Standard Equipment:

• Air Inlet System

  • Air Cleaner; single element canister type

• Control Panels

  • Auto / start / stop control
  • Engine cool-down timer
  • Environmental sealed front face
  • Emergency stop pushbutton
  • Text alarm / event descriptions
  • 24 Volt DC operation
  • Controls:
  • Generator mounted - Rear facing
  • IVR includes reactive droop capability, 3-phase voltage sensing, KVAR / PF modes, RFI suppression, min / max exciter.
  • Limiter and exciter diode monitor
  • Generator set packages include Caterpillar' s Voltage Regulator.
  • EMCP 4.2B
  • Speed adjust
  • Alarm acknowledge
  • Engine cycle crank
  • Load histogram feature
  • Lamp test
  • Digital indication for:
  • Customizable screens -0 True RMS AC metering, 3-phase, +/-2% accuracy
  • RPM
  • PLC functionality
  • Operating hours
  • Oil pressure (psi, kPa or bar)
  • Coolant temperature
  • DC volts
  • Power Factor (per phase & average)
  • Volts (L-L & L-N)
  • kW (per phase, average & percent)
  • Amps (per phase & average)
  • Frequency (Hz)
  • kVA (per phase, average & percent)
  • kVAr (per phase, average & percent
  • Low oil pressure - High coolant temperature
  • kVAr-hr (total)
  • High coolant temperature
  • Warning/shutdown with common LED indication of shutdowns for:
  • kW-hr (total)
  • Overspeed
  • Low coolant temperature
  • Failure to start (overcrank)
  • Emergency stop
  • Over/Under voltage (27 / 59)
  • Generator phase sequence
  • Low coolant level
  • Programmable protective relaying functions:
  • 6 Customer programmable digital inputs
  • Over/Under Frequency (81 o/u)
  • Reverse Reactive Power (kVAr) (32RV)
  • Serial annunciator module data link
  • Reverse Power (kW) (32)
  • Number of I/O varies on options selected:
  • Overcurrent (50 / 51)
  • Cat Connect
  • 4 Programmable relay outputs (Form A)
  • Communications:
  • Customer data link (Modbus RTU)
  • 1 Programmable digital outputs
  • 1 Programmable relay outputs (Form C)
  • Accessory module data link
  • 3 Analog inputs

• Cooling System

  • Certified standard PGS provided
  • ATAAC - 3516E Package Radiators shipped installed

• Exhaust System

  • Dry exhaust manifold
  • Flanged faced outlet(s)

• Fuel System

  • Fuel cooler; not included with packages without radiator
  • Secondary fuel filters
  • Fuel priming pump
  • Flexible fuel lines - shipped loose

• General

  • Right hand servicing
  • SAE Standard rotation
  • Flywheel and flywheel housing - SAE No. 00
  • Caterpillar yellow with high gloss black rails and radiator

• Generator And Attachments

  • Busbar connections, right side extension box, bottom cable entry
  • High Voltage:
  • NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby)
  • Form wound
  • Internal excitation
  • NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby)
  • 3 Phase brushless, salient pole
  • Medium Voltage:
  • NEMA standard hole pattern
  • Permanent magnet
  • Permanent magnet
  • Winding temperature detectors
  • Class H insulation, Class F temperature rise at 40C ambient (105C prime / 130C standby)
  • Winding temperature detectors
  • Low voltage:
  • Form wound
  • 6 Leads
     
  • Random wound
  • Anti Condensation Space Heater
  • Winding temperature detectors
  • Busbar connections, top center mounted, top cable entry
  • NEMA standard hole pattern

• Governing System

  • ADEM A3

• Literature

  • English

• Lubrication System

  • Integral lube oil cool
  • Lubricating oil
  • Oil filter, filler and dipstick
  • Gear type lube oil pump
  • Oil drain lines and valve
  • Fumes disposal

• Mounting System

  • Rails - engine / generator / radiator mounting
  • Rubber anti-vibration mounts (shipped loose)
  • Anti-vibration mounts (shipped loose)

• Starting System

  • 24 Volt electric starting motor
  • 45 Amp charging alternator
  • Battery disconnect switch
  • Battery and battery rack w/cables

Optional Equipment:

• Control System

  • EMCP 4.3, EMCP 4.4
  • Controller: [ ] EMCP 4.2 [ ] EMCP 4.3 [ ] EMCP 4.4
  • Local annunciator module: [ ] NFPA 110 [ ] Custom

• Air Inlet System

  • Dual element air cleaner
  • Single element filter

• Engine Options

  • Air Cleaner: [ ] Single element air cleaners [ ] Dual element air cleaners [ ] Heavy duty air cleaners
  • Battery Charger: [ ] 10A [ ] 20A [ ] 35A
  • Starting Aids: [ ] 220V 50 Hz Jacket Water Heater
  • Muffler: [ ] Industrial Grade
  • Starting Motors: [ ] Standard [ ] Heavy Duty
  • Batteries: [ ] Standard (1400 CCA) [ ] Heavy Duty (2800 CCA)

• Cooling System

  • Standard ambient radiators
  • Coolant
  • Optional installed radiators
  • Optional installed ATAAC radiators
  • Water level switch gauges
  • Standard ambient ATAAC radiators

• Crankcase System

  • Ventilation system
  • No explosion relief valves
  • Explosion relief valves

• Exhaust System

  • Y-Adapters
  • Flanges
  • Tier 4 clean emission MOD Kits
  • Clean emission parts
  • Flange and exhaust expanders
  • Flexible fittings
  • Exhaust offset
  • Mufflers
  • Tier 4 dosing cabinet
  • Tier 4 clean emissions module
  • Elbows

• Alternators

  • Temperature Rise (over 40°C ambient): [ ] 150°C [ ] 125°C [ ] 105°C [ ] 80°C

• Power Termination

  • Power Termination: [ ] Bus Bar [ ] Circuit Breaker
  • Circuit breaker trip unit: [ ] LSI [ ] LSIG [ ] LSIG-P
  • Circuit Breaker rating: [ ] 2000A [ ] 2500A [ ] 3200A [ ] 4000A

• Fuel System

  • Fuel Priming Pumps (Tier 4) - Manual or electric
  • Primary Fuel Filter

• Extended Service Contract (esc)

  • Extended Service Contract (ESC): [ ] 2 Year [ ] 3 Year [ ] 5 Year

• General

  • Special paint (Colors other than Caterpillar yellow or high performance paints)
  • US aid emblem

• Generators And Attachments

  • Generator conversion
  • Space heater
  • Alternator air cleaner
  • Low / Medium voltage: 380/400/415 volts, 3 phase 1500 rpm. RW, IE, No. of Leads = 6, Pitch = .6667: 1600 Frame
  • Differential current transformers (DCT)
  • Differntial current transformers (DCT) 8.7 kV and 15 kV classes
  • Thermostate for space heater
  • Low / Medium voltage: 380/400/415 volts, 3 phase 1500 rpm. RW, PM, No. of Leads = 6, Pitch = .6667: 1600 and 1800 Frames

• Instrumentation

  • Pyrometer and thermocouples

• Lubrication System

  • Oil level regulator
  • Prelube pumps
  • Lube oil in standard sump

• Mounting System

  • Puck style low efficiency isolators
  • IBC vibration isolators
  • Spring type vibration isolators

• Power Connections

  • Neutral ground connections
  • Center post busbar
  • Right side power connections
  • Left side power connections
  • 2700 Frame, four lead, four terminal
  • Ground cables between generator and terminal box
  • Low voltage circuit breakers
  • Rear power connections

• Special Tests / Reports

  • Torsional vibration analysis reports
  • Generator set fuel consumption test
  • PGS test report @ 1.0 power factor
  • Fuel consumption test
  • Standard engine test charge
  • IBC certification
  • OSHPD certification
  • Canadian Standards Association certification
  • PGS test report @ 0.8 power factor
  • generator test report

• Starting And Charging

  • 10, 20, 35 and 50 amp battery chargers
  • Air starting motors
  • Air pressure regulator
  • Electric starting motors
  • Starter cover
  • Jacket water heaters
  • Engine barring device
  • 24 Volt battery set - Dry

• Extended Service Coverage

  • Platinum, Gold and Silver coverage