3516C Generator Set

3516C Generator Set

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

Stroke
8.46 in
Minimum Rating
2500 kVA
Maximum Rating
2750 kVA
Voltage
380 to 11000 volts

Engine Specifications

Stroke
8.46in
Engine Model
3516C, ATAAC, V-16,4-Stroke Water-Cooled Diesel
Displacement
4764.73in
Fuel System
Electronic unit injection
Aspiration
TA
Governor Type
Adem™3
Compression Ratio
14.7:1
Bore
6.69in
Stroke - HD
Stroke - Standard
7.48in

Generator Set Specifications

Minimum Rating
2500 kVA
Maximum Rating
2750 kVA
Voltage
380 to 11000 volts
Frequency
50 Hz
Speed
1500 rpm
Duty Cycle
Standby, Mission Critical, Prime
Emissions/Fuel Strategy
Low Fuel, Low Emissions

Generator Set Dimensions

Length - Maximum
297.4in
Width - Maximum
108.9in
Height - Maximum
118.3in
Dry Weight - Genset (maximum)
39090lb

Standard Equipment:

  • Air Inlet
    • Air cleaner
  • Cooling
    • Package mounted radiator
  • Exhaust
    • Exhaust flange outlet
  • Fuel
    • Secondary fuel filter
    • Primary fuel filter with integral water separator
    • Fuel priming pump
  • Generator
    • Matched to the performance and output characteristics of Cat engines
    • IP23 Protection
  • Power Termination
    • Bus Bar
  • Control Panel
    • EMCP 4 Genset Controller
  • General
    • Paint - Caterpillar Yellow except rails and radiators gloss black

Optional Equipment:

  • Exhaust
    • Exhaust mufflers
  • Generator
    • Anti-condensation heater
    • Excitation: [ ] Permanent Magnet Excited (PM) [ ] Internally Excited (IE)
    • Oversize and premium generators
  • Power Termination
    • Circuit breakers, UL listed
    • Circuit breakers, IEC compliant
  • Control Panels
    • Digital I/O module
    • Remote monitoring software
    • Load share module
    • Generator temperature monitoring & protection
    • EMCP (4.2) (4.3) (4.4)
  • Mounting
    • Spring-type vibration isolator
    • IBC isolators
    • Rubber anti-vibration mounts
  • Starting/charging
    • Air starting motor with control and silencer
    • Jacket water heater
    • Charging alternator
    • Battery chargers
    • Heavy-duty starting system
    • Oversize batteries
  • General
    • Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
    • The following options are based on regional and product configuration:
    • Integral & sub-base fuel tanks
    • Enclosures: sound attenuated, weather protective
    • UL 2200 package
    • Automatic transfer switches (ATS)
    • EEC Declaration of Conformity
    • Integral & sub-base UL listed dual wall fuel tanks
    • EU Certificate of Conformance (CE)
    • CSA Certification