299C Compact Track Loader
Fully suspended, steel embedded rubber track undercarriage provides a smooth ride, better load retention and greater productivity. Spacious, sealed and pressurized cab, low ground pressure, highly durable components and excellent drawbar performance help you get more done and increase your bottom line.
|
|
|
|
-
Engine
-
- Engine Model
- Cat® C3.4T
- Net Power
- 90.0hp
- Gross Power
- 94.0hp
- Gross Power SAE J1995
- 94.0hp
- Net Power SAE 1349
- 90.0hp
- Displacement
- 201.0in3
- Bore
- 3.7in
- Stroke
- 4.7in
- Engine Model
- Cat® C3.4T
- Net Power
- 90mm H2O
- Gross Power
- 94mm H2O
- Gross Power - SAE J1995
- 94mm H2O
- Net Power - SAE 1349
- 90mm H2O
- Displacement
- 201in³
- Bore
- 3.7in
- Stroke
- 4.7in
-
Power Train
-
- Travel Speed Forward
- 5.0mph
- Travel Speed Reverse
- 5.0mph
- Travel Speed Forward
- 5mile/h
- Travel Speed Reverse
- 5mile/h
- Travel Speed Reverse - 2-Speed
- 8.5mile/h
- Travel Speed Forward - 2-Speed
- 8.5mile/h
-
Weights
-
- Operating Weight
- 10730.0lb
- Operating Weight
- 10730lb
-
Operating Specifications
-
- Ground Contact Area
- 2504.0in2
- Ground Pressure
- 4.3psi
- Tipping Load
- 8338.0lb
- Breakout Force, Tilt Cylinder
- 7308.0lb
- Rated Operating Capacity with Optional Counterweight
- 4418.0lb
- Ground Contact Area
- 2504in²
- Ground Pressure
- 4.3psi
- Tipping Load
- 8338lb
- Breakout Force - Tilt Cylinder
- 7308lb
- Rated Operating Capacity with Optional Counterweight
- 4418lb
- Rated Operating Capacities - 50% Tipping Load
- 4150lb
- Rated Operating Capacities - 35% Tipping Load
- 2905lb
-
Service Refill Capacities
-
- Cooling System
- 3.7gal
- Engine Crankcase
- 2.6gal
- Fuel Tank
- 26.0gal
- Hydraulic System
- 15.0gal
- Hydraulic Tank
- 11.0gal
- Cooling System
- 3.7gal (US)
- Engine Crankcase
- 2.6gal (US)
- Fuel Tank
- 26gal (US)
- Hydraulic System
- 15gal (US)
- Hydraulic Tank
- 11gal (US)
-
Dimensions
-
- Length of Track on Ground
- 69.6in
- Length w/Bucket on Ground
- 150.4in
- Length w/o Bucket
- 122.1in
- Height to Top of Cab
- 83.3in
- Max. Overall Height
- 162.3in
- Bucket Pin Height at Max. Lift
- 129.4in
- Bucket Pin Height at Carry Pos.
- 7.7in
- Clearance at Max. Lift/Dump
- 98.1in
- Ground Clearance
- 9.1in
- Departure Angle
- 38°
- Maximum Dump Angle
- 51°
- Turn Radius from Ctr - Rear
- 69.9in
- Turn Radius from Ctr - Coupler
- 57.9in
- Turn Radius from Ctr - Bucket
- 91.1in
- Max. Reach w/Arms Parallel
- 49.9in
- Rack Back Angle at Max Height
- 83°
- Bucket Pin Reach at Max Lift
- 14.7in
- Length - Track on Ground
- 69.6in
- Length - With Bucket on Ground
- 150.4in
- Length - Without Bucket
- 122.1in
- Height - Top of Cab
- 83.3in
- Maximum Overall Height
- 162.3in
- Bucket Pin Height - Maximum Lift
- 129.4in
- Bucket Pin Height - Carry Position
- 7.7in
- Clearance at Maximum Lift and Dump
- 98.1in
- Ground Clearance
- 9.1in
- Departure Angle
- 38°
- Maximum Dump Angle
- 51°
- Turn Radius from Center - Rear
- 69.9in
- Turn Radius from Center - Coupler
- 57.9in
- Turn Radius from Center - Bucket
- 91.1in
- Maximum Reach - With Arms Parallel
- 49.9in
- Rack Back Angle - Maximum Height
- 83°
- Bucket Pin Reach - Maximum Lift
- 14.7in
- Overall Length - Track
- 89.4in
- Vehicle Width
- 78in
- Reach at Maximum Lift/Dump
- 30in
-
Hydraulic System
-
- Hydraulic Flow
- Standard
- Loader Hydraulic Pressure
- 3335.0psi
- Loader Hydraulic Flow
- 22.0gal/min
- Hydraulic Power
- 42.8hp
- Hydraulic Flow
- High Flow XPS
- Max. Loader Hydraulic Pressure
- 4061.0psi
- Max. Loader Hydraulic Flow
- 33.0gal/min
- Hydraulic Flow (1)
- Standard
- Loader Hydraulic Pressure
- 3335psi
- Loader Hydraulic Flow
- 22gal/min
- Hydraulic Power
- 42.8mm H2O
- Hydraulic Flow (2)
- High Flow XPS
- Maximum Loader Hydraulic Pressure
- 4061psi
- Maximum Loader Hydraulic Flow
- 33gal/min
-
Cab
-
- ROPS
- SAE J1040 MAY94, ISO 3471:1994
- FOPS
- SAE J1043 SEPT87, ISO 3449:1992 Level I
- FOPS Level II
- SAE J231 JAN81, ISO 3449:1992 Level II
- ROPS
- SAE J1040 MAY94, ISO 3471:1994
- FOPS
- SAE J1043 SEPT87, ISO 3449:1992 Level I
- FOPS Level II
- SAE J231 JAN81, ISO 3449:1992 Level II
Standard Equipment:
-
- Electrical
-
- 12 volt Electrical System
- 90 ampere Alternator
- Automatic Glow Plug Activation
- Ignition Key Start/Stop Switch
- Lights: Gauge backlighting, two rear tail lights, two rear working lights, two adjustable front halogen lights, dome light
- Backup Alarm
- Heavy Duty Battery, 880 CCA
-
- Operator Environment
-
- Gauges: Fuel level, hour meter
- Operator Warning System Indicators: Air Filter Restriction, Alternator Output, Armrest Raised/Operator Out of Seat, Engine Coolant Temperature, Engine Oil Pressure, Glow Plug Activation, Hydraulic Filter Restriction, Hydraulic Oil Temperature, Parking Bra
- Vinyl seat, mechanical suspension
- Fold-in Ergonomic Contoured Armrest
- Control Interlock System, when operator leaves seat or armrest raised: Hydraulic System Disables, Hydrostatic Transmission Disables, Parking Brake Engages
- ROPS Cab, Open, Tilt Up
- FOPS, Level I
- Top and Rear Windows
- Headliner, Deluxe
- Floor Mat
- Interior Rear View Mirror
- 12 volt Electric Socket
- Horn
-
- Power Train
-
- Cat C3.4 DIT Tier 3 Compliant Diesel Engine
- Air Cleaner, Dual Element, Radial Seal
- SOSSM Sampling Valve, Hydraulic Oil
- Filters, Spin-on, Hydraulic
- Filters, Bayonet-type, Fuel and Water Separator
- Tilt Up Radiator/Hydraulic Oil Cooler
- Spring Applied, Hydraulically Released, Wet Multi Disc Parking Brake
- Hydrostatic Transmission, 2-Speed
-
- Other
-
- Suspension, Torsion Axles
- Engine Enclosure, Lockable
- Extended Life Antifreeze, -37° C (-34° F)
- Machine Tie Down Points (4)
- Support, Lift Arm
- Hydraulic Oil Level Sight Gauge
- Radiator, Expansion Bottle
- Cat ToughGuard™ Hose
- Auxiliary, Hydraulics, Continuous Flow
- Heavy Duty, Flat Faced Quick Disconnects
- Split D-Ring to Route Work Tool Hoses Along Side of Left Lift Arm
- Electrical Outlet, Beacon
- Belly Pan Cleanout
- Variable Speed Demand Fan
-
- Mandatory Equipment
-
- Hydraulics, Standard or High Flow XPS
- Quick Coupler, Mechanical or Hydraulic
- Seat Belt, 50 mm (2 in) or 75 mm (3 in)
- Comfort Package (must select one of the following):
- Open ROPS (C1): Radio Ready, Suspension Seat (no heater or door)
- Enclosed ROPS with Heat (C2): Cup Holder, Radio Ready, Seat (choice of Suspension or Air Ride), Heater and Defroster, Side Windows, Door (either Glass or Polycarbonate)
- Enclosed ROPS with A/C (C3): Features of C2 Package plus Air Conditioner
- Performance Package (must select one of the following):
- TL1: Two Speed
- TL2: Two Speed, Self Level
- TL3: Two Speed, Self Level, Advanced Machine Information and Control System (AMICS)