Cat® 3508 Diesel Engine
|
|
|
|
|
|
|
|
-
Power Rating
-
- Minimum Power
- 680.0bhp
- Maximum Power
- 1000.0bhp
- Rated Speed
- 1200-1800 rpm
- Maximum Torque
- 3144lb-ft @ 1450 rpm
- Maximum Power
- 1000HP
- Rated Speed
- 1200-1800 rpm
- Minimum Power
- 680HP
- Minimum Power
- 680HP
- Maximum Power
- 1000HP
- Rated Speed
- 1200-1800 rpm
-
Emission Standards
-
- Emissions
- Non-certified
- Emissions
- Non-Certified
- Emissions
- Non-Certified
-
General
-
- Engine Configuration
- V-8, 4-Stroke-Cycle Diesel
- Bore
- 170 mm (6.7 in)
- Stroke
- 190 mm (7.5 in)
- Displacement
- 34.53 L (2107 in³)
- Aspiration
- Turbocharged Aftercooled
- Compression Ratio
- 13.0:1
- Rotation (from flywheel end)
- Counterclockwise
- Lube System (refill)
- 424 L (448 qt)
- Engine Configuration
- V-8, 4-Stroke-Cycle Diesel
- Bore
- 6.7in
- Stroke
- 7.5in
- Displacement
- 2107in³
- Compression Ratio
- 13.0:1
- Aspiration
- Turbocharged Aftercooled
- Rotation from Flywheel End
- Counterclockwise
- Bore
- 6.7in
- Stroke
- 7.5in
- Displacement
- 2107in³
- Engine Configuration
- V-8, 4-Stroke-Cycle Diesel
- Bore
- 170 mm (6.7 in)
- Stroke
- 190 mm (7.5 in)
- Aspiration
- Turbocharged Aftercooled
- Displacement
- 34.53 L (2107 in³)
- Compression Ratio
- 13.0:1
- Rotation from Flywheel End
- Counterclockwise
- Lube System - Refill
- 424 L (448 qt)
-
Engine Dimensions (Approximate. Final dimensions dependent on selected options)
-
- Length
- 2136 mm (84 in)
- Width
- 1703 mm (67 in)
- Height
- 1720 mm (68 in)
- Weight, Net Dry (Basic Operating Engine Without Optional Attachments)
- 4309 kg (9500 lb)
-
Engine Dimensions - Approximate
-
- Length
- 84in
- Height
- 68in
- Width
- 67in
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 9500lb
- Length
- 84in
- Width
- 67in
- Height
- 68in
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 9500lb
- Height
- 1720 mm (68 in)
- Length
- 2136 mm (84 in)
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 4309 kg (9500 lb)
- Width
- 1703 mm (67 in)
Standard Equipment:
-
- Air Inlet System
-
- Aftercooler core, corrosion resistant coated (air side)
- Air cleaner. Regular duty, dry, panel type with service indicators, turbocharger, jacket water aftercooled.
- Turbocharger, rear mounted
- Jacket water aftercooled
-
- Control System
-
- Governor, RH, 3161 with self contained synthetic oil sump
- Air-fuel ratio control
- Mechanical speed control, without torque control
- Governor control
- Positive locking
-
- Cooling System
-
- Thermostats and housing
- Jacket water pump, centrifugal
-
- Exhaust System
-
- Exhaust manifold, dry
-
- Flywheels And Flywheel Housing
-
- SAE No. 0 flywheel
- 151 flywheel teeth
- SAE No. 0 flywheel housing
- SAE standard rotation
-
- Fuel System
-
- Fuel filter, with service indicators, cartridge type with RH service
- Fuel transfer pump
-
- Instrumentation
-
- Instrument Panel, RH
- Engine oil pressure gauge
- Fuel pressure gauge
- Oil filter differential gauge
- Jacket water temperature gauge
- Service meter, electric
- Tachometer
-
- Lube System
-
- Crankcase breather, top mounted
- Oil cooler
- Oil filler
- Oil dipstick
- Oil pump
- Oil filter, cartridge type with RH service
- Shallow oil pan
- Fumes disposal (not installed)
-
- Mounting System
-
- Rails, mounting, engine length, 254 mm (10 in), industrial-type, C-channel.
- Included on selected top level engines
-
- Power Take Off
-
- Accessory drive, upper RH
- Front housing, single sided
-
- Protection System
-
- Junction box
- Manual shutoff, RH
- Safety shutoff protection, energized to shutdown
- Low oil pressure, low idle 69 kPa (10 psi); high idle 207 kPa (30 psi)
- Water temperature
- Overspeed
- 3161 governor solenoid energized to shutdown
-
- Starting System
-
- Starting switch
-
- General
-
- Vibration damper
- Lifting eyes
- Paint: Caterpillar yellow, with optional colors available at request
