G3304B Gas Compression Engine
|
|
|
|
|
|
|
|
-
Engine Specifications
-
- Minimum Rating
- 95.0bhp
- Maximum Rating
- 95.0bhp
- Emissions
- NSPS 2010
- Displacement
- 427.0in3
- Compression Ratio
- 10.5:1
- Aspiration
- Naturally Aspirated
- Rotation (from flywheel end)
- Counterclockwise
- Flywheel and Flywheel Housing
- SAE No. 1
- Flywheel Teeth
- 156
- Oil Change Interval
- 750
- Stroke
- 6.0in
- Bore
- 4.8in
- Minimum Rating
- 95BHP
- Maximum Rating
- 95BHP
- Emissions
- NSPS 2010
- Displacement
- 427in³
- Compression Ratio
- 10.5:1
- Aspiration
- Naturally Aspirated
- Rotation from Flywheel End
- Counterclockwise
- Flywheel and Flywheel Housing
- SAE No. 1
- Flywheel Teeth
- 156
- Oil Change Interval
- 750
- Stroke
- 6in
- Bore
- 4.8in
- Weight - Dry
- 2253.8lb
- Ignition, Protection
- ADEM™ A4
- Air/Fuel Ratio Control
- ADEM™ A4
-
Capacity for Liquids
-
- Cooling System
- 4.23gal
- Lube Oil System (refill)
- 8.19gal
- Cooling System
- 4.23gal (US)
- Lube Oil System - Refill
- 8.19gal (US)
Standard Equipment:
-
- Air Inlet System
-
- Air cleaner — intermediate duty, dry
- Air cleaner rain cap (shipped loose)
- Service indicator
-
- Control System
-
- ADEM A4
-
- Cooling System
-
- Thermostats and housing — full open temperature 97°C (207°F)
- Jacket water pump — gear-driven, centrifugal, non-self-priming
-
- Exhaust System
-
- Exhaust manifolds — watercooled
- Exhaust elbow — dry 102 mm (4 in)
- Three-way catalyst — 1.0 g and 0.5 g NOx catalyst options
-
- Flywheels & Flywheel Housings
-
- Flywheel, SAE No. 1
- Flywheel housing, SAE No. 1
- SAE standard rotation
-
- Fuel System
-
- Air/fuel ratio control
- Gas pressure regulator
- Requires 10.3-68.9 kPa (1.5-10 psi) gas
- Natural gas carburetor
-
- Ignition System
-
- ADEM A4 ignition
-
- Lube System
-
- Crankcase breather, top mounted
- Oil cooler
- Oil filter
- Oil pan, full sump
- Oil filler and dipstick
-
- Protection System
-
- The following parameters include alarm and shutdown
Optional Equipment:
-
- Charging Alternator
-
- 24V, 35A alternator
- 24V, 35A CSA alternator*
-
- Cooling System
-
- Radiators
- Jacket water pump inlet adapter
-
- Exhaust System
-
- Exhaust flex fitting — ANSI flange
- Exhaust elbow
- Catalyst harness
- ANSI flange
-
- Ignition System
-
- CSA certified electronics and ignition*
-
- Instrumentation
-
- Operator interface panel
- Operator interface panel enclosure
- 15', 25' and 50' interconnect harness
-
- Starting System
-
- Air pressure regulator
- Air start silencer
- Vane starter
- Electric starter
- Turbine starter
