801-974-0511

Cat® C3.6 Diesel Engine

  • Home »
  • New Powers » Cat® C3.6 Diesel Engine
    Order Parts Request Service

    Cat® C3.6 Diesel Engine

    Download Product Brochure
    Email/Share
    Engine Configuration
    In-Line 4, 4-Stroke-Cycle Diesel
    Cooling System Capacity
    4 L (1.06 qt)
    DOC Length
    TBA
    DOC Weight
    TBA

    General

    Engine Configuration
    In-Line 4, 4-Stroke-Cycle Diesel
    Cooling System Capacity
    4 L (1.06 qt)
    Engine Configuration
    In-Line 4
    Bore
    98 mm (3.9 in)
    Stroke
    120 mm (4.7 in)
    Displacement
    3.6 L (220 in³)
    Cooling System - Capacity
    4 L (1.06 qt)
    Bore
    3.9in
    Stroke
    4.7in
    Displacement
    220in³
    Aspiration
    Turbocharged-Aftercooled (TA)
    Compression Ratio
    17.0:1
    Combustion System
    Direct Injection
    Rotation from Flywheel End
    Counterclockwise

    Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)

    DOC Length
    TBA
    DOC Weight
    TBA
    DOC Diameter
    TBA
    SCR Weight
    TBA
    SCR Diameter
    TBA

    Power Rating

    Maximum Torque
    406lb-ft @ 1500 rpm
    Minimum Power
    74HP
    Maximum Power
    134HP
    Rated Speed
    2000-2400 rpm

    Engine Dimensions - Approximate

    Length
    26.3in
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
    840lb
    Width
    22.2in
    Height
    31in
    Height
    787 mm (30.98 in)
    Length
    667 mm (26.3 in)
    Width
    564 mm (22.2 in)
    Dry Weight - Basic Operating Engine Without Optional Attachments
    381 kg (840 lbs)

    Aftertreatment Dimensions - Approximate

    DOC Diameter
    TBA
    DOC Length
    TBA
    DOC Weight
    TBA
    SCR Diameter
    TBA
    SCR Weight
    TBA
    SCR Length
    TBA

    Emission Standards

    Emissions
    U.S. EPA & CARB Tier 4 Final, EU Stage V

    Engine Dimensions (Approximate. Final dimensions dependent on selected options)

    Length
    667 mm (26.3 in)
    Width
    569 mm (22.4 in)
    Height
    776 mm (30.6 in)

    Standard Equipment:

    • Control System
      • Starter motor (12V or 24V)
      • Alternator (12V or 24V)
      • Electronic Control Unit (chassis mounted)
      • Engine control sensors and robust wiring harness
      • Data interface via CANbus J1939
    • Flywheels And Flywheel Housing
      • Flywheel housings – SAE 3 or SAE 4
      • Choice of flywheel to match industry common hydraulic pumps and transmissions
      • Side PTO with SAE A or SAE B interface
    • Fuel System
      • Fuel filter – preconnected but chassis mounted
      • With water sensor
    • Lube System
      • Lubricating oil filters
      • High incline oil pan – 35° continuous in all directions
    • General
      • Cold start capability to -20° C (-4° F) with standard equipment
      • Paint: Caterpillar yellow, with optional colors available at request
    • U.s. Epa Tier 4 Final, Eu Stage V Aftertreatment/ Clean Emissions Control Equipment
      • Diesel Oxidation Catalyst (DOC)
      • Selective Catalytic Reduction (SCR)
      • SCR Auxiliaries

    Optional Equipment: