2020 Masaba 36X70

Price: $160,000

Hours:
160
Rating:
As-Is
Serial Num:
2020293.294.295
Used Hotline:
801-978-1411
Location:
Salt Lake City, UT
  • Head Pulley.
  • Primer-1 Coat Of 2 Part Urethane
  • Paint-1 Coat Of 2 Part Urethane
  • Owener's Manual-2 Copies For
  • The Panel. Panels Mounted On
  • Driver Side (rh For Top)
  • Guards - Tail Pulley Guard,
  • Steel Shot Blasted
  • Parts And Maintenance.
  • 2021 Stock
  • Main Frame Bottom Conveyor-
  • 30" Deep Truss
  • Roll Off 3-pack
  • Belting - 3-ply 3/16" X 1/16"
  • Belt Splice - Vulcanized Splices
  • Belt Scraper - Flexco Ezp1
  • Take Ups - Screw Type
  • Troughing Idlers - Cema C, Ppi,
  • Trough Idlers, 48" Spacing
  • Return Idlers - Cema C, Ppi,
  • Transition Idlers - Cema C, Ppi,
  • Through Idlers
  • Switchgear- Three Panels With
  • One Starter Each For 20hp Motor.
  • Panels Can Be Wired Together In
  • Sealed 5" Steel Can Return
  • Idlers, 10' Spacing
  • Hopper - 6' Long With Adjustable
  • Customer. 100' Lead Cord On Each
  • Conv, Only One Power Source To
  • Series, Or Run Individually.
  • Control Cable With 2 Plugs By
  • Masaba. Lead Cord Plugs Done By
  • Top Conveyor W/right Hand Drive
  • Motor - Weg 20hp Electric With
  • Swing Down Cranks Jacks With
  • Winch And Cable
  • Sheave, Bushing, And Backstop
  • V-belt Drive - With Drive Guard
  • Sheave And Bushings
  • Gear Reducer -dodge Taii #4 With
  • Drive Pulley - Heavy Duty, 16"
  • Diameter, Rubber Lagged Drum
  • Capacity- 750 Tph Based On 100#
  • Belt Speed - 350 Fpm
  • Tail Shaft & Bearings - 2 15/16"
  • Drive Shaft & Bearings - 3 7/16"
  • Tail Pulley - Heavy Duty, 14"
  • Diameter, Self-cleaning Wing
  • Raise With Pin Lock Height Adjst
  • Discharge Heights -7'4" For
  • Bottom And Middle Conveyor
  • Chord Angles - 4" X 4" X 5/16"
  • Main Frame Mid & Top Conveyor-
  • Bottom Conveyor-4 11rx22.5 Tires
  • 12'3" For Top Conveyor
  • Tandem Walking Beam Axle On
  • 2 11rx22.5 Tires, Fixed Width
  • Axle.
  • Fixed Width Axle
  • Single Axle On Top Conveyors-
  • Conv For Unloading And Loading
  • Landing Legs (bottom Conveyor)
  • Rollers- Single Roller Set On
  • Head End Of Bottom And Middle
  • Brakes, Lights & Mud Flaps
  • Base Plate With 5th Wheel Pin
  • Lattice Angles - 2" X 2" X 3/16"
  • Rubber Flashing
  • Shaft With Dodge Scm Bearings
  • Drive - Class Ii Head Drive
  • Conveyor Belt
  • Tubular Undercarriage-manual
  • Per Cu/ft Of Material
  • Shaft With Dodge Type E Bearings
  • Towing/lift Eye
  • 20 Degree Sealed 5" Diameter
  • Pulley
  • V-belt Guard And Nip Guard On
  • Return Roll Guards
  • 35 Degree Sealed 5" Diameter