G3612 A4 Gas Compression Engine
|
|
|
|
|
|
|
|
-
Engine Specifications
-
- Minimum Rating
- 3750.0bhp
- Maximum Rating
- 4000.0bhp
- Emissions
- NSPS Site Compliant Capable
- Displacement
- 15528.0in3
- Compression Ratio
- 9.2:1
- Aspiration
- Turbocharged-Aftercooled
- Rotation (from flywheel end)
- Counterclockwise
- Flywheel Teeth
- 255
- Oil Change Interval
- 5000 hours
- Stroke
- 11.8in
- Bore
- 11.8in
- Minimum Rating
- 3750BHP
- Maximum Rating
- 4125BHP
- Emissions
- NSPS Site Compliant Capable
- Displacement
- 15528in³
- Compression Ratio
- 9.2:1
- Aspiration
- Turbocharged-Aftercooled
- Rotation from Flywheel End
- Counterclockwise
- Flywheel Teeth
- 255
- Oil Change Interval
- 5000 hours
- Stroke
- 11.8in
- Bore
- 11.8in
- Weight - Dry
- 58500lb
- Ignition, Protection
- ADEM™4
-
Capacity for Liquids
-
- Cooling System
- 194.0gal
- Lube Oil System (refill)
- 272.0gal
- Cooling System
- 194gal (US)
- Lube Oil System - Refill
- 272gal (US)
Standard Equipment:
-
- Air Inlet System
-
- Air cleaner — standard duty Inlet air adapter
-
- Control System
-
- A4 control system — provides electronic governing integrated with air/fuel ratio control and individual cylinder ignition timing control
-
- Cooling System
-
- Jacket water pump
- Jacket water thermostats and housing
- Aftercooler pump
- Aftercooler water thermostats and housing
- Two-stage aftercooler
-
- Exhaust System
-
- Dry wrapped exhaust manifolds
- Vertical outlet adapter
-
- Flywheel & Flywheel Housing
-
- SAE standard rotation
-
- Fuel System
-
- Gas admission valves -- electronically controlled fuel supply pressure
-
- Ignition System
-
- A4 control system — senses individual cylinder detonation and controls individual cylinder timing
-
- Lube System
-
- Crankcase breathers — top mounted
- Oil cooler
- Oil filter
- Oil pan drain valve
-
- Mounting System
-
- Engine mounting feet (six total)
-
- Protection System
-
- Electronic shutoff system with purge cycle
- Crankcase explosion relief valves
- Gas shutoff valve
-
- Starting System
-
- Air starting system
-
- General
-
- Paint — Cat yellow
- Vibration dampers
Optional Equipment:
-
- Air Inlet System
-
- Heavy-duty air cleaner with precleaners and rain protection
-
- Charging System
-
- 35 Amp & 65 Amp chargin alternators - CSA approved
-
- Exhaust System
-
- Flexible bellows adapters
- Exhaust expander
- Weld flanges
-
- Fuel System
-
- Fuel filter
- Gas pressure regulator
- Flexible connection
- Low energy fuel system
- Corrosive gas fuel system
-
- Instrumentation
-
- Remote data monitoring and speed control
- Compatible with Cat Electronic Technician (ET) and Data View
- LCD display panel
- Color HMI display
- Modbus and Ethernet capable
-
- Lube System
-
- Air or electric motor-driven prelube
- Duplex oil filter
- RH service
- Lube oil makeup system
-
- Mounting System
-
- Mounting plates (set of six)
-
- Power Take-offs
-
- Front stub shafts
-
- Starting System
-
- Air pressure reducing valve
- Natural gas starting system
-
- General
-
- Engine barring device
- Damper guard
