801-974-0511

Cat® C0.5 Diesel Engine

  • Home »
  • New Powers » Cat® C0.5 Diesel Engine
    Order Parts Request Service

    Cat® C0.5 Diesel Engine

    Email/Share
    Engine Configuration
    In-Line 2, 4-Stroke-Cycle
    Cooling System Capacity
    1.1 L (1.16 qt)
    Lube System (refill)
    1.6-2.0 L (1.7-2.1 qt)
    Length
    407 mm (16 in)

    General

    Engine Configuration
    In-Line 2, 4-Stroke-Cycle
    Cooling System Capacity
    1.1 L (1.16 qt)
    Lube System (refill)
    1.6-2.0 L (1.7-2.1 qt)
    Bore
    2.6in
    Stroke
    2.8in
    Displacement
    31in³
    Aspiration
    Naturally Aspirated (NA)
    Compression Ratio
    23.5:1
    Combustion System
    Indirect Injection
    Rotation from Flywheel End
    Counterclockwise
    Engine Configuration
    In-Line 2
    Bore
    67 mm (2.64 in)
    Stroke
    72 mm (2.83 in)
    Displacement
    0.5 L (31 in³)
    Cooling System - Capacity
    1.1 L (1.16 qt)
    Lube System - Refill
    1.6-2.0 L (1.7-2.1 qt)

    Engine Dimensions (Approximate. Final dimensions dependent on selected options)

    Length
    407 mm (16 in)
    Width
    371 mm (14.6 in)
    Height
    523 mm (20.6 in)
    Weight - Net Dry (Basic Operating Engine Without Optional Attachments)
    57 kg (126 lb)

    Power Rating

    Minimum Power
    11HP
    Maximum Power
    13.7HP
    Rated Speed
    2000-3600 rpm
    Maximum Torque
    22lb-ft @ 2600 rpm

    Emission Standards

    Emissions
    U.S. EPA Tier 4 Final, EU Stage V

    Engine Dimensions - Approximate

    Height
    523 mm (20.6 in)
    Length
    407 mm (16 in)
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
    57 kg (126 lb)
    Width
    371 mm (14.6 in)
    Width
    14.6in
    Height
    20.6in
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
    126lb
    Length
    16in

    Standard Equipment:

    • Air Inlet System
      • Inlet manifold with choice of inlets.
    • Control System
      • Alternator 12 volt 14 amp
      • Starter motor 12 volt
      • Glow plug starting aid
    • Cooling System
      • Belt-driven coolant pump
      • Coolant temperature switch
      • Choice of cooling fans
    • Flywheel And Flywheel Housing
      • U.S. EPA Tier 4 Final: Standard backplate flywheel housing and flatface flywheel
    • Fuel System
      • Fuel injection pump
      • Spin-on fuel filter
      • Electronic Shut-off Solenoid (ESOS)
    • Lube System
      • Closed circuit breather
      • Spin-on lube oil filter
      • Lube oil pressure switch
      • Lube oil sump
    • General
      • Cast iron, engine block
      • Cast iron exhaust manifold--side outlet
      • Cold start capability to -20° C (-4° F)
      • Gradeability 35° continuous
      • Paint: Caterpillar yellow, with optional colors available at request

    Optional Equipment: