C18 ACERT™ Tier 4 Interim Engine

C18 ACERT™ Tier 4 Interim Engine

Length
60.2 in.
Width
37.8 in.
Height
51.0 in.
Weight
3482.0 lb

Dimensions

Length
60.2in.
Width
37.8in.
Height
51.0in.
Weight
3482.0lb
Length
60.2in
Width
37.8in
Height
51in
Weight
3482lb

General Specifications

Minimum Rating
600BHP
Maximum Rating
755BHP
Governor and Protection
Electronic ADEM™ A4
RPM
1900r/min
Aspiration
Turbocharged-Aftercooled
Displacement
1104.5in³
Flywheel and Flywheel Housing
SAE No. 0 or SAE No. 1
Flywheel Teeth
136 (SAE 0), 113 (SAE 1)
Rotation from Flywheel End
Counterclockwise
Stroke
7.2in
Bore
5.7in

Emissions

Emissions
U.S. EPA Tier 4 Interim, EU Stage IIIB

Capacity for Liquids

Cooling System
7.1gal (US)

Standard Equipment:

  • Air Inlet System
    • Turbocharged Aftercooled
  • Control System
    • Electronic control system, over-foam wiring harness, automatic altitude compensation, power compensated for fuel temperature, configurable software features, engine monitoring system SAE J1939 broadcast and control, integrated Electronic Control Unit (ECU) remote fan control
  • Cooling System
    • Vertical outlet thermostat housing, centrifugal water pump, guidance on cooling system design available to ensure machine reliability
  • Exhaust System
    • Clean Emissions Module (CEM) that includes Diesel Particulate Filter (DPF), Diesel Oxidation Catalyst (DOC), and Cat Regeneration System, optional exhaust outlet
  • Flywheels And Flywheel Housing
    • SAE 0 and SAE 1 flywheel housing
  • Fuel System
    • MEUI injection; primary fuel filter, secondary fuel filters, fuel transfer pump, electronic fuel priming
  • Lube System
    • Open crankcase ventilation system, oil cooler, oil filler, oil filter, oil dipstick, oil pump (gear driven), choice of sumps (front, rear, and center)
  • Power Take Off
    • SAE B and SAE C drives available, engine power can also be taken from the front of the engine on some applications
  • General
    • Paint: Cat yellow; vibration damper; lifting eyes

Optional Equipment: