3512C Land Electric-Drive Drilling Module
|
|
|
|
-
Engine Specifications
-
- Minimum Rating
- 1045.0ekW
- Maximum Rating
- 1045.0ekW
- Emissions
- U.S. EPA Nonroad Tier 2
- Engine Control and Protection
- ADEM A3
- Generator
- SR4B
- Aspiration
- Turbocharged-Aftercooled
- Bore
- 6.69in
- Stroke
- 7.48in
- Displacement
- 3158.0in3
- Fuel System
- EUI
- Oil Change Interval
- 500.0hr
- Weight
- 31864.0lb
- Generator Set Control
- EMCP 4.3
- Minimum Rating
- 1045ekW
- Maximum Rating
- 1045ekW
- Emissions
- U.S. EPA Nonroad Tier 2
- Aspiration
- Turbocharged-Aftercooled
- Bore
- 6.69in
- Displacement
- 3158in³
- Engine Control and Protection
- ADEM A3
- Fuel System
- EUI
- Generator
- SR4B
- Generator Set Control
- EMCP 4.3
- Oil Change Interval
- 500h
- Stroke
- 7.48in
- Weight
- 31864lb
- Voltage
- 600
-
Capacity for Liquids
-
- Lube Oil System (Refill)
- 84.0gal
- Cooling System (Engine)
- 41.0gal
- Cooling System - Engine
- 41gal (US)
- Lube Oil System - Refill
- 84gal (US)
-
Dimensions
-
- Width
- 91.2in
- Length
- 238.2in
- Height
- 104.7in
- Height
- 104.7in
- Length
- 238.2in
- Width
- 91.2in
Standard Equipment:
-
- Air Inlet System
-
- Corrosion-resistant aftercooler core
- Air Inlet shutoff
- Regular duty air cleaner
-
- Control System
-
- ADEM A3 ECU, left-hand mounted
- Direct rack control 0-200 mADC, space heater and jacket water heater connection and controls
-
- Cooling System
-
- Caterpillar supplied radiator, 46/CVS-stacked 0.627 ratio, includes blower fan, fan drive, pulley, belt guard, coolant level sensor, regulator, and fuel cooler
- Separate-circuit aftercooled
- Outlet controlled jacket water thermostat
- Jacket water pump - gear driven
- Dual outlet
- Aftercooler water pump - gear driven
- Aftercooler water thermostat
-
- Exhaust System
-
- Dry exhaust manifold
- Dual turbochargers, water cooled bearings
-
- Flywheel And Housing
-
- SAE No. 00 flywheel
- SAE No. 00 flywheel housing
- SAE standard rotation
-
- Fuel System
-
- Fuel filter simplex (LH) with priming pump (LH)
- Fuel transfer pump
- Fuel return line with flexible connection
- Electronic unit injectors
-
- Generator Attachments
-
- Barrel-mounted petroleum terminal box with air filter and pressure differential switch
-
- Instrumentation
-
- Emergency stop button
- Analog gauges:
- Service port connector
- Customer connection terminal blocks
-
- Emcp 4.3 Control Panel
-
- 140 mm (5.5 in) Graphical Display
- Communication
- Controls
- Generator Set Protection
- Outputs
- Inputs
- Other Features
-
- Lubrication System
-
- Crankcase breather
- Oil cooler
- Shallow oil pan
- Oil drain extension, 2 in NPT female connection
- Simplex oil filter
-
- Mounting System
-
- 4.19 m (165 in) length, 412 mm (16.2 in) height tubes, 1.18 m (50.5 in) wide
-
- Protection System
-
- Engine alarms, derate, and shutdown in abnormal operation
-
- Starting System
-
- TDI air starting motor, RH - 1034 kPa (150 psi)
-
- General
-
- Paint - Cat yellow
Optional Equipment:
-
- Air Inlet System
-
- Heavy duty air cleaner
- Remote air inlet adapter - rectangular
- Remote air inlet adapter - round
-
- Control System
-
- Engine control options:
- Load sharing governor, 2301A
-
- Cooling System
-
- Radiator options:
- Coolant level sensor
- Coolant conditioner
- Cooling system connection options (for use with customer-supplied radiator):
- Fan drive and belt guard (for use with remote and customersupplied radiators)
- Fan pulley options (for use with customer-supplied radiator):
-
- Exhaust System
-
- Exhaust expander 297 mm to 340 mm (11.7 in to 13.4 in)
- Flexible fitting, 356 mm (14 in)
- Elbow, 305 mm (12 in)
- Muffler, 356 mm (14 in), spark arresting, includes companion flanges, clean-out box, and spark box
- Muffler, 305 mm (12 in), spark arresting, includes companion flanges, clean-out box, and spark box
-
- Fuel System
-
- Custom fuel filter
- Primary fuel filter
- Primary fuel filter with water separator
-
- Generator Attachments
-
- Barrel-mounted petroleum terminal box
- Current transformers (3)
- Cable access box
-
- Instrumentation
-
- Communications module PL1000T
- Communications module PL1000E
- Thermocouples installed, one per cylinder
-
- Lubrication System
-
- Custom oil filter
- RH installed centrifugal oil filter
- SAE15W40, Caterpillar DEO, 500 hour
- Crankcase fumes disposal
- Oil level regulator
-
- Mounting System
-
- Custom inner base
- Custom outer base
- Package isolator supports (3), for mounting inner base to customer-supplied base
-
- Power Take-off
-
- Alternator, 24V, 68A
-
- Protection System
-
- Explosion relief valves (3)
- Metal particle detector switch
- Metal particle detector with annunciator
-
- Starting System
-
- Custom starting motor
- Air pressure regulator
-
- General
-
- LH installed engine barring group
- Jacket water heater, UL recognized, 120-240V, single phase, 6 kW, LH and RH mounted
- Jacket water heater, UL recognized, 120-480V, single phase, 12 kW, LH and RH mounted
- Jacket water heater lines