C15 (50 Hz) China Non Road

C15 (50 Hz) China Non Road

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

Bore
5.4 in
Displacement
927.56 in³
Stroke
6.75 in
Aspiration
Air to Air Aftercooled

Engine Specifications

Bore
5.4in
Displacement
927.56in³
Stroke
6.75in
Aspiration
Air to Air Aftercooled
Fuel System
MEUI
Engine Model
C15 ATAAC, I-6, 4-Stroke Water-Cooled Diesel
Compression Ratio
16.1:1
Governor Type
Adem™A4
Aspiration
Air to Air Aftercooled
Fuel System
MEUI
Bore
5.4in
Displacement
927.56in³
Stroke
6.75in

Generator Set Specifications

Duty Cycle
Standby, Prime
Minimum Rating
365 kVA
Maximum Rating
550 kVA
Voltage
208 to 600 Volts
Frequency
50 Hz
Speed
1500 rpm
Emissions/Fuel Strategy
Low Fuel, Tier 2 or 3

Generator Set Dimensions

Height - Maximum
93.2in
Length - Maximum
222.7in
Width - Maximum
90in

Standard Equipment:

  • Air System
    • Aftercooler core
    • Turbocharger
    • Air Cleaner - Non Canister disposable paper filter
  • Air Inlet
    • Air Cleaner
  • Control Panel
    • EMCP 4.2
    • EMCP 4 Genset Controller
  • Cooling
    • Package mounted radiator
  • Cooling System
    • Radiator and cooling fan with guard
    • Coolant drain line with valve
    • Caterpillar Extended Life Coolant
    • Fan drive, battery charging alternator drive
  • Fuel
    • Secondary fuel filter
    • Fuel priming pump
    • Primary fuel filter with integral water separator
  • Exhaust
    • Stainless steel exhaust flex, gaskets, raincap & SAE exhaust flange for customer use; shipped loose
    • Exhaust flange outlet
  • Fuel System
    • Standard open set fuel tank / base supplied
    • Base, formed steel with single wall integral 8-hour fuel tank
  • Generator
    • IP23 Protection
    • Matched to the performance and output characteristics of Cat engines
    • Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
  • Generator And Attachments
    • IP23 Protection
    • A frame generator - IP21 Protection
    • Segregated low voltage (AC/DC) wiring panel
    • Mandatory Option circuit breaker, IEC, 3 pole, mounted in power
    • Optional LC frame generator - IP23 Protection
    • Power center, IP22
    • Integrated Voltage Regulator
  • Power Termination
    • Bus Bar
  • Governing System
    • Cat Electronic Governor (ADEM A4)
  • Lube System
    • Lubricating oil
    • Oil drain valves
  • Mounting
    • Rubber vibration isolators
  • Mounting System
    • Rubber vibration isolators
  • Starting/charging
    • 24 Volt battery with rack and cables
    • Batteries
    • 24 volt starting motor
  • General
    • Engine and alternator pre paint, Caterpillar yellow
    • Paint - Caterpillar Yellow except rails and radiators gloss black

Optional Equipment:

  • Air Inlet System
    • Single element air cleaner
    • Dual element air cleaner
  • Exhaust
    • Industrial, Residential, Critical Mufflers
  • Certifications
    • EU certificate of conformance
    • Global certification for CIS
  • Generator
    • Oversize and premium generators
    • Anti-condensation heater
    • Excitation: [ ] Permanent Magnet Excited (PM) [ ] Internally Excited (IE)
  • Power Termination
    • Circuit breakers, UL listed
    • Circuit breakers, IEC compliant
  • Circuit Breakers
    • 4 Pole (IEC-100% rated) circuit breakers - Motorised
    • 3 Pole (IEC-100% rated) circuit breakers - Motorised
    • Auxiliary contacts, circuit breaker
    • 4 Pole (IEC-100% rated) circuit breakers - Package mounted
    • Pad-lockable circuit breaker device
    • Power terminal strip
    • Shunt trip for IEC circuit breaker
    • 3 Pole (IEC-100% rated) circuit breakers - Package mounted
  • Control Panels
    • Protective devices: Earth fault relay ; Earth leakage ground fault relay ; Overload shutdown via breaker ; Low fuel level alarm ; Low fuel level shutdown ; High fuel level alarm ; Fuel level sensor
    • Remote annunciator
    • Oil temperature displays
    • EMCP 4.3, EMCP 4.4
    • Local annunciator
    • Local alarm horn
    • Volt free contacts
  • Starting/charging
    • Jacket water heater
    • Heavy-duty starting system
    • Battery chargers
    • Oversize batteries
    • Charging alternator
  • Cooling System
    • Radiator duct flange
    • Stone guards
    • Low coolant temperature alarm
  • Enclosures
    • Sound attenuated enclosures
    • High ambient sound attenuated enclosures
  • Exhaust System
    • End in / End out mufflers - 10, 25 and 35 dBA attenuation
    • Manifold and turbocharger guard
    • Flexible exhaust fittings
    • 6 and 8 inch flange GP
    • 6 and 8 inch elbow kit
    • Engine mounted muffler
  • Fuel System
    • Dual wall fuel tank base
    • Manual fuel transfer pump
    • Fuel transfer system controls
  • General
    • UL 2200 package
    • Automatic transfer switches (ATS)
    • Narrow, Wide or Skid Base
    • Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
    • Single or dual wall sub-base fuel tanks
    • EU Certificate of Conformance (CE)
    • EEC Declaration of Conformity
    • The following options are based on regional and product configuration:
    • Single or dual wall integral fuel tanks
    • CSA Certification
    • Sound attenuated, weather protective or high ambient weather protective enclosure
    • Integral & sub-base UL listed dual wall fuel tanks
  • Generator And Attachments
    • Oversize A frame generator
    • LC frame generator
    • Oversize LC frame generator
    • CIP a frame generator
    • LC frame CIP generator
    • Permanent magnet generator
    • Space heaters
    • Ingress protection
  • Lube System
    • Manual sump pump
  • Mounting System
    • Narrow skid base - replaces standard fuel tank base
  • Special Test / Reports
    • PGS Test report @ 1.0 power factor
    • PGS Test report @ 0.8 power factor
  • Starting / Charging System
    • 5 Amp single battery charger
    • Battery disconnect switch