
32.0ft
Inside Body Width
27.91ft
Rear Axle Clearance – Loaded
3.08ft
Centerline Rear Dual Tire Width
20.41ft
Overall Tire Width
31.25ft
Front Canopy Height - Empty
25.33ft
Loaded Ground Clearance
2.58ft
Height - Top of ROPS - Empty
21.4ft
Engine Guard Clearance - Loaded
3.33ft
Inside Body Depth - Maximum
11ft
Loading Height - Empty
23ft
Overall Height - Body Raised
51.5ft
Rear Axle - Clearance - Loaded
3.08ft
Overall Body Length
48.6ft
Inside Body Length
32.75ft
Overall Length
49.5ft
Wheel Base
23.58ft
Rear Axle - Tail
12.9ft
Dump Clearance
6.58ft
Centerline Front Tire Width
21.41ft
Overall Canopy Width
29.91ft
Outside Body Width
32ft
Inside Body Width
27.91ft
Centerline of Rear Dual Tire Width
20.41ft
Overall Tire Width
31.25ft

Sound

Sound Standards
The operator sound pressure level measured according to work cycle procedures specified in ISO 6394:2008 and 6396:2008 is 76 dB(A) for cab offered by Caterpillar when properly installed and maintained and tested with doors and windows closed.
Sound Standards (1)
The operator sound pressure level measured according to work cycle procedures specified in ISO 6394:2008 and 6396:2008 is 76 dB(A) for cab offered by Caterpillar when properly installed and maintained and tested with doors and windows closed.
Sound Standards (2)
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.
Sound Standards
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.

Steering

Steering Standards
ISO 5010:2007
Steering Angle
40°
Turning Diameter - Front
122.7ft
Note
Turning Diameter (ISO 7457:2009)
Steering Standards
ISO 5010:2007
Steer Angle
40°

Tires

Tire
59/80R63 – Michelin or Bridgestone
Tires
59/80 R63
Note (1)
Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.
Note
Quick Change Rims optional.
Note
Productive capabilities of the 797F are such that, under certain job conditions, TKPH (TMPH) capabilities of standard tires could be exceeded and, therefore, limit production.

Braking System

Outside Diameter
42in
Note
Anti-Lock Brake System (ABS) optional with CMD package
Service Brakes
Service Brakes: Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated
Front Wet Disc Brake Surface Area
20500in²
Rear - Wet Disc Brake Surface Area
30750in²
Standards
Service and Secondary: ISO 3450:2011
Parking Brake
Four-corner, Multi-disk, Spring Applied, Hydraulically Released

Weights - Approximate

Target Gross Machine Operating Weight (GMW)
1375000lb
Body Weight
94799lb
Note (1)
Consult your tire manufacturer for maximum tire load
Note (2)
Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires.
Note (3)
Chassis weight with 100 percent fuel, hoist, body mounting group, rims and tires.
Chassis Weight
474472lb
Rated Gross Machine Weight
1375000lb
Body Weight Range
41 368-61 235 kg (91,200-135,000 lb)
Chassis Weight Range
210 630-219 146 kg (464,359-483,134 lb)

Approximate Weights - MSD II

Front Axle - Empty
47.20%
Front Axle - Loaded
33.30%
Rear Axle - Empty
52.80%
Rear Axle - Loaded
66.70%

Weight Distributions - Approximate

Front Axle - Empty
47.2%
Front Axle - Loaded
33.3%
Rear Axle - Empty
52.8%
Rear Axle - Loaded
66.7%

Capacity - MSD II - 100% Fill Factor

Heaped (SAE 2:1)
240-267 m³ (314-350 yd³)
Struck
188-213 m³ (246-290 yd³)
Note
Consult your local Cat dealer for truck body recommendations.

Capacity - HP Body - 100% Fill Factor

Heaped (SAE 2:1)*
330 yd³ / 252 m³
Struck
225 yd³ / 172 m³
Note (1)
Consult your local Cat dealer for body recommendations.

Cab

ROPS Standards (2)
ROPS (Rollover Protective Structure) meets ISO 3471:2008 criteria.
Air Conditioning
HFC - 134A refrigerant: 24,300 Btu/h
Note
Ambient capabilities down to -30C (-22F) for heater/defroster and up to 50C (122F) for air conditioning.
ROPS Standards (1)
The operator sound pressure level, 76 dB(A), complies with ISO 6394:2008 and ISO 6396:2008.
FOPS Standards
FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II criteria.

ROPS

ROPS Standards
ROPS (Rollover Protective Structure) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria.
FOPS Standards
FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II FOPS criteria.
FOPS Standards
FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II FOPS criteria.

Standard Equipment:

  • Electrical
    • Alarm, back-up
    • Brushless, alternator, 150 ampere
    • Batteries, 12V (2) 93 amp-hour
    • Converter, 12V electrical
    • Electrical system, 24V, 10, 20 and 25 amp
    • Battery charge receptacle
    • Lighting system:
      – Back-up and hazard lights
      – Directional signals (front, rear LED)
      – Front stair access/Service deck
      – Stop/tail lights (LED)
      – Engine compartment
      – VIMS, blue light (LED)
      – Headlights with lo-hi beam selector
  • Operator Environment
    • Standard cab:
      – Standard optimized operator seats
      – Suspension trainer seat
      – Flip down front visor
      – Standard side of cab access
    • Deluxe cab:
      – Heated and ventilated seats
      – Suspension trainer seat
      – Retractable front visor
      – Rear of cab access and standard side of cab access
      – Power windows
    • Deluxe cold weather cab:
      – Heated and ventilated seats
      – Suspension trainer seat
      – Retractable front visor
      – Rear of cab access and standard side of cab access
      – Power windows
      – Heated mirrors
    • All cab options include the following features:
      • Air conditioner with automatic climate control
      • 12V DC power supply (3)
      • Coat hook
      • Diagnostic connection port
      • Dome courtesy light
      • Entertainment radio ready 5 amp converter, speakers and wiring harness
      • Gauges/Indicators:
        – Gauge panel: Transmission fluid temperature; Brake oil temperature; Engine coolant temperature; Fuel level; Torque converter oil temperature
        – Electric engine control fault indicator
        – Electric hour meter
        – Speedometer
        – Tachometer
        – Transmission gear indicator
        – VIMS message center with advisor
      • Heater/defroster (11 070 kCal/43,930 Btu)
      • Horn
      • Cat Detect System
      • Storage compartments
      • Hoist, body control (electric)
      • ROPS cab, insulated/sound suppressed
      • Seat, operator, air suspension
      • Seatbelt, operator, three-points, retractable
      • Seat, trainer, air suspension
      • Seatbelt, trainer, two-points, retractable
      • Stairway and walkway access, 600 mm (23.6 in)
      • Steering wheel, multi tilt, padded, telescopic
      • Tinted glass
      • Window, operator, electric powered
      • Windshield wiper, intermittent control and washer
      • Cup holder
      • Mirrors, right and left
  • Power Train
    • C175-20 emits equivalent to Tier 2 emission standards:
      – Turbocharging (4)/Air-to-Air Aftercooler (ATAAC)
      – Air cleaner with precleaner (4)
      – Ground level engine shutdown
      – Ether starting aid (automatic)
      – Elevated low idle control
      – Crankcase protection
      – Multi-point oil pressure sensing
      – Automatic starter protection
    • Braking system:
      – Park brake integrated with gear selector
      – Brake release motor (towing)
      – Oil-cooled, multi-disc (front and rear) – service, retarding, parking, secondary
      – Automatic Retarder Control, adjustable
      – Engine overspeed protection
      – Extended life brake disc material
    • Transmission:
      – 7-speed, automatic powershift with electronic controls (ECPC)
      – Body-up shift inhibitor
      – Controlled throttle shifting
      – Directional shift management
      – Neutral coast inhibitor
      – Neutral start switch
      – Downshift/Reverse shift inhibitor
      – Individual clutch modulation
      – Body-up reverse neutralizer
      – Programmable top speed
      – Lock-up torque converter
    • Pre-lubrication/engine
    • Rear axle continuous lubrication/filtration
  • Other Standard Equipment
    • Traction Control System
    • Auto lubrication system
    • Aux “buddy” dumping quick connect
    • Aux steering quick connect (towing)
    • Driveline guard
    • Fast fill fuel system
    • Fuel filter with water separator
    • Ground level VIMS data port
    • Ground level battery lockout
    • Ground level transmission lockout
    • Ground level engine start lockout
    • Ground level engine shut-down
    • High-speed crankcase oil change
    • Reservoirs (3 separate):
      – Brake/Hoist, Steering/Fan, Transmission/Converter
    • Rock ejectors
    • Supplemental steering (automatic)
    • Tie-down eyes
    • Center hitch and tow points (front), tow pin (rear)
    • Vandalism protection locks
    • Vital Information Management System (VIMS):
      – Includes VIMS Payload Monitor with max payload and speed manager
    • Hydraulic filters, 1,000 hour
    • SOS℠ sample ports
    • Service points, ground level
    • Sight level gauges for hydraulic/engine oil
  • Antifreeze
    • Extended Life Coolant to –35° C (–30° F)

Optional Equipment:

  • Optional Equipment
    • Cat Detect System
    • Cabin air precleaner
    • Throttle lock
    • Engine delay shutdown timer
    • Antifreeze/coolant protects to –50° C (–58° F)
    • Fuel tank (7570 L/2,000 gal)
    • SL-V grease injectors
    • Body heat
    • Rear axle lubrication cooler
    • External digital payload display
    • Oil renewal system
    • Oil renewal system with 3 day tank
    • Engine coolant and oil heater for cold weather starts
    • Road Analysis Control (RAC)
    • Portable fire extinguisher
    • Torque converter guard
    • Brake wear indicator gauge
    • Rims (wedge)
    • Rim guard