C15 Generator Set

Bore
5.4 in
Displacement
927.56 in³
Stroke
6.75 in
Aspiration
Air to Air Aftercooled

Engine Specifications

Bore
5.4in
Displacement
927.56in³
Stroke
6.75in
Aspiration
Air to Air Aftercooled
Fuel System
MEUI
Aspiration
Air to Air Aftercooled
Fuel System
MEUI
Bore
5.4in
Displacement
927.56in³
Stroke
6.75in
Engine Model
C15 ATAAC, I-6, 4-Stroke Water-Cooled Diesel
Compression Ratio
16.1:1
Governor Type
Adem™A4

Generator Set Specifications

Duty Cycle
Standby, Prime
Minimum Rating
320 ekW
Maximum Rating
500 ekW
Voltage
208 to 600 Volts
Frequency
60 Hz
Speed
1800 rpm
Emissions/Fuel Strategy
Low Fuel, Tier 2, Tier 3, EU Stage IIIA

Generator Set Dimensions

Height - Maximum
82.4in
Length - Maximum
168.2in
Width - Maximum
81in

Standard Equipment:

  • Air System
    • Turbocharger
    • Air Cleaner - Non Canister disposable paper filter
    • Aftercooler core
  • Air Inlet
    • Air Cleaner
  • Control Panel
    • GCCP 1.3
    • GCCP Genset Controller
  • Cooling
    • Package mounted radiator
  • Cooling System
    • Coolant drain line with valve
    • Fan drive, battery charging alternator drive
    • Caterpillar Extended Life Coolant
    • Radiator and cooling fan with guard
  • Exhaust
    • Base, formed steel with single wall integral 8-hour fuel tank
    • Standard open set fuel tank / base supplied
    • Exhaust flange outlet
  • Fuel
    • Primary fuel filter with integral water separator
    • Secondary fuel filter
    • Fuel priming pump
  • Fuel System
    • Engine fuel transfer pump
    • Flexible fuel lines
    • Fuel cooler
    • Fuel priming pump
    • Primary fuel filter w/integral water separator & secondary filter
  • Generator
    • IP23 Protection
    • Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
    • Matched to the performance and output characteristics of Cat engines
  • Power Termination
    • Bus Bar
  • Mounting
    • Rubber vibration isolators
  • Generator And Attachments
    • Segregated low voltage (AC/DC) wiring panel
    • Optional LC frame generator - IP23 Protection
    • Power center, IP22
    • Mandatory Option circuit breaker, IEC, 3 pole, mounted in power centre
    • Integrated Voltage Regulator
    • A frame generator - IP21 Protection
  • Governing System
    • Cat Electronic Governor (ADEM A4).
  • Lube System
    • Oil drain valves
    • Oil cooler
  • Mounting System
    • Captive linear vibration isolators between base and engine-generator includes lifting provisions and termination points for coolant and lube oil drain lines
  • Starting/charging
    • 24 Volt battery with rack and cables
    • 24 volt starting motor
    • Batteries
  • General
    • Engine and alternator pre paint, Caterpillar yellow
    • Paint - Caterpillar Yellow except rails and radiators gloss black

Optional Equipment:

  • Air Inlet System
    • Single element air cleaner
    • Dual element air cleaner
  • Exhaust
    • Industrial, Residential, Critical Mufflers
  • Certifications
    • Global certification for CIS
    • EU certificate of conformance
  • Generator
    • Anti-condensation heater
    • Excitation: [ ] Permanent Magnet Excited (PM) [ ] Internally Excited (IE)
    • Oversize and premium generators
  • Circuit Breakers
    • 4 Pole (IEC-100% rated) circuit breakers - Package mounted
    • Power terminal strip
    • 4 Pole (IEC-100% rated) circuit breakers - Motorised
    • Shunt trip for IEC circuit breaker
    • Pad-lockable circuit breaker device
    • Auxiliary contacts, circuit breaker
    • 3 Pole (IEC-100% rated) circuit breakers - Motorised
    • 3 Pole (IEC-100% rated) circuit breakers - Package mounted
  • Power Termination
    • Circuit breakers, IEC compliant
    • Circuit breakers, UL listed
  • Control Panels
    • Remote annunciator
    • Local alarm horn
    • Local annunciator
    • Oil temperature displays
    • GCCP 1.4
    • Volt free contacts
    • Protective devices: Earth fault relay ; Earth leakage ground fault relay ; Overload shutdown via breaker ; Low fuel level alarm ; Low fuel level shutdown ; High fuel level alarm ; Fuel level sensor
  • Starting/charging
    • Charging alternator
    • Battery chargers
    • Oversize batteries
    • Heavy-duty starting system
    • Jacket water heater
  • Cooling System
    • Low coolant temperature alarm
    • Stone guards
    • Radiator duct flange
  • Enclosures
    • Sound attenuated enclosures
    • High ambient sound attenuated enclosures
  • Exhaust System
    • Engine mounted muffler
    • 6 and 8 inch elbow kit
    • Manifold and turbocharger guard
    • End in / End out mufflers - 10, 25 and 35 dBA attenuation
    • 6 and 8 inch flange GP
    • Flexible exhaust fittings
  • Fuel System
    • Fuel transfer system controls
    • Manual fuel transfer pump
    • Dual wall fuel tank base
  • General
    • Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
    • Sound attenuated, weather protective or high ambient weather protective enclosure
    • EU Certificate of Conformance (CE)
    • Single or dual wall integral fuel tanks
    • CSA Certification
    • EEC Declaration of Conformity
    • Narrow, Wide or Skid Base
    • Integral & sub-base UL listed dual wall fuel tanks
    • Automatic transfer switches (ATS)
    • UL 2200 package
    • The following options are based on regional and product configuration:
    • Single or dual wall sub-base fuel tanks
  • Generator And Attachments
    • Oversize LC frame generator
    • Oversize A frame generator
    • CIP a frame generator
    • LC frame generator
    • LC frame CIP generator
    • Ingress protection
    • Permanent magnet generator
    • Space heaters
  • Lube System
    • Manual sump pump
  • Mounting System
    • Narrow skid base - replaces standard fuel tank base
  • Special Test / Reports
    • PGS Test report @ 1.0 power factor
    • PGS Test report @ 0.8 power factor
  • Starting / Charging System
    • 5 Amp single battery charger
    • Battery disconnect switch
    • Jacket water heater