Cat® C32 Diesel Engine

Cat® C32 Diesel Engine

The Cat® C32 Industrial Diesel Engine is offered in ratings ranging from 746-895 bkW (1000-1200 bhp) @ 1800 rpm. These ratings meet U.S. EPA Tier 4 Final emission standards. Applications powered by C32 engines include: Bore/Drill Rigs, Chippers/Grinders, Construction, Cranes, Dredgers, Forestry, Hydraulic Power Units, General Industrial, Irrigation Equipment, Material Handling, Mobile Earthmoving Equipment, Paving Equipment, Pumps, Shovels/Draglines, Surface Hauling Equipment and Trenchers.

Engine Configuration
V-12, 4-Stroke-Cycle Diesel
Cooling System Capacity
67.9 L (71.7 qt)
Lube System (refill)
68 L (71.9 qt)
Length
1874 mm (73.78 in)

General

Engine Configuration
V-12, 4-Stroke-Cycle Diesel
Cooling System Capacity
67.9 L (71.7 qt)
Lube System (refill)
68 L (71.9 qt)
Engine Configuration
V-12
Bore
145 mm (5.71 in)
Bore
5.7in
Stroke
162 mm (6.38 in)
Stroke
6.4in
Displacement
32.1 L (1958.9 in³)
Displacement
1958.9in³
Cooling System - Capacity
67.9 L (71.7 qt)
Aspiration
Twin Turbocharged Aftercooled (TTA)
Lube System - Refill
68 L (71.9 qt)
Compression Ratio
15.0:1
Combustion System
Direct Injection
Rotation from Flywheel End
Counterclockwise

Engine Dimensions (Approximate. Final dimensions dependent on selected options)

Length
1874 mm (73.78 in)
Width
1600 mm (63 in)
Height
1370 mm (53.9 in)
Weight - Net Dry (Basic Operating Engine Without Optional Attachments)
3004 kg (6625 lb)

Power Rating

Maximum Torque
4056lb-ft @ 1200 rpm
Minimum Power
1000HP
Maximum Power
1200HP
Rated Speed
1800 rpm

Engine Dimensions - Approximate

Length
73.8in
Weight - Net Dry - Basic Operating Engine Without Optional Attachments
6625lb
Height
53.9in
Width
63in
Height
1370 mm (53.9 in)
Length
1874 mm (73.78 in)
Weight - Net Dry - Basic Operating Engine Without Optional Attachments
3004 kg (6625 lb)
Width
1600 mm (63 in)

Emission Standards

Emissions
U.S. EPA Tier 4 Final

Standard Equipment:

  • Air Inlet System
    • Turbocharged
    • Air-to-Air Aftercooled
  • Control System
    • Electronic control system
    • Over-foam wiring harness
    • Automatic altitude compensation
    • Power compensated for fuel temperature
    • Configurable software features
    • Engine monitoring system SAE J1939 broadcast and control
  • Cooling System
    • Thermostats and housing, vertical outlet
    • Jacket water pump, centrifugal
    • Water pump, inlet
  • Exhaust System
    • Exhaust manifold, dry
    • Optional exhaust outlet
  • Flywheels And Flywheel Housing
    • Choice of SAE No. 0 or SAE No. 1 flywheel housing
  • Fuel System
    • MEUI injection
    • Fuel filter, secondary (2 micron)
    • Electronic fuel priming
  • Lube System
    • Open crankcase ventilation system
    • Oil cooler
    • Oil filler
    • Lube oil filter
    • Rear sump oil pan
    • Oil dipstick
    • Gear driven oil pump
  • General
    • Paint: Caterpillar yellow, with optional colors available at request

Optional Equipment: