The Cat® 272D3 XE Skid Steer Loader, with its powerful engine, high output hydraulic system, high lift forces and vertical lift design, provides the maximum performance for work tool productivity, digging, truck loading and material handling.
Gross Power - SAE J1995 110 HP
Rated Operating Capacity 3700 lb
Operating Weight 9573 lb
Net Power - SAE 1349 106 HP
Bore 3.9in
Displacement 232in³
Engine Model Cat C3.8 DIT (turbo)
Gross Power - SAE J1995 110HP
Net Flywheel Power 106HP
Net Power - ISO 9249 107HP
Net Power - SAE 1349 106HP
Peak Torque - 1,500 rpm - SAE J1995 276ft·lbf
Stroke 4.7in
Breakout Force - Lift Cylinder 6085lb
Breakout Force - Tilt Cylinder 7362lb
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA
Rated Operating Capacity 3700lb
Rated Operating Capacity with Optional Counterweight 3950lb
Tipping Load 7400lb
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA
Operating Weight 9573lb
Bucket Pin Height - Carry Position 9.3in
Bucket Pin Height - Maximum Lift 128.6in
Bucket Pin Reach - Maximum Lift 13.5in
Bumper Overhang - Behind Rear Axle 46.2in
Clearance at Maximum Lift and Dump 97.4in
Departure Angle 28°
Ground Clearance 10.4in
Height - Top of Cab 84in
Length - With Bucket on Ground 155in
Length - Without Bucket 127in
Maximum Dump Angle 51°
Maximum Overall Height 161.5in
Maximum Reach - With Arms Parallel to Ground 49.1in
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA
Rack Back Angle - Maximum Height 84°
Reach - Maximum Lift/Dump 29in
Roll Back Angle 28°
Turning Radius from Center - Bucket (racked) 90.6in
Turning Radius from Center - Coupler 57.7in
Turning Radius from Center - Machine Rear 74.7in
Vehicle Width over Tires 76in
Wheel Base 54.6in
FOPS ISO 3449:2005 Level I
ROPS ISO 3471:2008
Chain Box - Each Side 2.7gal (US)
Cooling System 4.1gal (US)
Diesel Exhaust Fluid (DEF) Tank 5gal (US)
Engine Crankcase 3.5gal (US)
Fuel Tank 31.7gal (US)
Hydraulic System 14.5gal (US)
Hydraulic Tank 10.3gal (US)
Hydraulic Flow - XE - Hydraulic Power (calculated) 94HP
Hydraulic Flow - XE - Maximum Loader Hydraulic Flow* 40gal/min
Hydraulic Flow - XE - Maximum Loader Hydraulic Pressure 4061psi
Note *When equipped with Cat 400 Series work tools.
Standard Flow Mode - Hydraulic Power - Calculated 44HP
Standard Flow Mode - Loader Hydraulic Flow 23gal/min
Standard Flow Mode - Loader Hydraulic Pressure 3335psi
Travel Speed - Forward or Reverse - One Speed 7.2mile/h
Travel Speed - Forward or Reverse - Two Speed 10.3mile/h
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Inside Cab** 83dB(A)
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2) **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spe
Note (3) ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Outside Cab*** 104dB(A)
12 volt Electrical System
100 ampere Alternator
Ignition Key Start/Stop Switch
Lights: Gauge Backlighting, Two Rear Tail Lights, Two Rear Halogen Working Lights, Two Adjustable Front Halogen Lights, Dome Light
Backup Alarm
Heavy Duty Battery, 1,000 CCA, with Battery Disconnect
Gauges: Fuel Level, DEF Level, Hour Meter
Operator Warning System Indicators: Air Filter Restriction, Alternator Output, Armrest Raised/Operator Out of Seat, Engine Coolant Temperature, Engine Oil Pressure, Air Inlet Heater Activation, Hydraulic Filter Restriction, Hydraulic Oil Temperature, Park Brake Engaged, Engine Emission System
High Back Cloth Seat with Air Suspension, Heated with Recline and Lumbar Support and Fully Adjustable Seat Mounted Controls
Fold In Ergonomic Contoured Armrest
Control Interlock System, when operator leaves seat or armrest raised: Hydraulic System Disables, Hydrostatic Transmission Disables, Parking Brake Engages
ROPS Cab, Enclosed, Tilt Up
FOPS, Level I
Top, Rear and Side Windows
Headliner, Deluxe
Floor Mat
Interior Rearview Mirror
12 volt Electric Socket
Horn
Hand (Dial) and Foot Throttle, Electronic with Decel Feature
Advanced Display with Rearview Camera: Full Color, 127 mm (5 in) LCD Screen, Advanced Multi-operator Security System, On-screen Adjustments for Implement Response, Hystat Drive Response, and Creep Control
Storage Compartment with Netting
Cat C3.8, Turbo Diesel Engine, Meeting Tier 4 Final and Stage V Emission Standards
Air Cleaner, Dual Element, Radial Seal
S·O·SSM Sampling Valve, Hydraulic Oil
Filters, Cartridge-type, Hydraulic
Filters, Canister-type, Fuel and Water Separator
Radiator/Hydraulic Oil Cooler (side-by-side)
Spring Applied, Hydraulically Released Parking Brakes
Hydrostatic Transmission, Two Speed with Speed Sensitive Ride Control
Four Wheel Chain Drive, 14 × 17.5 Tires
Engine Enclosure, Lockable
Extended Life Antifreeze, –37° C (–34° F)
Machine Tie Down Points (6)
Support, Lift Arm
Hydraulic Oil Level Sight Gauge
Radiator Coolant Level Sight Gauge
Radiator, Expansion Bottle
Cat ToughGuard™ Hose
Auxiliary, Hydraulics, Continuous Flow
Heavy Duty, Flat Faced Quick Disconnects with Integrated Pressure Release
Split D-Ring to Route Work Tool Hoses Along Side of Left Lift Arm
Electrical Outlet, Beacon
Belly Pan Cleanout
Variable Speed Demand Fan
Product Link™ PL240, Cellular
Quick Coupler, Mechanical or Powered
High Visibility Seat Belt, 50 mm (2 in) or 75 mm (3 in)
PERFORMANCE PACKAGE:
– Performance Package H3: XE Hydraulics, Dual Direction Electronic Self Level (Raise and Lower), Work Tool Return to Dig, Work Tool Positioner, and Electronic Snubbing (Raise and Lower)
COMFORT PACKAGE:
– Enclosed ROPS with A/C (C3): Foot Throttle, Headliner, Heater and Defroster, Side Windows, Cup Holder, Radio Ready, Air Ride Seat (High Back and Heated) and Door (Glass or Polycarbonate)
Beacon, Rotating
Engine Block Heater – 120V
Oil, Hydraulic, Cold Operation
Paint, Custom
Variable Speed Demand Fan with Reversing Functionality
External Counterweights
Product Link PL641, Cellular
Bluetooth® Radio with Microphone (AM/FM/Weather Band Receiver with USB and Auxiliary Input Jack)
