3512C (HD) Land Mechanical Drilling Engine

3512C (HD) Land Mechanical Drilling Engine

Cat 3512C (HD) engines set the standard in the drilling industry. For many years the 3500 has been the preferred choice by drillers due to their high performance, durability, and reliability in the oilfield while maintaining low emissions.The ideal application for the 3512C (HD) engine is mechanical drive for land drilling rigs.3512C (HD) engines, with ratings: 932-1100 bkW (1250-1475 bhp) @ 1200 rpm meet U.S. EPA Non-road Tier 2 equivalent and CARB Tier 2 equivalent emission standards. They are available using U.S. EPA and EU Flexibility, and for other regulated and non-regulated areas.

  • Maximum Rating 1475 BHP

  • Emissions U.S. EPA Non-road Tier 2

  • Displacement 3574 in³

  • Minimum Rating 1250 BHP

Request a quote

Product Specifications

Specifications

Engine Specifications

  • Aspiration Turbocharged-Aftercooled

  • Bore 6.69in

  • Displacement 3574in³

  • Emissions U.S. EPA Non-road Tier 2

  • Engine Weight - Net Dry 11945lb

  • Flywheel Teeth 183

  • Flywheel and Flywheel Housing SAE No. 00

  • Governor and Protection ADEM A3

  • Maximum Rating 1475BHP

  • Minimum Rating 1250BHP

  • Oil Change Interval 500

  • Rated Speed 1200r/min

  • Rotation from Flywheel End Counterclockwise

  • Stroke 8.46in

Capacity for Liquids

  • Minimum Cooling System - Engine Only 41gal (US)

Dimensions

  • Height 79.5in

  • Length 105.6in

  • Width 70.5in

Features

Equipment

Standard Equipment

  • Separate circuit aftercooler core — corrosion resistant coated (airside), air cleaner (single element w/service indicator)

  • Dual rear-mounted turbochargers

  • ADEM A3 ECU — LH

  • Electronic fuel injector fuel system (10 amp DC power required todrive electronic engine control unit)

  • Torque converter connections

  • Thermostats and housing, jacket water pump, gear-drivencentrifugal

  • Connections for radiator cooling

  • Dual outlets: 88.9 mm O.D. (3.5 in) elbow hose connections

  • Separate Circuit Aftercooler (SCAC)

  • Exhaust manifold — dry, stainless steel bellows

  • Dual turbochargers with watercooled bearings

  • Exhaust outlet: 292 mm I.D. (11.5 in), 12-10.5 mm dia. holes EQ SP,376 mm bolt hole dia.

  • Flywheel, SAE No. 0 — 151 teeth

  • Flywheel housing — SAE No. 0

  • Primary fuel filter

  • Fuel priming pump

  • Fuel filter — RH spin-on type

  • Fuel transfer pump

  • Electronically controlled unit injectors

  • Electronic instrument panel

  • Instrumentation readouts:

  • Crankcase breather — top-mounted

  • Oil cooler

  • Oil filler and dipstick — RH

  • Oil pump

  • Oil filter — RH spin-on type

  • Rear sump oil pan, 250-hour change interval

  • Oil pan drain valve — 3/4" NPT female connection

  • Rails — mounting, floor type

  • Front housing — two-sided

  • ADEM A3 ECU system to provide customer-programmableengine deration strategies to protect against adverse operatingconditions

  • Emergency stop logic inputs provided at 40-pin customer interfaceconnection

  • Air inlet shutoff

  • Air starting motor — RH, 620 to 1034 kPa (90 to 150 psi)

  • Air silencer

  • Paint — Cat yellow

  • Vibration damper and guard

  • Lifting eyes

  • B-Series LAND

Optional Equipment

  • Air cleaner and air cleaner mounting

  • Remote air inlet adapters

  • Air inlet heater

  • Battery chargers

  • Charging alternators

  • Local speed throttle control

  • Throttle position sensors

  • Load sharing modules

  • Governor conversion

  • High gloss black folded core radiators

  • Coolant regulator conversion

  • Belt guard and radiator guard

  • Blower fan

  • Radiator cover

  • Fan drive and fan pulleys

  • Water level switch gauge

  • Coolant level sensors

  • Coolant conditioner

  • Expansion tank

  • Heat exchanger cooling conversion

  • Auxiliary water pump

  • Air separator

  • Flexible exhaust fitting

  • Elbows and flange

  • Flange and exhaust adapters

  • Manifold and mufflers

  • Flexible fuel lines

  • Fuel cooler

  • Water/fuel separator

  • Fuel level switch

  • Customer management device

  • Remote panel display and remote cylinder temperature display

  • Switches and contactors

  • Gauges and instrument panels

  • Fumes disposal

  • Oil pans

  • Prelube options

  • Sump pumps

  • Oil Filters

  • Vibration isolators

  • Front housing

  • Flexible couplings

  • Coupling hub

  • Front accessory drives

  • Auxiliary drive shaft

  • Auxiliary drive pulleys

  • Front stub shaft

  • Damper guard removal

  • Pulleys

  • Flywheel stub shaft

  • Shutoffs

  • Switches and contractors

  • Explosion relief valve

  • Sensors

  • Oil pressure monitor

  • Shutoff controls

  • Corrosion protection

  • Air starting motors — electric

  • Air pressure regulator

  • Air silencer

  • Air start controls — manual, electric

  • Redundant start

  • Starting aids

  • Battery sets – 24V

  • Battery cable and battery rack