Cat® C27 Industrial Diesel Engine
|
|
|
|
|
|
|
|
-
Power Rating
-
- Minimum Power
- 800.0bhp
- Maximum Power
- 1150.0bhp
- Rated Speed
- 1800-2100 rpm
- Minimum Power
- 800HP
- Maximum Power
- 1150HP
- Rated Speed
- 1800-2100 rpm
- Maximum Power
- 1150HP
- Maximum Torque
- 3876lb-ft @ 1400 rpm
- Rated Speed
- 1800-2100 rpm
- Minimum Power
- 800HP
- Maximum Torque
- 3876lb-ft @ 1400 rpm
-
Emission Standards
-
- Emissions
- U.S. EPA Tier 2 Equivalent
- Emissions
- U.S. EPA Tier 2 Equivalent
- Emissions
- U.S. EPA Tier 2 Equivalent
-
General
-
- Engine Configuration
- V-12, 4-Stroke-Cycle Diesel
- Bore
- 137.2 mm (5.4 in)
- Stroke
- 152.4 mm (6.0 in)
- Displacement
- 27.03 L (1649.5 in³)
- Aspiration
- Turbocharged Aftercooled (TA)
- Compression Ratio
- 16.5:1
- Combustion System
- Direct Injection
- Rotation (from flywheel end)
- Counterclockwise
- Engine Configuration
- V-12, 4-Stroke-Cycle Diesel
- Bore
- 137.2 mm (5.4 in)
- Stroke
- 152.4 mm (6.0 in)
- Aspiration
- Turbocharged Aftercooled (TA)
- Displacement
- 27.03 L (1649.5 in³)
- Compression Ratio
- 16.5:1
- Combustion System
- Direct Injection
- Rotation from Flywheel End
- Counterclockwise
- Engine Configuration
- V-12, 4-Stroke-Cycle Diesel
- Bore
- 5.4in
- Stroke
- 6in
- Displacement
- 1649.5in³
- Compression Ratio
- 16.5:1
- Aspiration
- Turbocharged Aftercooled (TA)
- Combustion System
- Direct Injection
- Rotation from Flywheel End
- Counterclockwise
- Bore
- 5.4in
- Stroke
- 6in
- Displacement
- 1649.5in³
-
Engine Dimensions (Approximate. Final dimensions dependent on selected options)
-
- Length
- 1917 mm (75.5 in)
- Width
- 1464 mm (57.6 in)
- Height
- 1319 mm (51.9 in)
- Weight, Net Dry (Basic Operating Engine Without Optional Attachments)
- 2946 kg (6495 lb)
-
Engine Dimensions - Approximate
-
- Height
- 1319 mm (51.9 in)
- Length
- 1917 mm (75.5 in)
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 2946 kg (6495 lb)
- Width
- 1464 mm (57.6 in)
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 6495lb
- Length
- 75.5in
- Width
- 57.6in
- Height
- 51.9in
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 6495lb
- Length
- 75.5in
- Width
- 57.6in
- Height
- 51.9in
Standard Equipment:
-
- Air Inlet System
-
- Twin Turbocharged Aftercooled
- Air-to-Air Aftercooled
-
- Control System
-
- Electronic governing, PTO speed control
- Programmable ratings
- Automatic altitude compensation
- Power compensation for fuel temperature
- Programmable low and high idle and total engine limit
- Electronic diagnostics and fault logging
- Engine monitoring system SAE J1939 broadcast and control
- ADEM™ A4 Electronic Control Unit (ECU)
-
- Cooling System
-
- Thermostats and housing, vertical outlet
- Jacket water pump, centrifugal
- Water pump, inlet
-
- Exhaust System
-
- Exhaust manifold, dry
- Optional exhaust outlet
-
- Flywheels And Flywheel Housing
-
- SAE No. 1 flywheel housing
-
- Fuel System
-
- MEUI injection
- Fuel filter, secondary (2 micron)
- ACERT™ Technology
- Fuel transfer pump
- Fuel priming pump
-
- Lube System
-
- Crankcase breather
- Oil cooler
- Oil filler
- Lube oil filter
- Front sump oil pan
- Oil dipstick
- Gear driven oil pump
-
- General
-
- Vibration damper
- Lifting eyes
- Cold start capability to -20° C (-4° F)
- Paint: Caterpillar yellow, with optional colors available at request
