PM822 Cold Planer

Milling Width
88 in
Maximum Milling Depth
13 in
Number of Bits
193
Rotor Speeds
100 / 109 / 118 rpm

Cutting System

Milling Width
88in
Maximum Milling Depth
13in
Number of Bits
193
Rotor Speeds
100 / 109 / 118 rpm

Service Refill Capacities

Fuel Tank
288.1gal
Cooling System
27.5gal
Engine Oil
16.9gal
Hydraulic Tank
29.4gal
Water Spray System Tank
898.2gal (US)
Cooling System
27.5gal (US)
Engine Oil
17.2gal (US)
Fuel Tank
292.7gal (US)
Hydraulic Tank
29.9gal (US)

Dimensions

Operating Width
10.2ft
Transport Height
9.84ft
Transport Length
40.78ft
Transport Width
8.99ft
Operating Length - Conveyor Up
47.64ft
Operating Width
9.27ft
Height - Canopy
13.29ft
Transport Length
40.79ft
Transport Width
8.83ft
Transport Height
9.84ft
Maximum Truck Clearance
15.94ft
Conveyor Swing
60 degrees from center
Minimum Left Cutting Radius
6.56ft
Minimum Right Cutting Radius
5.91ft

Weights

Operating Weight
80910lb
Operating Weight
80887lb
Transport Weight
72312lb

Power Train

Engine
Cat C18 twin-turbo
Rated Power
800.6HP
Global Emissions
Tier 4 Final / Stage IV
Maximum Milling Speed
328ft/min
Maximum Travel Speed
3.7mile/h

Standard Equipment:

  • Operator Environment
    • Ground control keypads
    • Single high-resolution LCD touchscreen display
    • 12-volt power receptacle
  • Cat Connect Technology
    • Cat Product Link
    • Cat GRADE
  • Conveyor
    • Grease tensioner
    • Material removal boost feature
  • Rotor System
    • Automatic plunge-cut
    • Automatic transition feature
    • Obstacle jump
    • Three cutting speeds
  • Powertrain
    • Auto engine idle control
    • High capacity cooling system
    • Dual propel pumps
    • Automatic load control
  • Hydraulic System
    • Dual pump hydraulic propel system
    • Traction control
  • Service And Maintenance
    • Sampling ports for Scheduled Oil Sampling (S·O·S℠)
    • Power hood
    • Platform-level engine oil dipsticks
    • Rotor chamber water spray system
    • Air compressor
    • Accessory drive system
    • 3400 L (898 gal) onboard water tank
    • Side water fill valve
  • Safety And Security
    • Platform handrails
    • Signaling/warning horn
    • Wide-dispersion LED work lights

Optional Equipment:

  • Operator Environment
    • Dual high-resolution LCD touchscreen displays
    • Hydraulically folding canopy with LEDs
    • Air-ride suspension seats
    • Windscreens
  • Cat Connect Technology
    • Inboard ski
    • Sonic sensor (averaging or string line)
    • Ground level grade controls and displays
  • Conveyor
    • Dust abatement system
    • Remote camera (loading conveyor)
  • Rotor System
    • System K Rotor - Course (25 mm)
    • System K Rotor - Course (18 mm)
    • System K Rotor - Standard (15 mm)
    • System K Rotor - Fine (8 mm)
    • System K Rotor - Micro (6 mm)
    • System H Rotor - Micro (6x2 mm)
    • Diamond bits
    • Bit bucket trays
    • Pneumatic bit removal tool
    • Tool holder extractor
    • Rotor turning device with pendant control
  • Powertrain
    • CE certificate
  • Hydraulic System
    • Water tank transfer pump
    • Fuel transfer pump
  • Service And Maintenance
    • High pressure washdown
    • Low pressure washdown
    • Additional spray bars
  • Safety And Security
    • Perimeter LED strip lights
    • Magnetic LED work light
    • Warning beacon (fixed or magnetic mount)
    • Truck signal lights
    • Remote camera (rear, front, magnetic mount)