Cat® C15 Industrial Power Unit
|
|
|
|
|
|
|
|
-
Power Rating
-
- Minimum Rating
- 440.0bhp
- Maximum Rating
- 540.0bhp
- Rated Speed
- 1800-2100 rpm
- Minimum Rating
- 440BHP
- Maximum Rating
- 540BHP
- Rated Speed
- 1800-2100 rpm
- Maximum Power
- 540HP
- Rated Speed
- 1800-2100 rpm
- Minimum Power
- 440HP
- Maximum Power
- 540HP
- Minimum Power
- 440HP
-
Emission Standards
-
- Emissions
- China Stage II, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent
- Emissions
- China Stage II, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent
- Emissions
- China Stage II, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent
-
General
-
- Engine Configuration
- Inline 6, 4-Stroke-Cycle Diesel
- Bore
- 137.2 mm (5.4 in)
- Stroke
- 171.4 mm (6.75 in)
- Displacement
- 15.2 L (927.56 in³)
- Aspiration
- Turbocharged Aftercooled (TA)
- Compression Ratio
- 18:1
- Rotation (from flywheel end)
- Counterclockwise
- Engine Configuration
- Inline 6, 4-Stroke-Cycle Diesel
- Bore
- 137.2 mm (5.4 in)
- Stroke
- 171.4 mm (6.75 in)
- Displacement
- 15.2 L (927.56 in³)
- Aspiration
- Turbocharged Aftercooled (TA)
- Compression Ratio
- 18.0:1
- Rotation from Flywheel End
- Counterclockwise
- Engine Configuration
- Inline 6, 4-Stroke-Cycle Diesel
- Bore
- 5.4in
- Stroke
- 6.8in
- Displacement
- 927.6in³
- Compression Ratio
- 18.0:1
- Aspiration
- Turbocharged Aftercooled (TA)
- Rotation from Flywheel End
- Counterclockwise
- Bore
- 5.4in
- Stroke
- 6.8in
- Displacement
- 927.6in³
-
Power Unit Dimensions (Approximate. Final dimensions dependent on selected options)
-
- Length
- 2447.7 mm (96.4 in)
- Width
- 1316.6 mm (51.8 in)
- Height
- 2629.5 mm (103.5 in)
-
Power Unit Dimensions - Approximate
-
- Height
- 2629.5 mm (103.5 in)
- Length
- 2447.7 mm (96.4 in)
- Width
- 1316.6 mm (51.8 in)
- Weight - Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
- 2055 kg (4531.5 lb)
-
Power Unit Dimensions
-
- Weight
- 4532lb
- Weight
- 4532lb
Standard Equipment:
-
- Air Inlet System
-
- Turbocharged
- Air-to-Air Aftercooled
-
- Control System
-
- Electronic governing, PTO speed control
- Programmable ratings
- Automatic altitude compensation
- Power compensation for fuel temperature
- Programmable low and high idle and total engine limit
- Electronic diagnostics and fault logging
- Engine monitoring system SAE J1939 broadcast and control
- ADEM™ A4 Electronic Control Unit (ECU)
-
- Cooling System
-
- Thermostats and housing, vertical outlet
- Jacket water pump, centrifugal
- Water pump, inlet
-
- Exhaust System
-
- Exhaust manifold, dry
- Optional exhaust outlet
-
- Flywheels And Flywheel Housing
-
- SAE No. 1 flywheel housing
-
- Fuel System
-
- MEUI injection
- Fuel filter, secondary (2 micron)
- ACERT™ Technology
- Fuel transfer pump
- Fuel priming pump
-
- Lube System
-
- Crankcase breather
- Oil cooler
- Oil filler
- Lube oil filter
- Front sump oil pan
- Oil dipstick
- Gear driven oil pump
-
- General
-
- Vibration damper
- Lifting eyes
- Cold start capability to -20° C (-4° F)
- Paint: Caterpillar yellow, with optional colors available at request
