Cat® C9 Industrial Power Unit
|
|
|
|
|
|
|
|
-
Power Rating
-
- Minimum Rating
- 275.0bhp
- Maximum Rating
- 350.0bhp
- Rated Speed
- 1800-2200 rpm
- Maximum Power
- 350HP
- Rated Speed
- 1800-2200 rpm
- Minimum Power
- 275HP
- Maximum Power
- 350HP
- Minimum Power
- 275HP
- Minimum Rating
- 275BHP
- Maximum Rating
- 350BHP
- Rated Speed
- 1800-2200 rpm
-
Emission Standards
-
- Emissions
- China Stage II, U.S. EPA Tier 2 Equivalent or U.S. EPA Tier 3 Equivalent, EU Stage II Equivalent or EU Stage IIIA Equivalent
- Emissions
- China Stage II, U.S. EPA Tier 2 Equivalent or U.S. EPA Tier 3 Equivalent, EU Stage II Equivalent or EU Stage IIIA Equivalent
- Emissions
- China Stage II, U.S. EPA Tier 2 Equivalent or U.S. EPA Tier 3 Equivalent, EU Stage II Equivalent or EU Stage IIIA Equivalent
-
General
-
- Engine Configuration
- Inline 6, 4-Stroke-Cycle Diesel
- Bore
- 112 mm (4.41 in)
- Stroke
- 149 mm (5.87 in)
- Displacement
- 8.8 L (537 in³)
- Aspiration
- Turbocharged Aftercooled (TA)
- Compression Ratio
- 16.3:1
- Rotation (from flywheel end)
- Counterclockwise
- Cooling System Capacity
- 44 L (46.5 qt)
- Lube System (refill)
- 32 L (33.8 qt)
- Engine Configuration
- Inline 6, 4-Stroke-Cycle Diesel
- Bore
- 4.4in
- Stroke
- 5.9in
- Displacement
- 537in³
- Compression Ratio
- 16.3:1
- Aspiration
- Turbocharged Aftercooled (TA)
- Rotation from Flywheel End
- Counterclockwise
- Bore
- 4.4in
- Stroke
- 5.9in
- Displacement
- 537in³
- Engine Configuration
- Inline 6, 4-Stroke-Cycle Diesel
- Bore
- 112 mm (4.41 in)
- Stroke
- 149 mm (5.87 in)
- Displacement
- 8.8 L (537 in³)
- Aspiration
- Turbocharged Aftercooled (TA)
- Compression Ratio
- 16.3:1
- Rotation from Flywheel End
- Counterclockwise
- Cooling System - Capacity
- 44 L (46.5 qt)
- Lube System - Refill
- 32 L (33.8 qt)
-
Power Unit Dimensions (Approximate. Final dimensions dependent on selected options)
-
- Length
- 2174.4 mm (85.81 in)
- Width
- 987.8 mm (38.89 in)
- Height
- 2008.1 mm (79.06 in)
-
Power Unit Dimensions
-
- Weight
- 3285lb
- Weight
- 3285lb
-
Power Unit Dimensions - Approximate
-
- Weight - Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
- 1490 kg (3285 lb)
- Height
- 2008.1 mm (79.06 in)
- Length
- 2174.4 mm (85.81 in)
- Width
- 987.8 mm (38.89 in)
Standard Equipment:
-
- Air Inlet System
-
- Turbocharged
- Air-to-Air Aftercooled
-
- Control System
-
- Electronic governing, PTO speed control
- Programmable ratings
- Automatic altitude compensation
- Power compensation for fuel temperature
- Programmable low and high idle and total engine limit
- Electronic diagnostics and fault logging
- Engine monitoring system SAE J1939 broadcast and control
- ADEM™ A4 Electronic Control Unit (ECU)
-
- Cooling System
-
- Thermostats and housing, vertical outlet
- Jacket water pump, centrifugal
- Water pump, inlet
-
- Exhaust System
-
- Exhaust manifold, dry
- Optional exhaust outlet
-
- Flywheels And Flywheel Housing
-
- SAE No. 1 flywheel housing
-
- Fuel System
-
- HEUI™ injection
- Fuel filter, secondary (2 micron)
- ACERT™ Technology
- Fuel transfer pump
- Fuel priming pump
-
- Lube System
-
- Crankcase breather
- Oil cooler
- Oil filler
- Lube oil filter
- Front sump oil pan
- Oil dipstick
- Gear driven oil pump
-
- General
-
- Vibration damper
- Lifting eyes
- Cold start capability to -20° C (-4° F)
- Paint: Caterpillar yellow, with optional colors available at request
