C1.1 Generator Set

C1.1 Generator Set

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

Bore
3.0 in
Displacement
69.0 in3
Stroke
3.2 in
Fuel System
Indirect Injection

Engine Specifications

Bore
3.0in
Displacement
69.0in3
Stroke
3.2in
Fuel System
Indirect Injection
Fuel System
Indirect Injection
Bore
3in
Displacement
69in³
Stroke
3.2in
Engine Model
C1.1, In-line 4, 4-cycle diesel
Compression Ratio
23.0:1
Governor Type
Mechanical
Aspiration
Naturally Aspirated

Generator Set Specifications

Minimum Rating
8.0 ekW
Maximum Rating
8.8 ekW
Voltage
110 to 480 Volts
Frequency
60 Hz
Speed
1800 rpm
Emissions/Fuel Strategy
R96/EUIIIa Equivalent
Duty Cycle
Standby, Prime

Generator Set Dimensions

Height - Maximum
39.2in
Length - Maximum
55.1in
Width - Maximum
24.4in

Standard Equipment:

  • Air Inlet System
    • Air cleaner; light duty with disposable element
    • Air cleaner; light duty with disposable element
  • Control Panel
    • EMCP 4.1
    • EMCP4.1 control panel
  • Cooling System
    • Fan drive, battery charging alternator drive
    • Radiator and cooling fan with guards
    • Caterpillar extended life coolant
    • Coolant drain line with valve
    • Radiator and cooling fan with guards
  • Exhaust System
    • Stub pipe, gaskets, raincap & SAE exhaust flange for customer use; shipped loose
    • Stub pipe, gaskets, raincap & SAE exhaust flange for customer use; shipped loose
  • Fuel System
    • Base, formed steel with single wall integral 8-hour fuel tank
    • Standard open set fuel tank / base supplied
    • Standard open set fuel tank / base supplied
    • Base, formed steel with single wall integral 8-hour fuel tank
  • Generators And Generator Attachments
    • Segregated low voltage (AC/DC) wiring panel
    • Circuit breaker, IEC, 3 pole, mounted in tower panel
    • 12 Leads
    • Voltage regulator (single phase sensing)
    • Tower panel, IP22, bottom cable entry
    • IP23 Protection
    • Base, formed steel with single wall integral 8-hour fuel tank
    • Tower panel, IP22, bottom cable entry
    • IP23 Protection
    • 12 leads
  • Governing System
    • Mechanical governing system
    • Mechancial governing system
  • Lube System
    • Lubricating oil
    • Oil drain line with valve
    • Lubricating oil
    • Oil drain line with valve
  • Mounting System
    • Captive linear vibration isolators between base and engine-generator
    • Includes lifting provisions and termination points for coolant
    • Captive linear vibration isolators between base and engine-generator
    • includes lifting provisions and termination points for coolant
  • Starting / Charging System
    • 12 Volt battery with rack and cables
    • 12V battery with rack & cables
  • General
    • Engine and alternator pre-paint, Caterpillar yellow

Optional Equipment:

  • Alternator Options
    • Coastal insulation protection
  • Certificates
    • Global certification for CIS
    • European upgrade to STD set for CE certificate
  • Circuit Breakers
    • Pad-lockable breaker device
    • 4 Pole circuit breaker
  • Control Panel
    • Battery charger
    • Volt free contacts for common alarm
    • EMCP 4.2
    • Volt free contacts for genset running
    • Emergency stop with key
  • Cooling System
    • Coolant heater
  • Enclosures
    • Sound attenuated enclosure (GALV)
    • Single point lift for enclosure
  • Fuel System
    • Skidbase for open sets
    • Fuel transfer control
    • DEFRA bunded fuel tank
    • 1000 hr extended service interval
    • Base feet
    • Skidbase for Enclosures
    • Low fuel level alarm
  • Mounting Options
    • Silencer installation kit
    • Industrial silencer removal
    • Battery removal
  • Special Test And Inspection
    • PGS test report @1.0 power factor
  • General
    • Packing case - canopied set
    • Radiator stone guard
    • Packing case - compact set