G3512 1000kW Gas Generator Set

G3512 1000kW Gas Generator Set

Displacement
3173 in3
Gas Standby Rating
1000kW
Weight
27500 lb
Engine Model
G3512

Gas Generator Sets Specification

Displacement
3173in3
Gas Standby Rating
1000kW

Generator Set Dimension

Weight
27500lb

Engine Specifications

Engine Model
G3512
Engine Model
G3512
Bore
6.7in
Stroke
7.5in
Displacement
3173in³
Aspiration
TA

Generator Sets Specification

Gas Standby Rating
1000 ekW

Generator Sets Specifications

Displacement
3173in³
Compression Ratio
9.7
Frequency
60 Hz
RPM
1800 rpm

Generator Set Dimensions

Weight
27500lb
Length
205.7in
Width
90in
Height
99.4in

Generator Set Specifications

Emissions/Fuel Strategy
U.S. EPA Certified for Non-Emergency Stationary Genset
Fuel Type
Natural Gas

Generator Set Configurations

Emissions/Fuel Strategy
U.S. EPA Stationary Emergency Certified

Standard Equipment:

  • Air Inlet
    • Two-element single-stage air cleaner with enclosure and service indicator
  • Control Panel
    • EMCP 4.3
  • Cooling
    • Jacket water and SCAC engine-driven pumps
    • Jacket water and SCAC thermostats
    • Package mounted radiator
    • LH or RG connections when radiator is not selected
  • Exhaust
    • Dry exhaust manifolds, insulated and shielded
    • Cat-flanged face outlet on turbocharger
    • Individual exhaust port and turbocharger outlet wired to integrated temperature sensing module (ITSM) with GCEM providing alarms and shutdowns
  • Fuel System
    • Throttle plate, 24V DC actuator, controlled by GECM
    • Fuel system is sized for 31.5 to 47.2 MJ/NM3 dry pipeline natural gas with pressure of 10.2 to 34.5KPa to the engine fuel control valve
    • Engine-installed electronic control valve
    • 24V DC energized-to-run (ETR) gas shutoff valve
    • Gas pressure regulator
  • General
    • Paint- Caterpillar Yellow except rails and radiators gloss black 
    • “Stationary Use Only” Label in Correspondence with EPA Nonroad Mobile SI rule 
    • Parts book
    • Crankshaft vibration damper and guard
    • Operation and maintenance manuals
    • RH Service
  • Starting/charging
    • Battery with cables and rack (shipped loose)
    • Jacket water heater
    • Electric Starter
  • Generator
    • SR5
    • Permanent Magnet Excitiation
    • Caterpillar's Digital Voltage Regulator (CDVR) including reactive droop capability, 3-phase voltage sensing, KVAR/PF modes, RFI suppression, and a min/max exciter
    • Anti-condensation space heater
    • Winding temperature detectors
    • NEMA Class H insulation
  • Governing System
    • ADEM A4
  • Ignition System
    • Electronic Ignition System (controlled by ADEM A4) 
    • Individual Cylinder Detonation Sensitive Timing (DST) 

Optional Equipment:

  • Air Inlet
    • Mounting brackets and piping
    • Air cleaner with precleaner
  • Control Panel
    • Local alarm module
    • Remote annunciator
    • Local PC monitoring
    • Remote PC monitoring
    • Engine failure relay
  • Circuit Breakers
    • Right, left, rear mounted
    • 3-pole (IEC 947-2 rated)
    • 100% rated, 3-pole (UL/CSA/IEC) 5th Digit Rating
    • S LSI, G LSIG, P LSIG-P, 4th Digit Type
    • 1200A, 3 Pole, UL-100% Rated P-Frame Circuit Breakers
    • 1600A, 2000A 3 Pole, UL-100% Rated R-Frame Circuit Breakers
    • 2000A 3 Pole, UL-100% Rated Masterpact Circuit Breakers
    • EMCP 4.3
    • Frame mounting
  • Cooling
    • Remote radiator for JW and SCAC circuits, level switch included but not wired
    • Coolant level drain line with valves, fan with guard
    • Inlet/Outlet connections
  • Exhaust
    • 305 mm (12 in.) muffler
    • 18, 25 dBA Attenuation
    • 305mm (12 in) spark arresting muffler
    • 305 mm (12in.) elbow
    • 305 mm (12 in.) flange
    • Flexible fittings
  • Fuel System
    • 3, 0-100 kPag, 4-20mA gas train pressure sensors
  • General
    • US AID emblem
    • Special paint order
    • Tool set
    • Digital diagnostic tool
  • Generator
    • Cable access box
    • Bearing temperature detectors
    • Generator air filter
    • Low voltage extension box
    • European bus bars
  • Starting/charging
    • 24V starting motors
    • 45A, 24V charging alternator (requires engine driven pumps)
    • 20A, 24VDC battery charger