Cat® C13 Diesel Engine
|
|
|
|
|
|
|
|
-
General
-
- Engine Configuration
- In-Line 6, 4-Stroke-Cycle Diesel
- Cooling System Capacity
- 18.7 L (19.8 qt)
- Lube System (refill)
- 34 L (35.9 qt)
- Engine Configuration
- In-Line 6
- Bore
- 130 mm (5.1 in)
- Stroke
- 157 mm (6.2 in)
- Displacement
- 12.5 L (762.8 in³)
- Cooling System - Capacity
- 18.7 L (19.8 qt)
- Lube System - Refill
- 34 L (35.9 qt)
- Bore
- 5.1in
- Stroke
- 6.2in
- Displacement
- 762.8in³
- Aspiration
- Turbocharged-Aftercooled (TA)
- Compression Ratio
- 17.0:1
- Combustion System
- Direct Injection
- Rotation from Flywheel End
- Counterclockwise
-
Engine Dimensions (Approximate. Final dimensions dependent on selected options)
-
- Length
- 1203-1272 mm (47.2-50.1 in)
- Width
- 933-996 mm (36.74-39.2 in)
- Height
- 1132-1186 mm (44.6-46.7 in)
- Weight - Net Dry (Basic Operating Engine Without Optional Attachments)
- 1143-1350 kg (2520-2976 lb)
-
Cat Regeneration System Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)
-
- Length
- 1053-1077 mm (41.5-42.4 in)
- Width
- 779.8-1069 mm (30.7-42.1 in)
- Height
- 451.3-654 mm (17.8-25.7 in)
- Weight
- 248-259 kg (547-571 lb)
- Diameter
- 330.2 mm (13 in)
-
PETU Dimensions (Tier 4 Final, Stage IV Only)
-
- Length
- 854 mm (33.6 in)
- Width
- 287 mm (11.3 in)
- Volume Capacity
- 48.4 L (51.1 qt)
- Weight
- 19.42 kg (42.8 lb)
- Height
- 551 mm (21.7 in)
-
Engine Dimensions - Approximate
-
- Height
- 1132-1186 mm (44.6-46.7 in)
- Length
- 1203-1272 mm (47.2-50.1 in)
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 1143-1350 kg (2520-2976 lb)
- Width
- 933-996 mm (36.74-39.2 in)
- Length
- 50in
- Width
- 39in
- Height
- 45in
-
Cat Regeneration System Aftertreatment Dimensions - Approximate
-
- Diameter
- 330.2 mm (13 in)
- Height
- 451.3-654 mm (17.8-25.7 in)
- Length
- 1053-1077 mm (41.5-42.4 in)
- Weight
- 248-259 kg (547-571 lb)
- Width
- 779.8-1069 mm (30.7-42.1 in)
-
PETU Dimensions - Tier 4 Final, Stage IV Only
-
- Height
- 551 mm (21.7 in)
- Length
- 854 mm (33.6 in)
- Volume Capacity
- 48.4 L (51.1 qt)
- Weight
- 19.42 kg (42.8 lb)
- Width
- 287 mm (11.3 in)
-
Passive Regeneration System Aftertreatment Dimensions - Approximate
-
- Height
- 547.2 mm (21.5 in)
- Length
- 974.8 mm (38.4 in)
- Weight
- 140 kg (308.6 lb)
- Width
- 958.3 mm (37.7 in)
-
Passive Regeneration System Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)
-
- Length
- 974.8 mm (38.4 in)
- Width
- 958.3 mm (37.7 in)
- Height
- 547.2 mm (21.5 in)
- Weight
- 140 kg (308.6 lb)
-
Power Rating
-
- Minimum Power
- 385HP
- Maximum Power
- 520HP
- Rated Speed
- 1800-2100 rpm
- Maximum Torque
- 1756lb-ft @ 1400 rpm
-
Emission Standards
-
- Emissions
- U.S. EPA Tier 4 Final
-
Aftertreatment Dimensions
-
- Length
- 42in
- Weight
- 571lb
-
PETU Dimensions - Tier 4 Final Only
-
- Volume Capacity
- 51.1qt (US)
Standard Equipment:
-
- Air Inlet System
-
- Turbocharged
- Air-to-Air Aftercooled
- Mid-mount turbocharged system with front and rear exhaust configurations (Tier 4 Final, Stage IV)
-
- Control System
-
- Electronic control system
- Over-foam wiring harness
- Automatic altitude compensation
- Power compensated for fuel temperature
- Configurable software features
- Engine monitoring system SAE J1939 broadcast and control
- Integrated Electronic Control Unit (ECU)
- Remote fan control
-
- Cooling System
-
- Vertical or RH thermostat outlet
- Centrifugal water pump
- Guidance on cooling system design available through your dealer to ensure equipment reliability
-
- Flywheels And Flywheel Housing
-
- SAE No. 1 flywheel housing
- Available SAE No. 1 power take off with optional SAE A, SAE B or SAE C power take off drives. Engine power can also be taken from the front of the engine with optional attachments. (Tier 4 Final, Stage IV).
-
- Fuel System
-
- MEUI injection
- Primary fuel filter
- Secondary fuel filters
- Fuel transfer pump
- Electronic fuel priming
-
- Lube System
-
- Open crankcase ventilation system
- Oil cooler
- Oil filler
- Lube oil filter
- Oil dipstick
- Gear driven oil pump
- Choice of front, rear or center sumps
- Open crankcase ventilation system with fumes disposal (optional OCV filter system) (Tier 4 Final, Stage IV)
-
- Power Take Off (pto)
-
- SAE A, SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.
-
- General
-
- Paint: Caterpillar yellow, with optional colors available at request
-
- U.s. Epa Tier 4 Interim, Eu Stage Iiib Aftertreatment / Clean Emissions Control Equipment
-
- Cat Regeneration System
- Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
- NOx Reduction System (NRS)
- Flex pipe connection kit with 90° rotatable elbows to attach to Cat Regeneration System Inlet
- Available in 12 volt or 24 volt systems
-
- U.s. Epa Tier 4 Final, Eu Stage Iv Aftertreatment
-
- Cat Regeneration System
- Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
- Aftertreatment Electronic Control Unit (ECU)
- NOx Reduction System (NRS)
- Pump Electronic Control Unit (PETU)
- Selective Catalytic Reduction (SCR)
- Available in 12V or 24V systems
