801-974-0511

Cat® C11 Industrial Power Unit

  • Home »
  • New Powers » Cat® C11 Industrial Power Unit
    Order Parts Request Service

    Cat® C11 Industrial Power Unit

    Email/Share
    Minimum Rating
    325.0 bhp
    Maximum Rating
    385.0 bhp
    Emissions
    China Stage II, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent
    Rated Speed
    1800-2100 rpm

    Power Rating

    Minimum Rating
    325.0bhp
    Maximum Rating
    385.0bhp
    Rated Speed
    1800-2100 rpm
    Maximum Power
    451HP
    Rated Speed
    1800-2100 rpm
    Minimum Power
    325HP
    Maximum Power
    385HP
    Minimum Power
    325HP
    Minimum Rating
    325BHP
    Maximum Rating
    385BHP
    Rated Speed
    1800-2100 rpm

    Emission Standards

    Emissions
    China Stage II, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent
    Emissions
    Brazil MAR-1, UN R96 Stage IIIA, U.S. EPA Tier 3
    Emissions
    China Stage II, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent

    General

    Engine Configuration
    Inline 6, 4-Stroke-Cycle Diesel
    Bore
    130 mm (5.1 in)
    Stroke
    140 mm (5.5 in)
    Displacement
    11 L (677 in³)
    Aspiration
    Turbocharged Aftercooled (TA)
    Compression Ratio
    17.2:1
    Rotation (from flywheel end)
    Counterclockwise
    Cooling System Capacity
    14.2 L (15 qt)
    Engine Configuration
    Inline 6, 4-Stroke-Cycle Diesel
    Bore
    5.1in
    Stroke
    5.5in
    Displacement
    677.4in³
    Compression Ratio
    17.2:1
    Aspiration
    Turbocharged Aftercooled (TA)
    Rotation from Flywheel End
    Counterclockwise
    Bore
    5.1in
    Stroke
    5.5in
    Displacement
    677in³
    Engine Configuration
    Inline 6, 4-Stroke-Cycle Diesel
    Bore
    130 mm (5.1 in)
    Stroke
    140 mm (5.5 in)
    Displacement
    11 L (677 in³)
    Aspiration
    Turbocharged Aftercooled (TA)
    Compression Ratio
    17.2:1
    Rotation from Flywheel End
    Counterclockwise
    Cooling System - Capacity
    14.2 L (15 qt)

    Power Unit Dimensions (Approximate. Final dimensions dependent on selected options)

    Length
    1203 mm (47.4 in)
    Width
    1054 mm (41.5 in)
    Height
    1186 mm (46.7 in)

    Power Unit Dimensions

    Weight
    3730lb
    Weight
    3730lb

    Power Unit Dimensions - Approximate

    Weight - Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
    1692 kg (3730 lb)
    Height
    1186 mm (46.7 in)
    Length
    1203 mm (47.4 in)
    Width
    1054 mm (41.5 in)

    Standard Equipment:

    • Air Inlet System
      • Turbocharged
      • Air-to-Air Aftercooled
    • Control System
      • Electronic governing, PTO speed control
      • Programmable ratings
      • Automatic altitude compensation
      • Power compensation for fuel temperature
      • Programmable low and high idle and total engine limit
      • Electronic diagnostics and fault logging
      • Engine monitoring system SAE J1939 broadcast and control
      • ADEM™ A4 Electronic Control Unit (ECU)
    • Cooling System
      • Thermostats and housing, vertical outlet
      • Jacket water pump, centrifugal
      • Water pump, inlet
    • Exhaust System
      • Exhaust manifold, dry
      • Optional exhaust outlet
    • Flywheels And Flywheel Housing
      • SAE No. 1 flywheel housing
    • Fuel System
      • MEUI injection
      • Fuel filter, secondary (2 micron)
      • ACERT™ Technology
      • Fuel transfer pump
      • Fuel priming pump
    • Lube System
      • Crankcase breather
      • Oil cooler
      • Oil filler
      • Lube oil filter
      • Front sump oil pan
      • Oil dipstick
      • Gear driven oil pump
    • General
      • Vibration damper
      • Lifting eyes
      • Cold start capability to -20° C (-4° F)
      • Paint: Caterpillar yellow, with optional colors available at request

    Optional Equipment: