973K Track Loader
|
|
|
|
|
|
|
|
-
Engine
-
- Flywheel Power
- 275hp
- Engine Model
- Cat C9.3 ACERT
- Net Power - ISO 9249/SAE J1349 (DIN)
- 278HP
- Net Power – ISO 9249/SAE J1349 (DIN)
- 278hp
- Note
- All nonroad Tier 4 Interim and Final, Stage IIIB and IV and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) with 15 ppm (mg/kg) of sulfur or less, or up to B20 biodiesel blended with ULSD. B20 should meet ASTM D74
- Note
- Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
- Emissions
- Tier 4 Final/Stage IV/Korea Tier 4
- Flywheel Power
- 275HP
- Engine Model
- Cat C9.3
- Net Power - ISO 9249/SAE J1349
- 275HP
- Note (1)
- All nonroad Tier 4 Interim and Final, Stage IIIB, IV and V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) with 15 ppm (mg/kg) of sulfur or less, or up to B20 biodiesel blended with
- Note (2)
- Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
- Emissions
- U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final), Korea Tier 4 Final OR China Nonroad Stage III/UN ECE R96 Stage IIIA emission standards, equivalent to Tier 3/Stage IIIA
-
Weights
-
- Operating Weight
- 63900lb
- Note (1)
- Subtract approximately 295 kg / 650 lb for machines not equipped with Tier 4 Final/Stage V emissions reduction technology.
- Operating Weight
- 63900lb
- Operating Weight - Waste Handler
- 64319lb
- Operating Weight – Wide Gauge
- 71218lb
- Operating Weight - Steel Mill
- 74293lb
- Operating Weight - Wide Gauge
- 71218lb
-
Buckets
-
- Capacity - General Purpose
- 4.2yd3
- Capacity - Performance Series
- 5yd³
- Capacity – Multi-Purpose
- 4.0yd3
- Width - General Purpose
- 117in
- Width - Performance Series
- 117in
- Width - Multi-Purpose
- 116in
- Width – Performance Series
- 117in
- Capacity - General Purpose
- 4.2yd³
- Capacity - Landfill
- 6.4yd³
- Capacity - Multi-Purpose
- 4yd³
- Width – Multi-Purpose
- 116in
- Width - Landfill
- 117in
- Width - Slag
- 112in
- Capacity - Slag
- 4yd³
-
Undercarriage
-
- Track Shoe Width – Standard
- 21.6in
- Track Rollers/Shoes - Each Side
- 7 / 40
- Track Shoe Width – Wide Gauge
- 32.7in
- Track Rollers/Shoes – Each Side
- 7/40
- Track on Ground
- 115.3in
- Ground Contact Area*: Standard Shoe – 550 mm (21.6 in)
- 5673in2
- Ground Contact Area*: Optional Shoe – 675 mm (26.6 in)
- 6960in2
- Ground Contact Area*: Wide Gauge – 830 mm (32.7 in)
- 8572in2
- Ground Pressure* - Standard Shoe - 550 mm (21.6 in)
- 11.3psi
- Ground Pressure* - Optional Shoe - 675 mm (26.6 in)
- 9.3psi
- Track on Ground
- 115.3in
- Ground Contact Area* - Optional Shoe - 675 mm (26.6 in)
- 6960in²
- Ground Contact Area* - Standard Shoe - 550 mm (21.6 in)
- 5673in²
- Ground Contact Area* - Wide Gauge - 830 mm (32.7 in)
- 8572in²
- Track Shoe Width - Optional
- 26.6in
- Track Shoe Width - Standard
- 21.6in
- Ground Pressure* - Wide Gauge - 830 mm (32.7 in)
- 8.3psi
- Track Shoe Width - Wide Gauge
- 32.7in
- Grouser Height – Double Grouser
- 1.92in
- Track Gauge
- 85in
- Note
- *ISO 16754:2008.
- Track Gauge
- 85in
- Grouser Height - Double Grouser
- 1.92in
- Note
- *ISO 16754:2008.
-
Service Refill Capacities
-
- Fuel Tank
- 101.5gal
- DEF Tank
- 9.2gal
- Fuel Tank
- 101.5gal (US)
- DEF Tank
- 9.2gal (US)
-
Dimensions
-
- Overall Machine Width without Bucket: With Standard Tracks - 550 mm (21.6 in) Shoes
- 106.7in
- Ground Clearance
- 18.5in
- Machine Height - Top of Cab
- 138.2in
- Overall Machine Length*
- 298.4in
- Overall Machine Length*
- 298.4in
- Carry Position Approach Angle
- 15°
- Digging Depth*
- 6.2in
- Maximum Rollback - Ground/Carry Position
- 43°/47°
- Reach at Full Lift Height and 45° Dump*
- 53.8in
- Bucket Height - Carry Position
- 19in
- Reach at Full Lift Height and 45° Dump*
- 53.8in
- Clearance at Full Lift Height and 45° Dump*
- 116.2in
- Maximum Rollback/Dump - Fully Raised
- 59°/49°
- Overall Machine Height, Bucket Fully Raised
- 226.5in
- Grading Angle
- 85°
- Ramp Angle
- 29°
- Note
- *With General Purpose bucket and heavy duty teeth.
- Ground Clearance
- 18.5in
- Height - Bucket Hinge Pin
- 166.1in
- Height - Top of Stack
- 120.8in
- Note
- *With General Purpose bucket and heavy duty teeth.
- Overall Machine Height - Bucket Fully Raised
- 226.5in
- Ramp Angle
- 29°
-
Air Conditioning System
-
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.1 kg of refrigerant which has a CO2 equivalent of 1.573 metric tonnes.
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.89 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.
Standard Equipment:
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Power Train
-
- Cat C9.3 diesel engine, turbocharged with ATAAC
- Modular cooling system for engine air intake, oil and water
- Radiator fan, electronically controlled, hydraulically driven, temperature sensing, on demand
- Electro Hydrostatic Control (EHC) for transmission with travel and work modes
- Fuel cooler
- Water separator
- Air cleaner dry-type, axial seal with integral precleaner and dust ejection system, electronic filter condition indicator
- Caterpillar extended life coolant
-
- Undercarriage
-
- Heavy Duty tracks
- Track guiding guards, end section
- Hydraulic track adjuster
- Sprocket rims, with replaceable bolt-on tough steel segments
- Sprocket guards
- Seven track rollers, two upper carrier rollers per track, lifetime lubricated
- Conventional idlers, lifetime lubricated
- Oscillating track roller frames
- Track master link
-
- Electrical
-
- 24 volt heavy duty brushless alternator
- Backup alarm
- Electric horn
- Two heavy duty batteries, high output, maintenance free, 1,400 CCA
- Main disconnect switch
- Electric starter (heavy duty, 24 volt)
-
- Operator Environment
-
- Pressurized, sound suppressed, ROPS/ FOPS cab with sealed front windshield, tinted glass and right side sliding window
- Air conditioning and heating
- Heater/defroster with automatic temperature control
- Electro Hydraulic, seat mounted control levers
- Rear vision camera
- Seat belt, retractable, with buckling indicator on dash
- Electronic Monitoring System with gauges for engine coolant temperature, hydraulic oil temperature, fuel level and Diesel Exhaust Fluid level (when equipped)
- Mirror, rearview, inside adjustable
- Radio ready (Includes 24 to 12 volt converter, speakers, antenna and two 12V power outlets)
- Coat hook
- Storage compartments under left armrest
- Document holder on right console
- Floor mat, rubber, heavy duty
- Windshield washers and wipers, multiple speed front and rear
- Durable metal roof
- Parking brake switch and "brake-on" indicator light
-
- Other Standard Equipment
-
- Sound suppression, exterior
- Z-bar loader linkage
- Load sensing variable displacement implement pump
- Implement cylinders with position sensors
- Operator programmable lift and tilt kickouts
- Engine enclosure with lockable doors
- Radiator core 6.5 fins-per-inch, debris resistant
- Hinged radiator guard and swing out fan
- Full bottom guards
- Lift cylinder guards
- Oil gauge guard
- Product Link ready
- Oil sampling valves
- Cat XT hoses
- HYDO Advanced 10
Optional Equipment:
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Power Train
-
- Cat C9.3 diesel engine with engine mounted aftertreatment to meet U.S. EPA Tier 4 Final/ EU Stage V/Japan 2014 (Tier 4 Final)/ Korea Tier 4 Final emission standards
- Cat C9.3 diesel engine to meet China Nonroad Stage III and UN ECE R96 Stage IIIA emission standards, equivalent to Tier 3/Stage IIIA
- Engine thermal shield
- Fan, basic
- Fan, reversing
- Fan, reversing, low speed
- Fan, reversing, Steel Mill
- Air inlet, precleaner turbine
-
- Operator Environment
-
- Deluxe cab
- Steel Mill cab
- Seat, cloth, air suspension, no side-to-side isolator
- Seat, cloth, air suspension, heated, side-to-side isolator
- Transmission control, V-lever or joystick
- Radio, AM/FM/AUX/USB/Bluetooth
- Cab air precleaner
-
- Hydraulics
-
- Hydraulic oil, biodegradable
- Hydraulic oil, EcoSafe (Steel Mill Arrangement)
- General Purpose Hydraulics Packages: Two-valve, joystick; Three-valve, joystick; Two-valve, two levers; or Three-valve, two levers
- Multi-Purpose Hydraulics Packages: Three-valve, joystick; or Four-valve, joystick
-
- Guards
-
- Tilt cylinder guards
- Guard, front lights
- Windshield protection
- Final drive abrasion guard
- Final drive abrasion guard, lower
-
- Electrical
-
- Rotating beacon
-
- Undercarriage
-
- Track roller guard
- Track roller guard, Steel Mill
- HEAVY DUTY TRACK SEALED AND LUBRICATED TRACK GROUPS (40 SECTIONS)
- 500 mm (19.7 in) double grouser, center hole
- 510 mm (20.1 in) extreme service, single grouser, center hole
- 550 mm (21.6 in) double grouser
- 675 mm (26.6 in) double grouser
- 675 mm (26.6 in) double grouser, center hole
- 675 mm (26.6 in) single grouser, center hole
- 830 mm (32.7 in) double grouser, wide gauge
- HEAVY DUTY SEALED AND NON-LUBRICATED TRACK GROUPS - STEEL MILL
- 500 mm (19.7 in) double grouser
- 500 mm (19.7 in) flat
- 500 mm (19.7 in) triple grouser
- 500 mm (19.7 in) alternate flat shoe
-
- Buckets
-
- GENERAL PURPOSE BUCKETS
- 3.0 m3 (4.0 yd3), welded flush adaptors
- 3.2 m3 (4.2 yd3), pin on
- 3.2 m3 (4.2 yd3), heavy duty, pin on
- 3.2 m3 (4.2 yd3), heavy duty, full edge, pin on
- 4.2 m3 (5.5 yd3), Performance Series
- 4.0 m3 (5.2 yd3), Performance Series flush
- MULTI-PURPOSE BUCKETS
- 3.0 m3 (4.0 yd3), heavy duty, pin on
- 3.0 m3 (4.0 yd3), pin on
- WIDE BUCKETS
- 4.2 m3 (5.5 yd3), Performance Series
- LANDFILL BUCKETS
- 4.6 m3 (6.0 yd3), multi-purpose landfill, heavy duty, pin on
- 4.9 m3 (6.4 yd3), general purpose landfill, heavy duty, pin on
- STEEL MILL BUCKET
- 3.0 m3 (4.0 yd3), slag bucket
-
- Other Attachments
-
- Counterweight
- Counterweight, heavy duty bumper
- Multi-shank ripper
- Ripper hitch
- Rear striker bars
- Standard bumper
- No bumper
- Standard rear step
- Ripper rear step
- ADDITIONAL WORK TOOLS (please consult your Cat dealer for ordering information)
- Quick coupler
- Blades
- Forks
- Material handling arms
- Rakes
-
- Starters, Batteries And Alternators
-
- Engine coolant heater, 120V
- Engine coolant heater, 240V
-
- Maintenance And Related Attachments
-
- Maintenance package, deluxe
- High speed oil change
- Sediment pump
- Fuel tank refueling pump
- Service package, standard
- Locking bar that holds cab at 30 degrees safely, front windshield
- Extended service package with manual hydraulic system enabling cab tilt/lock and shovel holder (shovel not included)
- Antifreeze -50 C (-58 F)
-
- Technology Products
-
- Product Link - Satellite
- Product Link - Cellular
- Grade control mast
-
- Special Arrangements
-
- Waste Package, Heavy Duty
- Waste Package, Heavy Duty, Enhanced Cleaning
- Waste Package, Extreme Service
- Ship Hold Package, Heavy Duty
- Steel Mill Package, Heavy Duty
- Low Ground Pressure Package - Heavy Duty
