C18 Generator Set

C18 Generator Set

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

  • Maximum Rating 715 kVA

  • Minimum Rating 550 kVA

  • Emissions/Fuel Strategy Low Fuel, EU Stage IIIA

  • Voltage 380 to 415 Volts

Request a quote

Product Specifications

Specifications

Generator Set Specifications

  • Duty Cycle Standby, Prime

  • Emissions/Fuel Strategy Low Fuel, EU Stage IIIA

  • Frequency 50 Hz

  • Maximum Rating 715 kVA

  • Minimum Rating 550 kVA

  • Speed 1500 rpm

  • Voltage 380 to 415 Volts

Engine Specifications

  • Aspiration Air to Air Aftercooled

  • Bore 5.71in

  • Compression Ratio 14.5:1

  • Displacement 1106.4in³

  • Engine Model C18 ATAAC, I-6, 4-Stroke Water-Cooled Diesel

  • Fuel System Electronic unit injection

  • Governor Type Adem™A4

  • Stroke 7.2in

Generator Set Dimensions

  • Height - Maximum 107.8in

  • Length - Maximum 218.5in

  • Length - Minimum 218.5in

  • Width - Maximum 80.9in

Features

Equipment

Standard Equipment

  • Air cleaner, light duty

  • Turborcharger

  • Air cleaner

  • GCCP 1.3

  • GCCP Genset Controller

  • Package mounted radiator

  • Coolant drain line with valve

  • Fan drive, battery charging alternator drive

  • Radiator and cooling fan with guard

  • Caterpillar extended life coolant

  • Exhaust flange outlet

  • Stainless steel exhaust flex, gaskets, raincap and SAE exhaust flange for customer use - shipped loose

  • Standard open set fuel tank/base supplied Base, formed steel with single wall integral 8-hour fuel tank

  • Fuel priming pump

  • Secondary fuel filters

  • Primary fuel filter with integral water separator

  • Matched to the performance and output characteristics of Cat engines

  • IP23 Protection

  • Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time

  • Segregated low voltage (AC/DC) wiring panel

  • Power center, IP22

  • Optional LC Frame generator - IP23 Protection,

  • Mandatory option rear circuit breaker, IEC, 3 pole, mounted in power center

  • Integrated voltage regulator (IVR)

  • A Frame generator - IP21 Protection

  • Cat electronic governor (ADEM A4)

  • Busbar

  • Oil drain valves

  • Lubricating oil

  • Captive linear vibration isolators between base and engine-generator includes lifting provisions and termination points for coolant and lube oil drain lines

  • 24 Volt battery with rack and cables

  • 24 volt starting motor

  • Batteries

  • Rubber vibration isolators

  • Engine and alternator pre-paint, Caterpillar yellow

  • Paint - Caterpillar yellow except rails and radiators gloss black

Optional Equipment

  • Global

  • European Certifications - EU Certificate of Conformance (CE)

  • Industrial, residential, critical mufflers

  • Dual element air cleaner

  • Single element air cleaner

  • Oversize and premium generators

  • Excitation: [ ] Permanent magnet excitation (PMG) Excited (PM) [ ] Internally Excited (IE)

  • Anti-condensation heater

  • Circuit breakers, IEC compliant

  • Circuit breakers, UL listed

  • 4 Pole (IEC-100% rated) - package mounted

  • 3 Pole (IEC-100% rated) - package mounted

  • Padlockable device

  • 4 Pole (IEC-100% rated) - motorized

  • Power terminal strip

  • 3 Pole (IEC-100% rated) - motorized

  • GCCP 1.4

  • Local & remote annunciator modules

  • Digital I/O module

  • Load share module

  • EMCP (4.2) (4.3) (4.4)

  • Remote monitoring software

  • Local alarm modules

  • Control panel protective devices

  • Remote annunciator module

  • Volt free contacts

  • Radiator duct flange

  • Sound attenuated enclosures

  • Heavy duty starting system

  • Battery chargers

  • Charging alternator

  • Oversize batteries

  • Jacket water heater

  • Elbow Kit

  • Mufflers - End in/end out

  • Manifold and turbocharger guards

  • Engine mounted muffler

  • Flange groups; 8 and 10 inch weld flanges and gaskets

  • Integral dual wall fuel tank base

  • Manual fuel transfer system

  • Fuel transfer system

  • Integral & sub-base UL listed dual wall fuel tanks

  • UL 2200 package

  • Narrow, wide or skid base

  • Enclosures: Sound attenuated, weather protective

  • Sound attenuated, weather protective or high ambient weather protective enclosure

  • EEC Declaration of Conformity

  • Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007

  • The following options are based on regional and product configuration:

  • Single or dual wall sub-base fuel tanks

  • Automatic transfer switches (ATS)

  • CSA Certification

  • EU Certificate of Conformance (CE)

  • Single or dual wall integral fuel tanks

  • A Frame CIP generator

  • LC frame generator

  • Permanent magnet excitation (PMG)

  • LC frame oversize generator

  • Space heaters

  • Ingress protection

  • LC frame CIP generator

  • A Frame oversize generator

  • Manual sump pump

  • Narrow skid base

  • 5 Amp Battery charger

  • Jacket water heater

  • Battery disconnect switch