Cat® C2.8 Industrial Diesel Engine
|
|
|
|
|
|
|
|
-
Power Rating
-
- Minimum Power
- 74bhp
- Maximum Power
- 74bhp
- Rated Speed
- 2200-2500 rpm
- Maximum Power
- 74HP
- Maximum Torque
- 221lb-ft @ 1600 rpm
- Rated Speed
- 2200-2400 rpm
- Minimum Power
- 67HP
- Minimum Power
- 67HP
- Maximum Power
- 74HP
- Rated Speed
- 2200-2400 rpm
- Maximum Torque
- 221lb-ft @ 1600 rpm
-
Emission Standards
-
- Emissions
- U.S. EPA Tier 3 Nonroad Equivalent Emission Standards (Not Currently EPA Certified). EU Stage IIIA Nonroad Equivalent Emission Standards (Non-Current for EU)
- Emissions
- UN ECE R96 Stage IIIA, Brazil MAR-1
- Emissions
- UN ECE R96 Stage IIIA, Brazil MAR-1
-
General
-
- Engine Configuration
- Inline 4, 4-Stroke-Cycle Diesel
- Bore
- 90 mm (3.5 in)
- Stroke
- 110 mm (4.3 in)
- Displacement
- 2.8 L (171 in³)
- Aspiration
- Turbocharged (T) and Turbocharged Aftercooled (TA)
- Compression Ratio
- 17.0:1
- Combustion System
- Direct Injection
- Rotation (from flywheel end)
- Counterclockwise
- Lube System (refill)
- 4 L (1.06 qt)
- Engine Configuration
- Inline 4, 4-Stroke-Cycle Diesel
- Bore
- 3.5in
- Stroke
- 4.3in
- Displacement
- 171in³
- Compression Ratio
- 17.0:1
- Aspiration
- Turbocharged (T) and Turbocharged Aftercooled (TA)
- Bore
- 3.5in
- Combustion System
- Direct Injection
- Stroke
- 4.3in
- Rotation from Flywheel End
- Counterclockwise
- Displacement
- 171in³
- Engine Configuration
- Inline 4, 4-Stroke-Cycle Diesel
- Bore
- 90 mm (3.5 in)
- Stroke
- 110 mm (4.3 in)
- Aspiration
- Turbocharged (T) and Turbocharged Aftercooled (TA)
- Displacement
- 2.8 L (171 in³)
- Compression Ratio
- 17.0:1
- Combustion System
- Direct Injection
- Rotation from Flywheel End
- Counterclockwise
- Lube System - Refill
- 4 L (1.06 qt)
-
Engine Dimensions (Approximate. Final dimensions dependent on selected options)
-
- Width
- 561 mm (22.1 in)
- Height
- 766 mm (30.2 in)
- Weight, Net Dry (Basic Operating Engine Without Optional Attachments)
- 245 kg (450 lb)
-
Engine Dimensions - Approximate
-
- Length
- 633 mm (24.9 in)
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 705lb
- Height
- 30.9in
- Length
- 24.9in
- Length
- 24.9in
- Width
- 21.2in
- Width
- 21.2in
- Height
- 30.9in
- Height
- 786 mm (30.9 in)
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 320 kg (705 lb)
- Width
- 538 mm (21.2 in)
- Length - Rear of Flywheel Housing to Front of Fan Pulley
- 635 mm (25 in)
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 705lb
Standard Equipment:
-
- Air Inlet System
-
- Induction manifolds
- Exhaust manifolds
-
- Control System
-
- Starter motor (12V or 24V)
- Alternator (12V or 24V)
- Electronic Control Unit (chassis mounted)
- Engine control sensors and robust wiring harness
- Data interface via CANbus J1939
-
- Flywheels And Flywheel Housing
-
- Flywheel housings – SAE 3 or SAE 4
- Choice of flywheel to match industry common hydraulic pumps and transmissions
- Side PTO with SAE A or SAE B interface
-
- Fuel System
-
- Fuel filter – preconnected but chassis mounted
- With water sensor
-
- Lube System
-
- Lubricating oil filters
- High incline oil pan – 35° continuous in all directions
-
- General
-
- Cold start capability to -20° C (-4° F) with standard equipment
- Paint: Caterpillar yellow, with optional colors available at request
