801-974-0511

C18 ACERT Tier 4 Final

  • Home »
  • New Powers » C18 ACERT Tier 4 Final
    Order Parts Request Service

    C18 ACERT Tier 4 Final

    Download Product Brochure
    Email/Share
    Minimum Rating
    755.0 bhp
    Maximum Rating
    800.0 bhp
    Emissions
    U.S. EPA Non-road Tier 4 Final
    Rated Speed
    1800.0 RPM

    Engine Specifications

    Minimum Rating
    755.0bhp
    Maximum Rating
    800.0bhp
    Emissions
    U.S. EPA Non-road Tier 4 Final
    Rated Speed
    1800.0RPM
    Bore
    5.7in
    Stroke
    7.2in
    Displacement
    1104.0in3
    Aspiration
    Turbocharged-Aftercooled
    Engine Weight, net dry
    3482.0lb
    Oil Change Interval
    250 - 500
    Rotation (from flywheel end)
    Counterclockwise
    Flywheel and Flywheel Housing
    SAE No. 0 or SAE No. 1
    Flywheel Teeth
    136 (SAE 0), 113 (SAE 1)
    Governor and Protection
    ADEM A4
    Minimum Rating
    755BHP
    Maximum Rating
    800BHP
    Emissions
    U.S. EPA Non-road Tier 4 Final
    Rated Speed
    1800r/min
    Bore
    5.7in
    Stroke
    7.2in
    Displacement
    1104in³
    Aspiration
    Turbocharged-Aftercooled
    Engine Weight - Net Dry
    3482lb
    Oil Change Interval
    250 - 500
    Rotation from Flywheel End
    Counterclockwise
    Flywheel and Flywheel Housing
    SAE No. 0 or SAE No. 1
    Flywheel Teeth
    136 (SAE 0), 113 (SAE 1)

    Dimensions

    Length
    60.2in
    Width
    37.8in
    Height
    50.5in
    Length
    60.2in
    Width
    37.8in
    Height
    50.5in

    Capacity for Liquids

    Minimum Cooling System - Engine Only
    7.1gal (US)

    Standard Equipment:

    • Air Inlet System
      • Turbocharged Aftercooled
    • Control System
      • Electronic control system, over-foam wiring harness, automatic altitude compensation, power compensated for fuel temperature, configurable software features, engine monitoring system SAE J1939 broadcast and control, integrated Electronic Control Unit (ECU) remote fan control
    • Cooling System
      • Vertical outlet thermostat housing, centrifugal water pump
    • Exhaust System
      • Dry exhaust manifold, Diesel Oxidation Catalyst (DOC)
    • Flywheels And Flywheel Housing
      • SAE 0 and SAE 1 flywheel housing
    • Fuel System
      • MEUI injection; primary fuel filter, secondary fuel filters, fuel transfer pump, electronic fuel priming
    • Lube System
      • Open crankcase ventilation system, oil cooler, oil filler, oil filter, oil dipstick, oil pump (gear driven), choice of sumps (front, rear, high-capacity center, and high-capacity front)
    • Power Take Off
      • SAE B and SAE C drives available, engine power can also be taken from the front of the engine on some applications
    • General
      • Paint: Cat yellow; vibration damper; lifting eyes

    Optional Equipment: