D3 Track-Type Tractor
|
|
|
|
|
|
|
|
-
Retrieval Winch
-
- Weight
- 1747lb
- Maximum Line Pull - Full Drum
- 20350lb
- Rope Diameter - Recommended
- 0.63in
- Maximum Line Speed - Bare Drum
- 50ft/min
- Speed
- Variable
- Maximum Line Pull - Bare Drum
- 32150lb
- Control
- Hydraulic
- Rope Diameter - Optional
- 0.75in
- Drum Capacity - Optional Cable
- 195ft
- Maximum Line Speed - Full Drum
- 79ft/min
- Drum Capacity - Recommended Cable
- 277ft
- Winch Drive
- Hydraulic
-
Engine
-
- Engine Model
- Cat® C3.6
- Power - Net
- 104HP
- Displacement
- 220in³
- Net Power - 2,200 rpm - SAE J1349
- 104HP
- Net Power - 2,200 rpm - ISO 9249/EEC 80/1269
- 104HP
- Note (1)
- Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
- Note (2)
- All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
-
High Performance Winch
-
- Control
- Hydraulic
-
Weights
-
- Operating Weight
- 20639.68lb
- Operating Weight - LGP
- 21369lb
- Operating Weight - LGP, 762 mm/30 in
- 21810lb
- Note (2)
- For machine with ripper, add 554 kg (1,222 lb).
- Note (1)
- Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
-
Cab
-
- ROPS
- ISO 3471:2008
- FOPS
- ISO 3449:2005 Level II
-
Transmission
-
- Drive Pumps
- 1
- Maximum Travel Speed - Forward
- 5.6mile/h
- Maximum Travel Speed - Reverse
- 6.2mile/h
- Track Motors
- 2
- Relief Valve Settings
- 7033psi
-
Undercarriage
-
- Ground Pressure - LGP
- 4.5psi
- Track Gauge - LGP
- 69in
- Length - Track on Ground - LGP
- 91in
- Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage
- 40
- Ground Pressure - LGP, 762 mm (30 in)
- 3.9psi
- Length - Track on Ground - LGP, 762 mm (30 in)
- 91in
- Shoe Width - LGP
- 26in
- Shoe Width - LGP, 762 mm (30 in)
- 30in
- Track Gauge
- 63in
- Number of Rollers - Each Side
- 7
- Track Gauge - LGP, 762 mm (30 in)
- 73in
-
Service Refill Capacities
-
- Cooling System
- 5gal (US)
- Final Drive - Each - LGP
- 2.6gal (US)
- Crankcase - With Filter
- 2.8gal (US)
- Diesel Exhaust Fluid (DEF) Tank
- 4.9gal (US)
- Transmission - Hydraulic Tank
- 23.8gal (US)
- Fuel Tank
- 51.5gal (US)
-
Hydraulic Controls
-
- Pump Output
- 17.2gal/min
- Relief Valve Settings
- 2988psi
-
Ripper
-
- Type
- Parallelogram
- Number of Shanks
- 3
- Height
- 6.5in
- Weight
- 1222lb
- Maximum Digging Depth
- 13.3in
- Maximum Reach - Ground Line
- 30.2in
- Overall Width
- 67.3in
- Maximum Ground Clearance Under Tip
- 17.6in
-
Winch
-
- Weight
- 1345lb
- Winch Drive
- Hydrostatic
- Control
- Hydraulic
- Speed
- Variable
- Maximum Line Pull - Full Drum
- 25000lb
- Throat Clearance
- 6.75in
- Rope Diameter - Recommended
- 0.63in
- Overall Width
- 29.2in
- Maximum Line Speed - Full Drum
- 207ft/min
- Rope Diameter - Optional
- 0.75in
- Maximum Line Pull - Bare Drum
- 40000lb
- Drum Capacity - Optional Cable
- 256ft
- Winch Length
- 27.76in
- Drum Width
- 10.8in
- Maximum Line Speed - Bare Drum
- 131ft/min
- Drum Capacity - Recommended Cable
- 371ft
- Drum Diameter
- 10in
-
Air Conditioning System
-
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
-
Dimensions
-
- BLADE: Blade Width - LGP
- 126.7in
- Track Gauge - LGP, 762 mm (30 in)
- 73in
- BLADE: Digging Depth - LGP
- 23.2in
- Track Gauge - LGP
- 67.9in
- BLADE: Blade Capacity (SAE) - LGP
- 3.06yd³
- BLADE: Blade Width at Maximum Angle - LGP
- 115.8in
- BLADE: Blade Cutting Edge Angle, Adjustable - LGP
- 52° to 58°
- Ground Clearance - LGP, 762 mm (30 in)
- 13in
- BLADE: Blade Height - LGP
- 39.8in
- BLADE: Blade Lift Height - LGP
- 30.2in
- Ground Clearance - LGP
- 13in
- Overall Length - With Blade - LGP, 762 mm (30 in)
- 169.6in
- Overall Length - With Blade - LGP
- 169.6in
- BLADE: Maximum Tilt - LGP
- 17.7in
- BLADE: Maximum Angle (either side) - LGP
- 25°
- Note
- With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in)
Standard Equipment:
-
- Power Train
-
- Air cleaner with precleaner, automatic dust ejection and underhood intake
- Aluminum bar plate cooling system (radiator, power train)
- Automatic traction control
- Cat C3.6 diesel engine
- Drive, auxiliary
- Dual path, closed loop, hydrostatic transmission
- Electric fuel pump
- Fuel/water separator
- Turbocharged aftercooled
-
- Electrical
-
- Alarm, backup
- Alternator, 150 amp, heavy duty
- Batteries, heavy duty, maintenance free, 1,000 CCA
- Diagnostic connector
- Four integrated front halogen lights, two rear halogen
- Horn, electric
- Starter, electric, 12 V, heavy duty
-
- Undercarriage
-
- SALT undercarriage (40 section)
- Carrier rollers
- Guards, front/rear guiding
- Seven roller track frame
- Track adjusters, hydraulic
- Track rollers, lifetime lubricated
-
- Hydraulic
-
- Hydraulic pump and oil
- Single lever, three function control
- Three valve hydraulics
-
- Cat Technology
-
- Low Slip Traction Control (included with ARO and Cat Grade 3D)
- Slope Indicate
- Stable Blade Lift and Tilt (included with ARO and Cat Grade 3D)
- Compatibility with radios and base stations from Trimble, Topcon, and Leica
- Capability to install 3D grade systems from Trimble, Topcon, and Leica
- Cat Product Link™ PLE643/PLE743 Cellular
-
- Operator Environment
-
- Armrests, adjustable
- Coat hook
- Controls, seat mounted, fore/aft adjustment
- Cup holders
- Eco Mode
- Electronic Monitoring system with gauge:
– Chassis slope indication
– Diesel exhaust fluid (DEF)
– Engine coolant temperature
– Fuel level
– Hydraulic oil temperature - Electronic security system
- Engine air cleaner service indicator
- Engine RPM and gear display
- Floor mat, rubber, heavy duty
- Foot pads, dash
- Hour meter, electronic
- Independent forward/reverse speed settings
- Mirror, rearview, inside
- Power port, 12 volt
- ROPS/FOPS canopy
- Seat, air suspended, cloth or vinyl
- Seatbelt, hi-vis retractable 76 mm (3")
- Seatbelt buckling indicator/reminder
- Single pedal combining decel and brake functions
- Speed recall
- Storage compartment
- Throttle switch, rotary
- Travel speed limiter, electronic
Optional Equipment:
-
- Power Train
-
- Air cleaner with external precleaner
- Installation, winch
-
- Electrical
-
- Four integrated front LED lights, two rear LED
-
- Undercarriage
-
- Abrasion undercarriage (36 section)
- Track Pairs
– Track, 510 mm (20 in)
– Track, 660 mm (26 in)
– Track, 762 mm (30 in)
-
- Hydraulic
-
- Four valve for use with ripper
- Four valve for use with winch
-
- Cat Technology
-
- Cat Grade with Slope Assist
- Cat Grade with 3D
- Blade Load Monitor (included with Cat Grade 3D)
- AutoCarry (included with Cat Grade 3D)
- Cat Product Link PLE683/PLE783 Cellular/Satellite
- Full-color 10 in (254 mm) touchscreen grade display
- Cat Command Console
- Cat Command Station
-
- Operator Environment
-
- Power Pitch
- Cab, with air conditioning
- Cab, polycarbonate windows and air conditioning
- Radio, AM/FM Bluetooth®
- Seat, air suspension, choice of:
– Vinyl, heated seat with heated controls
– Cloth, heated seat with heated controls
– Cloth, heated and ventilated seat with heated controls - Sound suppression
-
- Other
-
- Heater, engine, coolant 120 V/240 V
- Starting aid, ether
