G3606 A4 Gas Engine
|
|
|
|
|
|
|
|
-
Engine Specifications
-
- Minimum Rating
- 1875.0bhp
- Maximum Rating
- 2010.0bhp
- Emissions
- NSPS Site Compliant Capable
- Displacement
- 7762.0in3
- Compression Ratio
- 9.2:1
- Aspiration
- Turbocharged-Aftercooled
- Rotation (from flywheel end)
- Counterclockwise
- Flywheel Teeth
- 255
- Oil Change Interval
- 5000 hours
- Stroke
- 11.8in
- Bore
- 11.8in
- Minimum Rating
- 1875BHP
- Maximum Rating
- 2010BHP
- Emissions
- NSPS Site Compliant Capable
- Displacement
- 7762in³
- Compression Ratio
- 9.2:1
- Aspiration
- Turbocharged-Aftercooled
- Rotation from Flywheel End
- Counterclockwise
- Flywheel Teeth
- 255
- Oil Change Interval
- 5000 hours
- Stroke
- 11.8in
- Bore
- 11.8in
- Weight - Dry
- 36883lb
- Ignition, Protection
- Electronic (ADEM™ A4)
-
Capacity for Liquids
-
- Cooling System
- 124.0gal
- Lube Oil System (refill)
- 187.0gal
- Cooling System
- 124gal (US)
- Lube Oil System - Refill
- 187gal (US)
Standard Equipment:
-
- Air Inlet System
-
- Air cleaner — standard-duty inlet air adapter
-
- Control System
-
- A4 control system — provides electronic governing integrated with air/fuel ratio control and individual cylinder ignition timing control
- Electrical system and instrumentation certified for Class I, Division 2, Group D hazardous location. Includes entire ADEM A4 system and optional control panel.
-
- Cooling System
-
- Jacket water pump
- Jacket water thermostats and housing
- Aftercooler/oil cooler pump
- Aftercooler/oil cooler thermostats and housing
- Two-stage aftercooler
- Jacket water heater connections
- Standard ANSI connections
-
- Exhaust System
-
- Dry exhaust manifolds
- Single vertical outlet adapter
- Stainless steel encapsulated insulation
-
- Flywheels And Flywheel Housing
-
- SAE standard rotation
-
- Fuel System
-
- Gas admission valves -- electronically controlled fuel supply pressure
-
- Ignition System
-
- A4 control system — senses individual cylinder detonation and controls individual cylinder timing
-
- Lube System
-
- Crankcase breathers (top mounted)
- Oil cooler
- Oil filter
- Oil pan drain valves -- front and rear
-
- Mounting System
-
- Engine mounting feet (four total)
-
- Protection
-
- Electronic shutoff system with purge cycle
- Crankcase explosion relief valves
- Gas shutoff valve
-
- Starting System
-
- Air starting system
-
- General
-
- Paint — Cat yellow
- Vibration dampers
Optional Equipment:
-
- Air Inlet System
-
- Heavy-duty air cleaner with precleaners
-
- Charging System
-
- 35 Amp & 65 Amp charging alternators – CSA approved
-
- Exhaust System
-
- Flexible bellows adapters
- Exhaust expander
- Weld flanges
-
- Fuel System
-
- Fuel filter
- Gas pressure regulator
- Flexible connection
-
- Instrumentation
-
- LCD display panel
- Remote data monitoring and speed control
- Color HMI display
- Compatible with Cat® Electronic Technician (ET) and Data View
- Modbus and Ethernet capable
-
- Lube System
-
- Air or electric motor-driven prelube
- Duplex oil filter
- RH Service
- Lube oil makeup system
-
- Mounting System
-
- Mounting plates (set of four)
- Extra mounting feet (set of two)
- Extra mounting plates (set of two)
-
- Power Take-offs
-
- Front stub shafts
-
- Starting System
-
- Air pressure reducing valve
-
- General
-
- Engine barring device
- Damper guard
