G3406 Gas Compression Engine
|
|
|
|
|
|
|
|
-
Engine Specifications
-
- Minimum Rating
- 215.0bhp
- Maximum Rating
- 325.0bhp
- Emissions
- NSPS Site Compliant Capable
- Displacement
- 891.0in3
- Compression Ratio
- 9.4:1
- Aspiration
- Naturally Aspirated or Turbocharged-Aftercooled
- Rotation (from flywheel end)
- Counterclockwise
- Flywheel and Flywheel Housing
- SAE No. 1
- Flywheel Teeth
- 113
- Oil Change Interval
- 750 hours
- Stroke
- 6.5in
- Bore
- 5.4in
- Minimum Rating
- 215BHP
- Maximum Rating
- 325BHP
- Emissions
- NSPS Site Compliant Capable
- Displacement
- 891in³
- Compression Ratio
- 9.4:1
- Aspiration
- Naturally Aspirated or Turbocharged-Aftercooled
- Rotation from Flywheel End
- Counterclockwise
- Flywheel and Flywheel Housing
- SAE No. 1
- Flywheel Teeth
- 113
- Oil Change Interval
- 750 hours
- Stroke
- 6.5in
- Bore
- 5.4in
- Weight - Dry
- 3000lb
- Ignition, Protection
- Altronic III
-
Capacity for Liquids
-
- Cooling System
- 10.0gal
- Lube Oil System (refill)
- 20.0gal
- Cooling System
- 10gal (US)
- Lube Oil System - Refill
- 20gal (US)
Standard Equipment:
-
- Air Inlet System
-
- Air cleaner — heavy-duty
- Air cleaner rain cap
- Service indicator
-
- Control System
-
- Governor — Woodward PSG mechanical
- Governor locking — positive control
-
- Cooling System
-
- Thermostats and housing
- Jacket water pump
- Aftercooler water pump
- Aftercooler core
-
- Exhaust System
-
- Watercooled exhaust manifolds
- Dry exhaust elbow
-
- Flywheel & Flywheel Housing
-
- SAE No. 1 flywheel
- SAE No. 1 flywheel housing
- SAE standard rotation
-
- Fuel System
-
- Gas pressure regulator
- Natural gas carburetor
-
- Ignition System
-
- Altronic III ignition system
-
- Instrumentation
-
- Service meter
-
- Lube System
-
- Crankcase breather — top mounted
- Oil cooler
- Oil filter — RH
- Auxiliary oil reservoir
- Oil pan — full sump
- Oil filler in valve cover, dipstick — RH
-
- Mounting System
-
- Engine supports
-
- Protection System
-
- Shutoffs
-
- General
-
- Paint — Cat yellow
- Crankshaft vibration damper and drive pulleys
- Lifting eyes
Optional Equipment:
-
- Air Inlet System
-
- Precleaner
-
- Charging System
-
- Battery chargers
- Charging alternators
- Charging alternators f/u/w c customer supplied shutoffs
- Ammeter gauge
- Ammeter gauge and wiring
- Control mounting
-
- Control System
-
- PSG Woodward governor
-
- Cooling System
-
- Radiators
- Non-sparking blower fan
- Blower fans for customer supplied radiators
- Fan drives for customer supplied radiators
- ATAAC conversion
- Aftercooler
- Expansion tank
- Heat exchangers
-
- Exhaust System
-
- Flexible fittings
- Elbow
- Flange
- Pipe
- Rain cap
- Muffler
-
- Fuel System
-
- Fuel filter
- Natural gas valve and jet kits
-
- Ignition System
-
- CSA shielded ignition
- Wiring harness
-
- Instrumentation
-
- Gauges and instrument panels
-
- Lube System
-
- Auxiliary oil reservoir removal
- Lubricating oil
-
- Mounting System
-
- Vibration isolators
-
- Power Take-offs
-
- Auxiliary drive pulleys
- Enclosed clutch and clutch support
- Front stub shaft and flywheel stub shaft
-
- Protection System
-
- Gas valves
-
- Starting System
-
- Air starting motor
- Electric air start control
- Air pressure regulator
- Air silencer
- Electric starting motor— single 12- and 24-volt
- Starting aids
- Battery sets, cables, and rack
-
- General
-
- Damper guard
