Cat® 3606 Industrial Diesel Engine
|
|
|
|
|
|
|
|
-
Power Rating
-
- Minimum Power
- 1998.0bhp
- Maximum Power
- 2481.0bhp
- Rated Speed
- 750-1000 rpm
- Minimum Power
- 1998HP
- Maximum Power
- 2481HP
- Rated Speed
- 750-1000 rpm
- Maximum Torque
- 13424lb-ft @ 820 rpm
- Maximum Power
- 2481HP
- Rated Speed
- 750-1000 rpm
- Minimum Power
- 1998HP
-
Emission Standards
-
- Emissions
- Non-certified
- Emissions
- Non-Certified
- Emissions
- Non-Certified
-
General
-
- Engine Configuration
- Inline 6, 4-Stroke-Cycle Diesel
- Bore
- 280 mm (11 in)
- Stroke
- 300 mm (11.8 in)
- Displacement
- 110.8 L (6764 in³)
- Aspiration
- Turbocharged Aftercooled
- Compression Ratio
- 13:1
- Rotation (from flywheel end)
- Counterclockwise
- Engine Configuration
- Inline 6, 4-Stroke-Cycle Diesel
- Bore
- 280 mm (11 in)
- Stroke
- 300 mm (11.8 in)
- Aspiration
- Turbocharged Aftercooled
- Displacement
- 110.8 L (6764 in³)
- Compression Ratio
- 13:01
- Rotation from Flywheel End
- Counterclockwise
- Engine Configuration
- Inline 6, 4-Stroke-Cycle Diesel
- Bore
- 11in
- Stroke
- 11.8in
- Displacement
- 6764in³
- Compression Ratio
- 13:01
- Aspiration
- Turbocharged Aftercooled
- Rotation from Flywheel End
- Counterclockwise
- Bore
- 11in
- Stroke
- 11.8in
- Displacement
- 6764in³
-
Engine Dimensions (Approximate. Final dimensions dependent on selected options)
-
- Length
- 3988 mm (157 in)
- Width
- 1748 mm (69 in)
- Height
- 2626 mm (103 in)
- Weight, Net Dry (Basic Operating Engine Without Optional Attachments)
- 15,680 kg (34,500 lb)
-
Engine Dimensions - Approximate
-
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 34500lb
- Height
- 2626 mm (103 in)
- Length
- 3988 mm (157 in)
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 15,680 kg (34,500 lb)
- Width
- 1748 mm (69 in)
- Width
- 69in
- Length
- 157in
- Height
- 103in
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 34500lb
- Length
- 157in
- Width
- 69in
- Height
- 103in
Standard Equipment:
-
- Air Inlet System
-
- Aftercooler core, corrosion resistant coated (air side)
- Air cleaner. Regular duty, dry, panel type with service indicators, turbocharger, jacket water aftercooled.
- Turbocharger, rear mounted
- Jacket water aftercooled
-
- Control System
-
- Governor, RH, 3161 with self contained synthetic oil sump
- Air-fuel ratio control
- Mechanical speed control, without torque control
- Governor control
- Positive locking
-
- Cooling System
-
- Thermostats and housing
- Jacket water pump, centrifugal
-
- Exhaust System
-
- Exhaust manifold, dry
-
- Flywheels And Flywheel Housing
-
- SAE No. 00 flywheel
- 183 flywheel teeth
- SAE No. 00 flywheel housing
-
- Fuel System
-
- Fuel filter, with service indicators, cartridge type with RH service
- Fuel transfer pump
-
- Instrumentation
-
- Instrument Panel, RH
- Engine oil pressure gauge
- Fuel pressure gauge
- Oil filter differential gauge
- Jacket water temperature gauge
- Service meter, electric
- Tachometer
-
- Lube System
-
- Crankcase breather, top mounted
- Oil cooler
- Oil filler
- Oil dipstick
- Oil pump
- Oil filter, cartridge type with RH service
- Shallow oil pan
-
- Mounting System
-
- Rails, mounting, engine length, 254 mm (10 in), industrial-type, C-channel.
-
- Power Take Off
-
- Accessory drive, upper RH
- Front housing, single sided
-
- Protection System
-
- Junction box
- Manual shutoff, RH
- Safety shutoff protection, energized to shutdown
- Low oil pressure, low idle 69 kPa (10 psi); high idle 207 kPa (30 psi)
- Water temperature
- Overspeed
- 3161 governor solenoid energized to shutdown
-
- Starting System
-
- Starting switch
-
- General
-
- Vibration damper
- Lifting eyes
- Paint: Caterpillar yellow, with optional colors available at request
