Cat®3054C Industrial Diesel Engine
Cat® 3054C Industrial Diesel Engines offer the perfect balance of durability, fuel efficiency and low emissions. Extensively tested on the job, these engines use a range of mechanical fuel systems and advanced control systems to deliver maximum uptime in the harshest environment. They have proven they can handle the toughest applications and deliver superior performance that exceeds the expectations of the most demanding users. Industries and applications powered by 3054C engines include: Agriculture, Aerial Lifts, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Compactors/Rollers, Compressors, Construction, Cranes, Crushers, Feller Bunchers, Forestry, Forklifts, General Industrial, Harvesters, Hydraulic Power Units, Irrigation Equipment, Loaders/Forwarders, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Sweepers, Paving Equipment, Pumps, Skidders, Specialty Ag Equipment, Sprayers, Trenchers, Turf and Landscaping and Underground Mining Equipment. 3054C engines, with ratings: 52-97 bkW (69.7-130 bhp) @ 2000-2400 rpm, meet U.S. EPA Tier 2 equivalent and EU Stage II equivalent emission standards and are available for non-regulated areas.
|
|
|
|
|
|
|
|
-
Power Rating
-
- Minimum Power
- 69.7bhp
- Maximum Power
- 130.0bhp
- Rated Speed
- 2200-2400 rpm
- Minimum Power
- 69.7HP
- Maximum Power
- 130HP
- Rated Speed
- 2200-2400 rpm
- Maximum Torque
- 369lb-ft @ 1400 rpm
-
Emission Standards
-
- Emissions
- U.S. EPA Tier 2 Equivalent, EU Stage II Equivalent
- Emissions
- U.S. EPA Tier 2 Equivalent, EU Stage II Equivalent
-
General
-
- Engine Configuration
- Inline 4, 4-Stroke-Cycle Diesel
- Bore
- 105 mm (4.13 in)
- Stroke
- 127 mm (5.0 in)
- Displacement
- 4.4 L (269 in³)
- Aspiration
- Naturally Aspirated (NA), Turbocharged (T) or Turbocharged Aftercooled (TA)
- Compression Ratio
- 16.2:1
- Combustion System
- Direct Injection
- Rotation (from flywheel end)
- Counterclockwise
- Lube System (refill)
- 11 L (11.6 qt)
- Bore
- 4.1in
- Stroke
- 5in
- Displacement
- 269in³
- Engine Configuration
- Inline 4, 4-Stroke-Cycle Diesel
- Bore
- 105 mm (4.13 in)
- Stroke
- 127 mm (5.0 in)
- Aspiration
- Naturally Aspirated (NA), Turbocharged (T) or Turbocharged Aftercooled (TA)
- Displacement
- 4.4 L (269 in³)
- Compression Ratio
- 16.2:1
- Combustion System
- Direct Injection
- Rotation from Flywheel End
- Counterclockwise
- Lube System - Refill
- 11 L (11.6 qt)
-
Engine Dimensions (Approximate. Final dimensions dependent on selected options)
-
- Length
- 663 mm (26.1 in)
- Width
- 470-620 mm (18.5-24.4 in)
- Height
- 775-810 mm (30.5-31.9 in)
- Weight, Net Dry (Basic Operating Engine Without Optional Attachments)
- 291-306 kg (640-674.6 lb)
-
Engine Dimensions - Approximate
-
- Width
- 24.4in
- Length
- 26.1in
- Height
- 31.9in
- Height
- 775-810 mm (30.5-31.9 in)
- Length
- 663 mm (26.1 in)
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 291-306 kg (640-674.6 lb)
- Width
- 470-620 mm (18.5-24.4 in)
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 674.6lb
Standard Equipment:
-
- Air Inlet System
-
- Inlet manifold with choice of inlets.
-
- Control System
-
- Alternator
- Starter motor
- Control Panel
- Glow plug starting aid
-
- Cooling System
-
- Top tank temperature 108° C (226° F) as standard to minimize cooling pack size
- 50:50 water glycol mix
-
- Flywheels And Flywheel Housing
-
- SAE No. 3 flywheel housing
- Flywheel and starter rings
-
- Fuel System
-
- Fuel filter positions
-
- Lube System
-
- Lubricating oil filters and breathers
- Oil filter positions
- Lube oil sump
-
- Power Take Off
-
- SAE B Power Take Off (PTO)
-
- General
-
- Timing case and gear-driven auxiliaries
- Belt-driven auxiliaries
- Engine mountings
- Gauges
- Displays
- Power and torque curve tailoring
- Paint: Caterpillar yellow, with optional colors available at request