Cat® C2.2 Diesel Engine
|
|
|
|
|
|
|
|
-
Power Rating
-
- Minimum Power
- 41.6bhp
- Maximum Power
- 66.1bhp
- Rated Speed
- 2200-3000 rpm
- Maximum Power
- 66HP
- Maximum Torque
- 153lb-ft @ 1800 rpm
- Rated Speed
- 2200-3000 rpm
- Minimum Power
- 41.6HP
- Minimum Power
- 41.6HP
- Maximum Power
- 66HP
- Rated Speed
- 2200-3000 rpm
- Maximum Torque
- 153lb-ft @ 1800 rpm
-
Emission Standards
-
- Emissions
- U.S. EPA Tier 4 Interim Equivalent
- Emissions
- U.S. EPA Tier 4 Interim Equivalent
- Emissions
- U.S. EPA Tier 4 Interim Equivalent
-
General
-
- Engine Configuration
- Inline 4, 4-Stroke-Cycle Diesel
- Bore
- 84 mm (3.3 in)
- Stroke
- 100 mm (3.9 in)
- Displacement
- 2.216 L (135 in³)
- Aspiration
- Naturally Aspirated (NA), Turbocharged (T) or Turbocharged Aftercooled (TA)
- Compression Ratio
- 23.3:1
- Combustion System
- Indirect Injection
- Rotation (from flywheel end)
- Counterclockwise
- Lube System (refill)
- 10.6 L (11.2 qt)
- Engine Configuration
- Inline 4, 4-Stroke-Cycle Diesel
- Bore
- 3.3in
- Stroke
- 3.9in
- Displacement
- 135in³
- Compression Ratio
- 23.3:1
- Aspiration
- Naturally Aspirated (NA), Turbocharged (T) or Turbocharged Aftercooled (TA)
- Combustion System
- Indirect Injection
- Rotation from Flywheel End
- Counterclockwise
- Bore
- 3.3in
- Stroke
- 3.9in
- Displacement
- 135in³
- Engine Configuration
- Inline 4, 4-Stroke-Cycle Diesel
- Bore
- 84 mm (3.3 in)
- Stroke
- 100 mm (3.9 in)
- Aspiration
- Naturally Aspirated (NA), Turbocharged (T) or Turbocharged Aftercooled (TA)
- Displacement
- 2.216 L (135 in³)
- Compression Ratio
- 23.3:1
- Combustion System
- Indirect Injection
- Rotation from Flywheel End
- Counterclockwise
- Lube System - Refill
- 10.6 L (11.2 qt)
-
Engine Dimensions (Approximate. Final dimensions dependent on selected options)
-
- Length
- 660-664 mm (26-26.14in)
- Width
- 459-531 mm (18.1-21 in)
- Height
- 725 mm (28.5 in)
- Weight, Net Dry (Basic Operating Engine Without Optional Attachments)
- 184-194 kg (406-427.7 lb)
-
Engine Dimensions - Approximate
-
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 427.7lb
- Length
- 26in
- Width
- 19.3in
- Height
- 27.5in
- Width
- 19.3in
- Height
- 27.5in
- Length
- 26in
- Height
- 676-698 mm (26.6-27.5 in)
- Length
- 662 mm (26.0 in)
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 184-194 kg (406-427.7 lb)
- Width
- 464-489 mm (18.3-19.3 in)
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 427.7lb
Standard Equipment:
-
- Air Inlet System
-
- Inlet manifold with choice of inlets.
-
- Control System
-
- Alternator 12 volt 65 amp
- Starter motor 12 volt
- Glow plug starting aid
-
- Cooling System
-
- Belt-driven coolant pump
- Coolant temperature switch
- Choice of cooling fans
-
- Flywheels And Flywheel Housing
-
- SAE No. 7 1/2, SAE No. 8 or SAE No. 10 flywheel
- Choice of SAE No. 4 or standard backplate flywheel housing
-
- Fuel System
-
- Fuel injection pump
- Spin-on fuel filter
- Electronic Shut-off Solenoid (ESOS)
-
- Lube System
-
- Alternative oil fillers
- Spin-on lube oil filter
- Lube oil pressure switch
- Lube oil sump
-
- General
-
- Cast iron, engine block
- Cast iron exhaust manifold--side outlet
- Cold start capability to -20° C (-4° F)
- Gradeability 35° continuous
- Paint: Caterpillar yellow, with optional colors available at request
