Cat® 3516C Industrial Diesel Engine
|
|
|
|
|
|
|
|
-
Power Rating
-
- Minimum Power
- 2100bhp
- Maximum Power
- 2100bhp
- Rated Speed
- 1750 rpm
- Minimum Power
- 2100HP
- Maximum Power
- 2100HP
- Rated Speed
- 1750 rpm
- Maximum Power
- 2100HP
- Maximum Torque
- 7563lb-ft @ 1300 rpm
- Rated Speed
- 1750 rpm
- Minimum Power
- 2100HP
- Maximum Torque
- 7563lb-ft @ 1300 rpm
-
Emission Standards
-
- Emissions
- U.S. EPA Tier 2 Nonroad Equivalent Emission Standards (Not Currently EPA Certified)
- Emissions
- U.S. EPA Tier 2 Nonroad Equivalent Emission Standards (Not Currently EPA Certified)
- Emissions
- U.S. EPA Tier 2 Nonroad Equivalent Emission Standards (Not Currently EPA Certified)
-
General
-
- Engine Configuration
- V-16, 4-Stroke-Cycle Diesel
- Bore
- 170 mm (6.7 in)
- Stroke
- 215 mm (8.5 in)
- Displacement
- 78 L (4760 in³)
- Aspiration
- Turbocharged Aftercooled
- Compression Ratio
- 14.7:1
- Rotation (from flywheel end)
- Counterclockwise
- Lube System (refill)
- 807 L (852 qt)
- Engine Configuration
- V-16, 4-Stroke-Cycle Diesel
- Bore
- 170 mm (6.7 in)
- Stroke
- 215 mm (8.5 in)
- Aspiration
- Turbocharged Aftercooled
- Displacement
- 78 L (4760 in³)
- Compression Ratio
- 14.7:1
- Rotation from Flywheel End
- Counterclockwise
- Lube System - Refill
- 807 L (852 qt)
- Engine Configuration
- V-16, 4-Stroke-Cycle Diesel
- Bore
- 6.7in
- Stroke
- 8.5in
- Displacement
- 4760in³
- Compression Ratio
- 14.7:1
- Aspiration
- Turbocharged Aftercooled
- Rotation from Flywheel End
- Counterclockwise
- Bore
- 6.7in
- Stroke
- 8.5in
- Displacement
- 4760in³
-
Engine Dimensions (Approximate. Final dimensions dependent on selected options)
-
- Length
- 3278 mm (129.1 in)
- Width
- 1530 mm (60.2 in)
- Height
- 2062 mm (81.2 in)
- Weight, Net Dry (Basic Operating Engine Without Optional Attachments)
- 7840 kg (17284 lb)
-
Engine Dimensions - Approximate
-
- Height
- 2062 mm (81.2 in)
- Length
- 3278 mm (129.1 in)
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 7840 kg (17284 lb)
- Width
- 1530 mm (60.2 in)
- Height
- 81.2in
- Width
- 60.2in
- Length
- 129.1in
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 17284lb
- Length
- 129.1in
- Width
- 60.2in
- Height
- 81.2in
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 17284lb
Standard Equipment:
-
- Air Inlet System
-
- Air to Air Aftercooled (ATAAC)
- Four turbochargers, center mounted
-
- Control System
-
- ADEM A4 ECM Electronic Engine Control, RH (10 amp DC power required)
-
- Cooling System
-
- Thermostats and housing
- Gear driven centrifugal jacket water pump
- Connections for radiator cooling
-
- Exhaust System
-
- Exhaust manifold, dry
- Four turbochargers with watercooled bearings
- Two exhaust outlets, 203 mm (8 in) round flange
-
- Flywheels And Flywheel Housing
-
- SAE No. 00 flywheel (183 teeth)
- SAE No. 00 flywheel housing
-
- Fuel System
-
- Fuel filter, LH spin-on type
- Fuel transfer pump
- Electronically controlled unit injectors
-
- Instrumentation
-
- No standard instrument or gauge panel
-
- Lube System
-
- Crankcase breather, top mounted
- Oil cooler
- Oil filler and dipstick, LH
- Oil pump
- Oil filter, LH, spin-on type
- Front sump oil pan, 500-hour change interval
-
- Mounting System
-
- Trunnion front support
-
- Power Take Off
-
- Front housing, two-sided
-
- Protection System
-
- ADEM A4 ECM monitoring system to provide customer programmable engine
- Deration strategies to protect against adverse operating conditions
- Emergency stop logic inputs provided at 40 pin customer interface connection
-
- Starting System
-
- Dual 24V electric starting motor, LH, unwired
-
- General
-
- Paint: Caterpillar yellow
- Vibration damper
- Lifting eyes
