Cat® Electric Rope Shovels combine immense payload capability with low maintenance requirements and high reliability to deliver the lowest cost-per-ton loading solution for long-life mines. Our smallest rope shovel, the Cat 7295 has a payload of 45 tonnes (50 tons) — about half the payload of our flagship 7495. But like its larger counterpart, the 7295 features AC IGBT electrics for greater uptime, lower operating costs and faster cycle times. The 7295 is cleaner and more efficient than diesel-powered machines, plus its regenerative braking technology feeds electrical energy back to the grid.
Dipper Payload 50 t
Dipper Capacity 19.1-38.2 m3 (25-50 yd3)
Working Weight - With Dipper and Standard Links 1748837 lb
Ballast - Furnished By Customer 352000 lb
Dipper Capacity 19.1-38.2 m3 (25-50 yd3)
Dipper Payload 50t
Note Dependent on application and material density.
Ballast - Furnished By Customer 352000lb
Note (1) These weights will vary slightly depending upon dipper and optional equipment selection.
Note (2) All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads.
Working Weight - With Dipper and Standard Links 1748837lb
Crawler Dimensions - Overall Width 182.9 cm (72 in) Treads, Standard 28.22in
Ground Bearing Pressure Ground bearing pressure is dependent upon many factors.
Ground Bearing Pressure - 182.9 cm (72 in) Treads 39in
Ground Bearing Pressure - Total Effective Bearing Area 315.6ft²
Hoist A motor coupled to two gear reductions drives a 137 cm (54 in) hoist drum.
Planetary Propel Dual-motor independent drive.
Swing Parallel shaft gear cases, driven by a vertically mounted motor, are located on either side of the revolving frame.
Upper Works Overall Width - Including Standard Walkways 41.33in
Cutting Height - Maximum 45ft
Cutting Radius - Maximum 67.59ft
Dumping Height - With Clearance to Open Dipper Door 27.56ft
Note (1) Optimal working ranges based on loading a Cat® 785D truck.
Note (2) *All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads.
Radius of Level Floor 48.88ft
Revolving Frame Tail Swing Radius 25.59in
Components (1) 6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room.
Components (2) External fast fill from lower level.
Type Automatic, single-line system for open gear lubricant and grease.
Drive IGBT Acutrol drive system.
Note Other voltages available to suit customer requirements.
Power Requirements - 50 Hz 6,000V, 6,600V, 7,200V
Power Requirements - 60 Hz 4,160V, 7,200V
Power Requirements - Average Power Demand 538-753 kW (721-1,010 hp)
Power Requirements - Peak power 2886hp
Power Requirements - Voltage 3 phase, 50/60 Hz, 7,200V
Components One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
Crowd Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
Note High impact ropes available as an option
Standard Rope Data - Boom Suspension - Diameter 2.75in
Standard Rope Data - Boom Suspension - No. 4
Standard Rope Data - Crowd - Diameter 2.25in
Standard Rope Data - Crowd - No. 1
Standard Rope Data - Dipper Trip - Diameter 0.625in
Standard Rope Data - Dipper Trip - No. 1
Standard Rope Data - Hoist - Diameter 2.375in
Standard Rope Data - Hoist - No. 2
Standard Rope Data - Retract - Diameter 2.25in
Standard Rope Data - Retract - No. 1
