801-974-0511

Cat® C1.5 Diesel Engine

  • Home »
  • New Powers » Cat® C1.5 Diesel Engine
    Order Parts Request Service

    Cat® C1.5 Diesel Engine

    Email/Share
    Engine Configuration
    In-Line 3, 4-Stroke-Cycle Diesel
    Cooling System Capacity
    2.6 L (2.75 qt)
    Lube System (refill)
    6 L (6.3 qt)
    Length
    572 mm (22.5 in)

    General

    Engine Configuration
    In-Line 3, 4-Stroke-Cycle Diesel
    Cooling System Capacity
    2.6 L (2.75 qt)
    Lube System (refill)
    6 L (6.3 qt)
    Engine Configuration
    In-Line 3
    Bore
    84 mm (3.3 in)
    Stroke
    90 mm (3.5 in)
    Displacement
    1.496 L (91 in³)
    Cooling System - Capacity
    2.6 L (2.75 qt)
    Lube System - Refill
    6 L (6.3 qt)
    Bore
    3.3in
    Stroke
    3.5in
    Displacement
    91in³
    Aspiration
    Naturally Aspirated (NA)
    Compression Ratio
    22.5:1
    Combustion System
    Indirect Injection
    Rotation from Flywheel End
    Counterclockwise

    Engine Dimensions (Approximate. Final dimensions dependent on selected options)

    Length
    572 mm (22.5 in)
    Width
    453-512 mm (17.8-20.2 in)
    Height
    643 mm (25.3 in)
    Weight - Net Dry (Basic Operating Engine Without Optional Attachments)
    149-156.5 kg (328.5-345 lb)

    Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)

    Length
    449 mm, 17.6 in (Tier 4 Final only)
    Weight
    13 kg (28.7 lb) (Tier 4 Final, >19 kW/25 hp only)
    Diameter
    170 mm (6.7 in) (Tier 4 Final only)

    Power Rating

    Maximum Torque
    63.4lb-ft @ 1800 rpm
    Minimum Power
    24.6HP
    Maximum Power
    24.6HP
    Rated Speed
    2200/2800 rpm

    Engine Dimensions - Approximate

    Width
    17.9in
    Length
    22.5in
    Height
    25.3in
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
    327lb
    Height
    643 mm (25.3 in)
    Length
    572 mm (22.5 in)
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
    148 kg (327 lb)
    Width
    453 mm (17.9 in)

    Aftertreatment Dimensions - Approximate

    Diameter
    170 mm (6.7 in)
    Length
    449 mm, 17.6 in
    Weight
    13 kg (28.7 lb) (Tier 4 Final, >19 kW/25 hp only)

    Emission Standards

    Emissions
    U.S. EPA Tier 4 Final

    Standard Equipment:

    • Air Inlet System
      • Inlet manifold with choice of inlets.
    • Control System
      • Alternator 12 volt 65 amp
      • Starter motor 12 volt
      • Glow plug starting aid
      • Tier 4 Final: Alternator 12V 85 amp
    • Cooling System
      • Belt-driven coolant pump
      • Coolant temperature switch
      • Choice of cooling fans
    • Flywheel & Flywheel Housing
      • Naturally Aspirated: SAE No. 7 1/2 flywheel
      • Naturally Aspirated: Choice of SAE No. 4 or standard backplate flywheel housing
    • Fuel System
      • Fuel injection pump
      • Spin-on fuel filter
      • Electronic Shut-off Solenoid (ESOS)
    • Lube System
      • Alternative oil fillers
      • Spin-on lube oil filter
      • Lube oil pressure switch
      • Lube oil sump
    • Power Take Off (pto)
      • Provision for Power Take Off (PTO)
    • General
      • Cast iron, engine block
      • Cast iron exhaust manifold--side outlet
      • Cold start capability to -20° C (-4° F)
      • Gradeability 35° continuous

    Optional Equipment: