986K Large Wheel Loader – Block Handler
|
|
|
|
|
|
|
|
-
Engine
-
- Net Power
- 373HP
- Engine Model
- Cat® C15 ™
- Emissions
- U.S. EPA Tier 4 Final/EU Stage V, or China Nonroad Stage III and Brazil MAR-1 and equivalent to U.S. Tier 3 and EU Stage IIIA
- Gross Power - ISO 14396
- 449HP
- Peak Power Speed - 1,600 rpm - SAE J1995
- 456HP
- Peak Power Speed - 1,600 rpm - SAE J1995 (DIN)
- 462HP
- Peak Power Speed - 1,600 rpm - ISO 14396
- 449HP
- Peak Power Speed - 1,600 rpm - ISO 14396 (DIN)
- 455HP
- Rated Speed - 2,000 rpm - EEC 80/1269
- 373HP
- Rated Speed - 2,000 rpm - EEC 80/1269 (DIN)
- 378HP
- Rated Speed - 2,000 rpm - ISO 9249
- 373HP
- Rated Speed - 2,000 rpm - ISO 9249 (DIN)
- 378HP
- Rated Speed - 2,000 rpm - SAE J1349
- 373HP
- Rated Speed - 2,000 rpm - SAE J1349 (DIN)
- 378HP
- Bore
- 5.4in
- Stroke
- 6.75in
- Displacement
- 927in³
- Peak Torque - 1,200 rpm - SAE J1995
- 1778lb/ft
- Torque Rise
- 16%
-
Operating Specifications
-
- Operating Weight
- 116688lb
-
Buckets
-
- Bucket Capacities
- 5.4 m³ (7 yd³)
-
Transmission
-
- Transmission Type
- Cat-Planeten-Lastschaltgetriebe
- Forward - 1
- 5mile/h
- Forward - 2
- 8mile/h
- Direct Drive - Forward 2
- 8mile/h
- Direct Drive - Forward 3
- 14mile/h
- Direct Drive - Forward 4
- 24mile/h
- Reverse - 1
- 5mile/h
- Reverse - 2
- 8mile/h
- Direct Drive - Reverse 2
- 9mile/h
- Direct Drive - Reverse 3
- 16mile/h
- Direct Drive - Reverse 4
- 25.4mile/h
-
Hydraulic System - Lift/Tilt
-
- Lift/Tilt System - Circuit
- Load Sense
- Lift/Tilt System - Pump
- 2 × 110 cc variable displacement
- Maximum Flow at 2,165 rpm
- 123gal/min
- Relief Valve Setting - Lift/Tilt
- 4050psi
- Lift Cylinder - Bore
- 7.5in
- Lift Cylinder - Stroke
- 45in
- Tilt Cylinder - Bore
- 6.7in
- Tilt Cylinder - Stroke
- 22.4in
-
Hydraulic Cycle Times
-
- Rack Back
- 4.5s
- Raise
- 8.5s
- Dump
- 3s
- Lower
- 4.9s
- Lower Float Down
- 4.3s
- Total Hydraulic Cycle Time
- 15.8s
-
Service Refill Capacities
-
- Fuel Tank
- 116gal (US)
- Cooling Systems
- 26gal (US)
- Crankcase
- 9gal (US)
- Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage IV Only)
- 6gal (US)
- Transmission
- 20gal (US)
- Axle Oil - Differentials and Final Drives - Front
- 49gal (US)
- Axle Oil - Differentials and Final Drives - Rear
- 45gal (US)
- Hydraulic System Factory Fill
- 87gal (US)
- Hydraulic System - Tank Only
- 34gal (US)
-
Air Conditioning System
-
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
-
Axles
-
- Front
- Fixed
- Rear
- Trunnion
- Oscillation Angle
- ±12.5°
- Oscillation Angle - Chain Arrangement
- ±8.5°
-
Brakes
-
- Brakes
- ISO 3450: 2011
-
Hydraulic System - Steering
-
- ISO 5010:2007 - Steering System - Circuit
- Load Sense
- ISO 5010:2007 - Steering System - Pump
- Piston, variable displacement
- ISO 5010:2007 - Maximum Flow at 1,400 rpm
- 52gal/min
- ISO 5010:2007 - Steering Cutoff Pressure
- 4000psi
- ISO 5010:2007 - Total Steering Angle
- 70°
-
Operator's Cab
-
- ROPS/FOPS
- ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)
-
Sound Performance - Standard
-
- Operator Sound Level (ISO 6396)
- 72dB(A)
- Machine Sound Level (ISO 6395)
- 112dB(A)
- Note
- The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
- Hearing protection may be neede
-
Sound Performance - Suppression
-
- Operator Sound Level (ISO 6396)
- 72dB(A)
- Machine Sound Level (ISO 6395)
- 110dB(A)
- Note
- The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
- Hearing protection may be neede
-
Dimensions (Approximate) - Quick Coupler and Fork
-
- Front Axle Centerline to Bucket Tip
- 12.6ft
Standard Equipment:
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Electrical
-
- Alarm, back-up
- Alternator, single 145 amp
- Batteries, dry
- Converter, 10/15 amp, 24V to 12V
- Lighting system (halogen, work lights, access and service platform lighting)
- Starting and charging system, 24V
- Starter emergency start receptacle
-
- Operator Environment
-
- Graphical Information Display, displays real time operating information, performs calibrations and customizes operator settings
- Air conditioner
- Rear vision camera system
- Cab, sound suppressed and pressurized, integrated rollover protective structure (ROPS/FOPS) radio ready for entertainment, includes antenna, speakers and converter (12-volt 5-amp) and power port
- Controls, lift and tilt function
- Heater, defroster
- Horn, electric
- Instrumentation, gauges:
– Coolant temperature
– Fuel level
– DEF level
– Hydraulic oil temperature
– Power train oil temperature - Light, cab, dome
- Lunchbox, beverage holders
- Mirrors, rearview (externally mounted)
- Seat, Cat Comfort (cloth), air suspension, six-way adjustable
- Seat belt minder
- Seat belt, retractable, 76 mm (3 in) wide
- STIC Control System
- UV glass
- Transmission gear indicator
- Wet-Arm wipers/washers (front and rear):
– Intermittent front and rear wipers - Lights, directional
-
- Power Train
-
- Cat Production Measurement ready
- Brakes, oil-cooled, multi-disc, service/secondary
- Case drain screens
- Crankcase guard
- Electro hydraulic parking brake
- Engine, C15 MEUI diesel, turbocharged/aftercooled
- Ground level engine shutoff
- Turbine precleaner, engine air intake
- Starting aid, ether, automatic
- Torque converter, Neutralizer
- Transmission, planetary powershift, 4F/3R electronic control
- Manual switch and automatic fuel priming
-
- Other
-
- Automatic bucket lift kickout/positioner
- Hydraulically driven demand fan
- Couplings, Cat O-ring face seals
- Doors, service access (locking)
- Ecology drains for engine, radiator, hydraulic tank
- Fuel tank, 535 L (141 gal)
- Hitch, drawbar with pin
- Hoses, Cat XT™
- Hydraulic, steering and brake filtration/screening system
- Cat Clean Emission Module
- Oil sampling valves
- Premixed 50% concentration of extended life coolant with freeze protection to –34° C (–29° F)
- Rear access to cab and service platform
- Steering, load sensing
- Toe kicks
- Vandalism protection caplocks
Optional Equipment:
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Power Train
-
- –50° C (–58° F) antifreeze
- Engine oil change system, high speed, Wiggins
- Engine block heater 120V or 240V
- High ambient cooling – software
- Cat Production Measurement
-
- Miscellaneous Attachments
-
- Front and rear roading fenders
- Fast fill fuel system (Shaw-Aero)
- Cold Weather Starting (extra two batteries)
- Aggregate Handler
- Wheel chocks
-
- Operator Environment
-
- Cab powered precleaner
- Cat Detect Vision
- AM/FM/CD/MP3 radio
- Satellite Sirius radio with Bluetooth
- LED warning strobe
- CB radio ready
- Window pull down visor
- Handrail mounted mirrors
