801-974-0511

Cat® C0.7 Diesel Engine

  • Home »
  • New Powers » Cat® C0.7 Diesel Engine
    Order Parts Request Service

    Cat® C0.7 Diesel Engine

    Email/Share
    Engine Configuration
    In-Line 3, 4-Stroke-Cycle Diesel
    Cooling System Capacity
    1.2 L (1.27 qt)
    Lube System (refill)
    2.35-3.05 L (2.48-3.22 qt)
    Length
    480 mm (18.9 in)

    General

    Engine Configuration
    In-Line 3, 4-Stroke-Cycle Diesel
    Cooling System Capacity
    1.2 L (1.27 qt)
    Lube System (refill)
    2.35-3.05 L (2.48-3.22 qt)
    Bore
    2.6in
    Stroke
    2.8in
    Displacement
    46.5in³
    Aspiration
    Naturally Aspirated (NA)
    Compression Ratio
    23.5:1
    Combustion System
    Indirect Injection
    Rotation from Flywheel End
    Counterclockwise
    Engine Configuration
    In-Line 3
    Bore
    67 mm (2.64 in)
    Stroke
    72 mm (2.83 in)
    Displacement
    0.76 L (46.5 in³)
    Cooling System - Capacity
    1.2 L (1.27 qt)
    Lube System - Refill
    2.35-3.05 L (2.48-3.22 qt)

    Engine Dimensions (Approximate. Final dimensions dependent on selected options)

    Length
    480 mm (18.9 in)
    Width
    371 mm (14.6 in)
    Height
    528 mm (20.8 in)
    Weight - Net Dry (Basic Operating Engine Without Optional Attachments)
    71 kg (156.6 lb)

    Power Rating

    Maximum Torque
    32lb-ft @ 2400 rpm
    Minimum Power
    11.8HP
    Maximum Power
    17.8HP
    Rated Speed
    2200-3600 rpm

    Engine Dimensions - Approximate

    Length
    18.9in
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
    156.6lb
    Width
    14.6in
    Height
    20.8in
    Height
    528 mm (20.8 in)
    Length
    480 mm (18.9 in)
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
    71 kg (156.6 lb)
    Width
    371 mm (14.6 in)

    Emission Standards

    Emissions
    U.S. EPA Tier 4 Final, EU Stage V

    Standard Equipment:

    • Air Inlet
      • Inlet manifold with choice of inlets.
    • Control System
      • Alternator 12 volt 14 amp
      • Starter motor 12 volt
      • Glow plug starting aid
    • Cooling System
      • Belt-driven coolant pump
      • Coolant temperature switch
      • Choice of cooling fans
    • Flywheel And Flywheel Housing
      • SAE No. 6 1/2 flywheel
      • Choice of SAE No. 5 or standard backplate flywheel housing
    • Fuel System
      • Fuel injection pump
      • Spin-on fuel filter
      • Electronic Shut-off Solenoid (ESOS)
    • Lube System
      • Closed circuit breather
      • Spin-on lube oil filter
      • Lube oil pressure switch
      • Lube oil sump
    • General
      • Cast iron, engine block
      • Cast iron exhaust manifold--side outlet
      • Cold start capability to -20° C (-4° F)
      • Gradeability 35° continuous
      • Paint: Caterpillar yellow, with optional colors available at request

    Optional Equipment: