|
|
|
|
-
Generator
-
- Rating
- 80 ekW (100 kVA) Standby
- Standby Run Time (Full Load)
- 32 Hours
- Prime Run Time (Full Load)
- 34 Hours
- Prime Rating
- 70 ekW (87.5 kVA)
- Voltage
- 208 - 480 V
- Frequency
- 60 Hz
- Rating
- 80 ekW (100 kVA) Standby
-
Engine
-
- Model
- C4.4
- Type
- 4-cycle
- Model
- C4.4
- Type
- 4-cycle
-
Dimensions
-
- Width
- 44.5in
- Height
- 73.6in
- Length
- 129.1in
- Weight with Lube Oil and Coolant
- 5390lb
- Width
- 44.5in
- Height
- 73.6in
- Length
- 129.1in
- Weight - With Lube Oil and Coolant
- 5390lb
Standard Equipment:
-
- Engine
-
- Heavy duty industrial EPA Tier 3 compliant diesel engine.
-
- Cooling Radiator
-
- Radiator and cooling fan complete with protection guards, designed to cool the engine in ambient temperatures up to 43° C (110° F) without derate.
-
- Engine Filtration System
-
- Cartridge type dry air filters with restriction
-
- Exhaust System
-
- Critical silencer with flexible connector. All internal pipework lagged.
-
- Generator
-
- Screen protected and drip-proof, self exciting, self-regulating brushless generator with fully interconnected damper windings, IC06 cooling system and sealed-for-life bearings.
-
- Baseframe
-
- The complete generator set is mounted on a heavy duty fabricated steel baseframe.
-
- Fuel System
-
- Fuel feed and return lines to the engine are terminated at the baseframe mounted 24 hour extended capacity fuel tank. 3-way valves allow connection of auxiliary fuel tank.
-
- Control Panel
-
- EMCP 3.1 in a vibration isolated NEMA 1 sheet steel enclosure with a hinged lockable door.
-
- Distribution Panel
-
- Dual Bus Connections NEMA 1 enclosure with hinged lockable door and main bus connection studs enclosed with hinged transparent cover for easy access and operator safety.
-
- Documentation
-
- A full set of operation and maintenance manuals, circuit wiring diagrams, and instruction leaflets is provided.
-
- Sound Attenuated Enclosure
-
- A noise reducing enclosure surrounds the entire generator set.
-
- Factory Tests
-
- The generator set is load tested before dispatch.
-
- Equipment Finish
-
- All sheet metal components including the enclosure and the base tank are fully degreased, phosphated and chromated for anti-corrosive protection prior to painting with polyester powder.
-
- Standards
-
- The equipment meets the following standards: BS4999, BS5000, BS5514, IEC60034, EN61000-6, NEMA MG-1.22.
-
- Warranty
-
- Full manfacturer's warranty.