2020 Deister VGB-2512

Price: Request a Quote for Pricing

Hours:
0
Rating:
As-Is
Serial Num:
2005104
Used Hotline:
801-978-1411
Location:
Salt Lake City, UT
  • Oil Changes Every 500 Hours
  • Of Oil In The Vibrating Mech
  • Snubber Guards
  • Vibrating Mechanism Tube Is
  • Protected By 1/2" Thick
  • Oil Level Guages On The Outside
  • Rubber Flap Spring Protectors
  • Surface Of The Sideplate
  • Lubrication, Labyrnith Type
  • Dust And Oil Seals, 2.5 Gallons
  • Mechanism Tube Bolted To Side
  • Oil Fill And Drain Plugs Located
  • On The Outside Surface Of The
  • Bearing Housing
  • Deister Slingermist Oil Bath
  • 3/8" Thick Ar Replaceable Plates
  • Two Bearing Vibrating Mechanism
  • Located Between The Decks
  • 150 Mm Spherical Roller Bearings
  • 3" Nominal Openings At The Step
  • Bottom Deck Qty (5) 30" Long
  • 1" Nominal Openings At The Step
  • Sides Above Grizzly Section
  • Plates Bolted Between Sideplates
  • Removable Back Plates
  • 12' Long Grizzly Section
  • Belt Guard
  • Top Deck Qty (5) 30" Long Finger
  • Spring Load
  • 3/8" Thick Sideplates With
  • 5/8" X 3.5" Vertical Braces
  • With 3/4" Thick Steel Reinforced
  • 3/4"
  • At The Feed Protectec By 3/4"
  • Ar Steel Replaceable Wear Plate
  • Snubbers (friction Check)
  • Filters
  • Tms Deister Machine Po
  • Pump, Spin On Coarse And Fine
  • Condition Indicator Guage
  • Bypass Valve, Oil Sampling Valve
  • Hoses And One Spare Set Of
  • Deister System Saver Dual Stage
  • Oil Filtration Unit
  • Includes A 120 V Single Phase
  • Trunnion Type Spring Support
  • Motor Grounded Power Chord
  • Approximate Speed: 760 Rpm
  • Approximate Stroke :7/16" - 1/2"
  • Steel Flanged Vibrating
  • 40hp 1800 Rpm Motor
  • Apadter Kit For Deister System
  • C Section Wideband V Belts
  • And Motor Sheave
  • Grizzly Screen Parameters
  • Screen Angle: 10 Degrees
  • Adjustment - Bronze Sleeve
  • Between Bearing And Shaft
  • Deister Heavy Duty Pivoted
  • Motor Base
  • Replacebale Steel Shield
  • Eccentric Shaft With External
  • Counterweighted Flywheels Equipp
  • With Removable Plates For Stroke
  • Vibrating Grizzly - Includes
  • 12"x72lb Horizontal H Beam
  • Base C/w Guard Mounting Brackets
  • And Motor Support For Vg-2512
  • Plates
  • Oil Filters